I have just spent a couple hours looking for some good information on the design and layout of different injection systems.

There's a lot of info to be found here and elsewhere that talk about check-valves. solenoids, pressure switches, single and multiple nozzle systems, and much more.

What I can't find is information with diagrams showing the design of different systems, identifying each part, and the pros and cons of different approaches.

Sure, a lot of that has been discussed somewhat, but coming into it as someone completely new to AI, it would be nice to see some kind of a comprehensive document that lays it all out.

If it's already here, well, please point me to it.

It would be nice to have one or two documents like that to lay a foundation for understanding all the discussions on AI.

Thanks.

 

I'll try to whip something up. It is going ot take a little time.

 

Thanks, that would be great.

I've spent a fair bit of time trying to find something, didn't even find anything like that at a vendor site, which was kind of surprising.

 

While it lacks any system schematic, I found this page useful:

http://www.coolingmist.com/info.aspx?key=choose

 

I found some more useful documentation at the Coolingmist site:

Installation instructions: https://www.coolingmist.com/info.aspx?key=installdocs

There's a lot of useful detail in the install docs: diagrams, parts lists and instructions.

Schematics: https://www.coolingmist.com/diagrams.aspx

For some reason this page is labeled 'Videos', but is actually diagrams of various setup options, some from customer cars.

 

The following link may help you to identify how different system works.

http://forums.evolutionm.net/water-a...n-systems.html

 

^ Excellent information, thanks Richard.