need help stting up an w/a injection kit
need help stting up an w/a injection kit
well as the title states, im kind of a noob when it comes to this stuff but so far all i know is a i need a trunk located tank and a progressive kit so i can hook it up to my aem, and sorry not goin on the rx7...this is for the m3
i know this is kind of vague but hopefully (purpose of this) by the end ill narrow down my options/needs and i can put something together
thanks in advance
marcelo
i know this is kind of vague but hopefully (purpose of this) by the end ill narrow down my options/needs and i can put something together
thanks in advance
marcelo
Marcello,
I am unsure of what exact questions you have, so I will point you in direction of what products we have. If you have questions about how these products work feel free to PM or call or post here.
We do sell a trunkmount progressive kit:

The vari-cool controller can accept multiple inputs. where most controllers will take a simple 0-5V or boost line, ours can do both. If your AEM puts out a 12V, 5V or 0-5V you can create a map to use with our vari-cool using Vari-Cool in 2D mode Simply means you have 2 inputs and you can make the system flow based on input of both.
So the AEM can be the activation TRIGGER or it can be the primary input.
I know my answers may or may not address your question completely, so if you want more input from my company feel free to be more specific in your question and I can answer.
David
I am unsure of what exact questions you have, so I will point you in direction of what products we have. If you have questions about how these products work feel free to PM or call or post here.
We do sell a trunkmount progressive kit:

The vari-cool controller can accept multiple inputs. where most controllers will take a simple 0-5V or boost line, ours can do both. If your AEM puts out a 12V, 5V or 0-5V you can create a map to use with our vari-cool using Vari-Cool in 2D mode Simply means you have 2 inputs and you can make the system flow based on input of both.
So the AEM can be the activation TRIGGER or it can be the primary input.
I know my answers may or may not address your question completely, so if you want more input from my company feel free to be more specific in your question and I can answer.
David
well its hard to get to specific with my questions but maybe narrowing it down by posting what my goal/hope for this system
for the most part im only guna run pump gas on his car, and on the pt67 dbb on my application i can boost up to the high teens before ill need to get some higher octane fuel....i pretty much want to run a 100% meth mixture into the trunk mounted tank that my aem can activate when the psi is bumped up via an ebc, essentially the same map with or without the meth but when it hits a certain psi the progressive kit kicks in...like i said im still learning but hopefully ill learn about all the features i need or dont need...and im looking to spend about 500 bucks
so far im looking into the coolingmist, great customer service or alkycontrol....i like alll the safety features it comes with....
for the most part im only guna run pump gas on his car, and on the pt67 dbb on my application i can boost up to the high teens before ill need to get some higher octane fuel....i pretty much want to run a 100% meth mixture into the trunk mounted tank that my aem can activate when the psi is bumped up via an ebc, essentially the same map with or without the meth but when it hits a certain psi the progressive kit kicks in...like i said im still learning but hopefully ill learn about all the features i need or dont need...and im looking to spend about 500 bucks
so far im looking into the coolingmist, great customer service or alkycontrol....i like alll the safety features it comes with....
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
SakeBomb Garage
Group Buy & Product Dev. FD RX-7
8
Oct 9, 2015 10:05 PM



