A buddy recently got a Cooling mist kit,and I read the instructions.
It is So vague..really.
Quote from instructions."it is impossible to give step by step instructions due to the wide variety of vehicles that this kit is sold for.We can however give you Tips for installation"..
.WHAT>?..Holy ****..600 bucks for a Kit and NO instructions?
The tank has no Hole for the plumbing.How do you hook a line into the tank?
anyways.I am Just wondering If anyone has a Cooling Mist Stage 2 Boost/MAF Kit,and can give me some Pointers on Where to install it on an S4 TII.(small tank,not the truink mount tank).
I am sure I got the Wiring down to give it power,but there is a small Device that I don't know what it does,or where to hook it up.(has a threaded end for a hose and a Dial on it..to go from 0-120..and it has some spade connectors for wires).
Thanks Guys,.It sounded so easy to hook up..tank,pump,controller,and nozzle..but it is a little more Complex than I anticipated..Cheers Styx.

 

Let me try to help.



We do give instructions with it. I will link them at the bottom of the page.


if you have the underhood kit, the fitting is provided. Its a 1/8th NPT fitting (like one on your injection nozzles). You drill a hole with a 11/32 drill bit and either tap the plastic or screw the fitting in with a wrench. It will seal perfect.

that answers my question as far as what tank

here is your install document. you should have received this. You have our original vari-cool. the device with the **** is our status monitor, its referenced on the last page (page 7). Also a diagram is in this document as well.

BTW, since you dont have a MAF sensor, you will inject in boost only mode.

I had a FD for 10 years and a FB, I never had a FC but I am somewhat familiar. Ask what questions you need.

http://www.coolingmist.com/instructi...structions.pdf