Aquamist 2d, FIA2 and injector duty
#1
Aquamist 2d, FIA2 and injector duty
I might be able to pick up an Aquamist 2d system for a relatively decent price but am not sure how useful it will be on an FD. I did a lot of searching here but could not determine if it is possible for the FiA2 injection amplifier in this kit to determine an overall injector duty cycle. As far as I can tell, it can not. If not, is there another option to drive the injector in this kit?
#2
Junior Member
iTrader: (10)
Join Date: Apr 2002
Location: bay area
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
I'm in a similar situation and my understanding is:
The FIA2 can use the secondaries only (or primaries). Richard at AQ has also made a "Summer" for rotary engines that can run off of both the primary and secondary. I have been in contact with Richard and he says the Summer can be ordered directly from him for $150 + $18 shipping.
Check out post #55.
https://www.rx7club.com/showthread.p...st#post7500825
The FIA2 can use the secondaries only (or primaries). Richard at AQ has also made a "Summer" for rotary engines that can run off of both the primary and secondary. I have been in contact with Richard and he says the Summer can be ordered directly from him for $150 + $18 shipping.
Check out post #55.
https://www.rx7club.com/showthread.p...st#post7500825
#3
Thanks for the link. The sentence
is interesting. I'll need to do some calculations, but it is not clear to me that the extra 13% would offer a significant tuning advantage.
The reason for the summer was to extend the HFS's operating range form 12%-100%. compared to 25% to 100% (reading the secondary only)
Thread
Thread Starter
Forum
Replies
Last Post
HalifaxFD
Canadian Forum
126
05-09-16 07:06 PM