Looking into installing this kit. For those who have and has worked successfully, what are your thoughts and opinions? What are the risks as well?

Thanks,

~Ant

 

there is a dedicated section for this, I suggest you check there

 

If you want to be creative you can make your own. Theres a guy using boost pressure to feed water into the intake through a reservoir and a nozzle (part listed on thread). He's running about 20 psi but you can probably make a similar system with a windshield washer pump since they have a similar pressure output. Buy some safeguard stuff and the boost pressure activated switch from an AI vendor and you have a cheaper AI kit. Difference (besides the wiring) will be that his setup is more linear and is probably easier to tune since its not on/off like the switch and pump but if you're looking into the cheaper AI kits then they're usually on/off as well.

 

http://www.coolingmist.com/detailmain.aspx?pid=Cool150

After some research, seems like this may be fitting for my application... only plan on running abou t 15 psi