I am looking for a bulk head fitting that I can install into my windsheild water jug. I would like to install the AI pump line from this tank but cannot find a suitable non aluminum fitting for this.

Any ideas on how to connect to this tank.

(I am using a 50/50 mix so it's not a flamable issue. Just corrosive)

example http://store.summitracing.com/partde...5&autoview=sku

Another note is that I think the hose kit which I have not received yet may just clamp over it and not be a AN fitting.

Thanks,
Ian

 

there is a stainless bulkhead fitting I believe an AN 5 or AN 6 at my local earls retailer.

For the life of me I can't find it in there catalog online.

You can use an anodized aluminum fitting. It will take years if ever for the anodized coating to wear off.

 

http://store.summitracing.com/partde...5&autoview=sku

There's no picture, but this should be like what snowperformance offers, its a stainless bulkhead fitting with 1/4" push-loc connections that you just slide the 1/4" nylon tube into.

In fact, if memory serves my kit might have come with one for using your stock jugs - I'll check and if there's one in there I'll PM you and I can mail it up to you.

 

Nice. That would be awesome. Hopefully I can mount that lower then the low switch that activates the map change.............

Ian