thought this might be helpful for those people wanting to use washer fluid when injecting...

I havnt heard anything bad about it. maybe someone can shed more light on this...

http://www.coolingmist.com/images/methlisting.jpg

 

ooo... thanks.

 

Does anybody know what else is normally in the fluid?

 

it tells you right in the image.

 

So which ones don't have deicer and all that **** in them? Anyone know prices too..cuz a gallon of meth is like $7, then a gallon of distilled water is $1, so $8 for 2 gallons of meth water 50/50

 

very good info.. but on the coolingmist forum it says "" I found this searching the net the other on another forum. This information is provided without warranty. We have not verified that any of these are safe for your vehicle. It is well known and assumed that many customers use these as fluids so this information is provided for the customer. We have not validated or verifed this information. Always do your own research.""

how do you find out the meth rating in it anyways?

 

probably with a hydrometer.

 

i dont know how to tell meth rating but i was looking at a bottle of Air brake antifreze and it says it contains 98% meth. could you use this

 

depends what the other 2% is...

 

i dont know what the other 2% is. it didnt say on the bottle.all it said was it was 98% cas# 67-56-1 and that was it.

 

im currently using washer fluid (For around 8months now).. i have no problems....
So is GoodfellaFD3S... Im sure he can shine some light on the specifics. once he sees this thread

Goo find on the chart sen2Two

 

i know some people using washer fluid and having good results. i was wanting to use the Air Brake Antifreeze cause it has a higher meth content.

 

I'm guessing the other 2% would be some form of oil, which would help prevent corrosion.
Do you find it cheaper and more readily available than 100% meth?
Dilute it with 50% water and give it a try.