Fuel cell/tank breather vent (for alcohol users)
#1
BDC Motorsports
Thread Starter
Fuel cell/tank breather vent (for alcohol users)
This is for the alcohol users out there that are either currently building or are hoping to build an alcohol-based system. This is specifically for the (filtered) breather vent that will go outside of the vehicle.
http://www.mcmaster.com - Page 315, 1/3 the way down, Type 316 Stainless Steel Breather/Vent Filters
Picture of the 1/8" and 1/4"NPT steel/bronze vents in the flesh:
http://bdc.cyberosity.com/v/ProjectC...geViewsIndex=1
They're anywhere from $5 to $8. This is necessary for keeping the fuel cell free of junk by way of the breather. The stainless steel is for inhibiting corrosivity issues with alcohol (if they exist). They come with a bronze filter element.
Here's how I ran and mounted mine in my Turbo II:
http://bdc.cyberosity.com/v/ProjectC...rol/?g2_page=4
B
http://www.mcmaster.com - Page 315, 1/3 the way down, Type 316 Stainless Steel Breather/Vent Filters
Picture of the 1/8" and 1/4"NPT steel/bronze vents in the flesh:
http://bdc.cyberosity.com/v/ProjectC...geViewsIndex=1
They're anywhere from $5 to $8. This is necessary for keeping the fuel cell free of junk by way of the breather. The stainless steel is for inhibiting corrosivity issues with alcohol (if they exist). They come with a bronze filter element.
Here's how I ran and mounted mine in my Turbo II:
http://bdc.cyberosity.com/v/ProjectC...rol/?g2_page=4
B
Thread
Thread Starter
Forum
Replies
Last Post
Captain_Panic
Alternative Fuels
9
09-16-15 02:06 PM