View Full Version : Auxiliary Injection
- Coolingmist varicool trunkmount kit
- Pressure gauge set-up
- coolingmist boost adjustment
- Injector Location
- Placement of Vari-Cool Controller
- AI comparison
- Nozzle placement
- Bad location? Or Bigger Injector?
- It's been mentioned about leaner afr's with aux injection but how about low octane?
- Help Activate David Hayes' Aquamist Water Injection System
- Injector Identification.
- Homemade Intercooler Sprayer
- WI Nozzle Location ???
- super atomizing injectors
- 50/50 to 75/25 mix...
- Alcohol and Water vs. Gasoline - Modes of Action and Efficacy
- Economist Magazine - Water Injection
- AI temperatures......
- Water freezing over?
- Which simple kit is best?
- Which kits are plug N play?
- my preturbo kit from dudemaaans is installed!
- Fuel Table
- riceracing kits?
- My coolingmist stage1 install
- Pre-turbo and its effects on the Compressor map
- aux injection air temp sensor & injector placement.
- CDI Systems with Water Injection
- MY DevilsOwn Pre Turbo water injection.
- Pics of my installation of my Snow Performance kit.
- AEM water/meth how to install for FD
- FJO Part number confusion
- All 3rd gen guys running coolingmist AI
- What meth to use?
- meth tubinb/braided line
- found a pretty cool video
- Anti rust/lubricant/cleaner type additive for water inj??
- Hydrogen Peroxide
- Air temp fuel correction table
- Xcessive Intake Manifold
- Tank mounting location heat soak concern. Nozzle question as well.
- An Idea I had as of why pre-turbo water injection works so well
- Mr. Clean Injection...
- Larger intercooler = Water injection?
- Feeding the Turbo Rotary: Horsepower, Airflow, Fuel Injector Sizing w 2014 turbos
- AI/ H2o injection tank Locations ?
- Humidity and O2 Dilution
- Would using AI lower petrol consumption?
- Another significant benefit of AI
- Raceonly 700rwhp In car Video Water Injected Pump FUEL
- Aquamist, tank and pump heigh help!!!
- HFS-6 and the Summer module - Is it needed?
- AEM water injection install write up
- pre-compressor nozzle location for TT
- Push-to-connect fittings and tubes
- FJO pressure sensor leaking
- Where to pull boost press. for injection controller?
- Feeding the Turbo Rotary: Horsepower, Airflow, Fuels
- Stoich AFR's for mixed gasoline and methanol
- injector location
- Nice pre-comp injection pic...
- Aquamist's new HFS-3 will replace the HFS-1 (single stage system)
- WI tank idea?
- water injection system preferred brand?
- Methenol injection
- need answer: a CENTRAL AI QUESTION
- Tank to pump and pump to jet hose diameters?
- Christmas time! But which kit to get.....
- Who makes a good water injection kit.
- Will running Aquamist on car 400-600rwhp?
- AI only dyno
- Shopping for a WI kit
- h202
- methanol injection (AI) vs E85
- Cooling Mist..anyone have a "schematic"?
- water/methanol injection on 13bts5
- Meth injection
- FJO AI injection v.1.01 REMOVES boost control !
- effect of water injection in catalytic converters?
- who makes mechanical injection?
- Pre-compressor water inj- is it VITAL to spray towards centre of comp wheel?
- aftermarket temp gauges
- AI finally installed. Some Problems.
- Two stage WI system?
- running water as a safety
- Tune needed when running AI?
- ERL/Aquamist Race Pump Testing
- Got a question
- pre-turbo injection
- GM AIT sensor before or after AUX injection?
- Tapping nozzle - bevelled edge?
- making your own 50/50 mix
- 703rwhp on 34psi PUMP fuel Water Only injection
- Meth % in washer fluids chart
- Testing your Auxiliary Injection system
- FD Auxillary Injection Component Install
- Results of adding an IC to AI only cars
- PWM Water Solenoids
- Recirculation pump Vs. Standard pumps
- The next BOMB shell in AI
- Turbochargers & Knock
- Water/AI components
- My cooling mist kit installed pics
- stock TII, where to inject?
- FJO sequential setup pics
- Washer fluid
- duel injection setup questions
- FJO setup questions for sequential twins
- What boost pressure are you comfortable with running your water only system?
- New Injection Point Idea
- A new generation of water/methanol tank design ...
- Sequential Turbo AI Install
- ? AI tank betweeen 51R battery & SMIC ?
- where to tap into RPM, ignition +12VDC, etc.
- Where and how big is your tank
- AI injectant getting to wastegate
- Coolingmist CMGS Kit who is using it?
- Al/Meth./Water. Air temp. sensor???
- Where is your controller mounted? i need a little advice
- anyone mixing with HEET?
- AEM Methanol Injection Kit
- Help with setup
- when to engage
- staged set-up, non progressive...
- nitrous and water/meth injection
- My custom "HD" aux injection system - LONG
- so my water kit stopped working?
- Picture Request: FD Water Injection Installs
- Pressurized AI reservoir tank?
- How "HD" are the HD kits?
- Kit for stock FD
- SS water/meth tank
- water/methanol injection
- Water vs Methanol - RWHP Info
- some picks of my ai install
- Tuning Up on Water Injection with E10.
- Quick Help on Cooling Mist setup
- 2009: new adventures with AI
- AI Trouble Shooting
- Quick and dirty Coolingmist M2 nozzle flow test
- FYI: Water hose kit
- Water/Meth Injection on Stock Twins?
- daily driving with AI
- Random Musings: Crower Cycle
- AI dyno #'s on pump
- fuel pump for injection pump?
- AI Installed
- staged activation
- Nitromethane Injection
- when to activate my mist?
- Who uses Water Injection?
- Calculate AI flow based on %Fuel volume flow (cc/min) or mass flow (lb/hr)?
- calculating flow based on pressure and nozzle size?
- More S-HSV, But Different
- coolingmist
- Water injections effects on sensors
- in need of expert answers for new meth inj system
- Cooling Mist (Shurflo) pump problems
- what concentration/ mix are you running?
- Pump mounting?
- Peace of Mind: Single-stage WI installation
- Shurflo pump leaking, rebuild?
- where do you place your jets?
- Devils own Vs. Cooling mist
- Where to Start???
- what is the MAX water delivery fo the FD?
- help me decide what kit!
- Power for the pump
- Nozzle vs AIT sensor placement on water only setup
- nozzle size for nearly stock car
- Methanol creation for AI purposes.
- what I'd like to do for an aux inj system in my FD
- RiceRacing System Installed, observations
- RiceRacing System Installed, observations
- Cooling Mist WooHoo!!!!
- Pros and Cons of Water-Meth injection
- Install my Aquamist 1s for just safety/peace of mind? yay or nay?
- filter help
- AEM Meth-Water injection risk of fire?
- Nozzle locations?
- My new meth system
- Which AI to choose?
- using PFC to control water injection
- Indepth study of WAI injection systems
- Installed Coolingmist Kit! First drive impressions
- using the winshield washer reservoir as a meth tank
- Aquamist HFS-5 will be replaced by HFS-6 in 2009
- water/alcohol injection on a 12a drawthru turbo setup....
- My BNR Pre-Turbo WI
- still no temp decrease, please help!
- Pump and Tank location for AI (pics anyone?)
- Which AI setup do you use and why?
- Anythoughts on Labonte motorsports AI sytem?
- Options for W/M Tank
- question about simple WI setup, aquamist pump.
- i got ?'s about auxilary injections
- good info on injection nozzle location
- Knock?
- VP M3 Methanol - be Cautious
- AlkyControl or AEM
- stock twins, reliable 300 hp weekend warrior on AI? lots of nooby questions!
- What is your tank setup and how long does it last? Post Pics!
- Controlling an injection pump with ECU PWM output
- Water injection on almost stock T2. your opinions pls.
- What Intercooler?
- Before AI? After AI??
- AI System Basics
- meth injection system on twins
- small datalog
- Water/Meth injection on twins
- WI for stock ECU
- FJO 100% Methanol Injection System Build-up (Howard Coleman Style)
- Going to make my own WI kit
- NEED HELP. questions AEM 50:50 w/m water/methanol injection system
- FMU based methanol injection
- what am i missing??? those running FJO H.C. maybe?
- Coolingmist status/clug light
- alki/methonal local source
- how long before it affects temp?
- FD custom WI tank installation
- First Water Injected 600RWHP AI 13B
- Cool way to control the Aux Injectors on Any ECU
- Building my AI setup
- Devilsown alky kit install
- Could i run aquamist methanol with pump gas @14psi stock turbos?
- Finally ready to join you Alkyholics...help confirm my choice
- roll over vent
- dual nozzle location
- Auxillary methanol fuel system?
- My DEVILS OWN (Non Intercooled E85) Dual Nozzle Build Thread.
- Help me Decide on NOZZLE(S) Locations................ *PIC*
- Peicing together KIT, where should I get nozzles, jets, one way valve and fittings?
- My AI build up thread
- Guys with Devils Own Systems........ Quick question for ya.
- Do you have to retune for alky injection?
- Anderson Mr. Freeze Meth Injection Kit? Anyone using it?
- WI under no load - bad idea?
- placing nozzle before IC
- Another nozzle ?
- Meth injection for a RB26 Skyline
- pre turbo injection on sequential twins.
- what can i get out of stock fc with meth ?
- Mixing water with methyl hydrate
- Tune Question Devils Own Stage 2
- Forging Fearlessly into new Frontiers w FJO
- Aquamist 2d, FIA2 and injector duty
- Help me find my ideal aux. system
- ***blown Engine***
- No more A/I? Were did the blue stuff go?
- How much water injection required to lower temps?