- FJO Water Injection Discontinued?
- Basic AI Kit suggestion
- AI Use During Winter
- Pics of my A.I. tank ('s), misc. setup??
- Can I just slap it on?
- Foam from fuel cells
- when is it too much?
- Dual Fuel Setup
- AEM WI Install Tests
- Good H20 injection write-up on wiki
- Racelogic and Aquamist?
- AEM Observations
- Anyone know which kit this is?
- Dudemaaanownsanrx7 pre turbo kit
- Any advantage to HD-AI with 100% water?
- On my way to AI.
- Anyone in Canada run an Aquamist?
- E85/water injection substituted for meth/water injection?
- cooling mist new jets
- 100% Methanol HD-AI kits?
- AIC to control alchohol delivery
- Turbo Rotary survived the 24Hrs of Lemons
- AI Jet Placement
- AI Jet/Nozzle angle
- Aquamist Summer
- thelevman 534rwhp 24psi water only
- My water injection plan, is it crazy?
- Mineral deposits - cause for concern?
- HFS1 and summer
- Coolingmist Smart Injection
- Carbon build-up and turbos?
- Wiper fluid Meth/Water %s
- S5 pre turbo or other WI help
- water or methinal, pre turbo or post intercooler?
- Aquamist hfs-3 + summer kit help
- WI with IC Spray
- Cooling Mist CMGS install
- Opinions on mounting my water injection nozzle (PIC)
- Looking for Water injection + Boost control
- devilsown correct nozzle size ?
- Propper nozzle size and location
- Aquamist HFS-3 (with summer) vs. HFS-6
- looking for suggestions and pics
- GT4088r water/meth injector size
- My daily driven AI build/dyno thread
- Recommended AIs in 2011
- Another option for pump location on an FD
- Oil change frequency with WI
- New guy to WI seriously considering it for my build
- Direct Port Nozzle Location
- New to A/I - a few questions
- Help sizing staged post turbo water injection setup please?
- Dudemaaanownsanrx7 Water Inj Pressure Sources
- Aquamist flow gauge not lighting up all the way anymore
- Pre turbo nozzle location ? in my cold air intake
- HFS-6 on a RX 7 FD3S (rotary)
- do i need water only or 50/50 meth for my goal...?
- HFS-6 on a RX 7 FD3S (rotary)
- AI question
- Adding timing with aux injection
- my third AI system
- inject in vacuum AND boost?
- Looking for AI
- what kind of tank are you running in your fd?
- Air atomizing nozzle???
- Aquamist HFS-6 ?? HELP
- Potential problems using wiper fluid
- Cleaning your nozzle
- Water injection... Does this make since?
- Alcohol / Meth Injection Tank Location (FD3S)?
- Looking at two kits
- Since AI cleans everything nicely, does it affect OMP/Premix lubrication?
- how to clean O2 sensor
- My pre turbo WI
- Boost Safe ouput wiring instructions
- Max boost and expected HP with water injection
- Aquamist HFS-3 Install
- FJO wideband display wiring
- Nozzle sizing
- GM's OEM preturbo methanol injection system
- water injection on my FC, need opinions
- Ignition source
- Aquamist 2d Install ?
- Nozzle Location and Size
- Replacement for FJO Injector Driver
- which system/jeting will suit my needs?
- pre turbo vacuum source
- What Are The Basics For Water Only Tuning
- Air Atomization Nozzle.... Completely mechanical activation.
- Basic water injection info
- E85 conversion??????
- Aquamist HFS 3 impressions and a wordy gushing recount of the Edmonton Indy
- meth injection on stock top mount
- Pre Turbo WI vs Post IC WI Dyno Test Results!
- Aquamist's new release of HFS-4 system...
- Trying to plan a WI setup
- Nozzle Flow Calculator
- Big Bore Injector
- Need advice? Use exiting HFS-5 with Summer or Upgrade?
- Flow Monitoring and Failsafes
- Switching from 100% meth to washer fluid
- Place to buy Methanol in Massachusetts
- FC tank install locations?
- Finally getting started on my WI setup
- Need info on VARICOOL System.
- JB Welding an AI bung
- How often should AI nozzles be cleaned?(which nozzle should I use?)
- What PSI should I start to spray?