FD Auxillary Injection Component Install
#1
FD Auxillary Injection Component Install
I'm in the middle of a AI install (an Aquamist 2d-ish system) and, like many, have had a hard time coming up with a clean install. Most of these systems come with a bag of random parts and you are pretty much on your own at installation time.
I've come up with a reasonably clean electronics project box solution for a few Aquamist components that I though others may find useful. The box mounts to the FD cruise control bracket. This solution is obviously Aquamist 2d specific but you could imagine doing something similar for other systems.
I plan to do a full write up (with schematics etc.) in a few weeks when I finish.
I've come up with a reasonably clean electronics project box solution for a few Aquamist components that I though others may find useful. The box mounts to the FD cruise control bracket. This solution is obviously Aquamist 2d specific but you could imagine doing something similar for other systems.
I plan to do a full write up (with schematics etc.) in a few weeks when I finish.
#4
Here is a schematic for the above project box. It basically controls 3 LEDs, which I have mounted on an RE Amemiya gauge pod. I don't have time to do a proper write up at the moment, but the pictures should be pretty self explanatory.
[img]
[img]
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
tiger18
3rd Generation Specific (1993-2002)
9
09-03-15 08:27 PM