Other injection fluids
Thread Starter
Full Member
Joined: Nov 2003
Posts: 79
Likes: 0
From: Essex, UK
Other injection fluids
Evening all,
Just wondered if anyone has any experience of anything other than methanol and water?
Heard ethanol come up a few times, also acetone, any other miscible fluids people have tried? or experiences with the previously mentioned?
Any views, opinions, experiences welcome, just a thread for discussion.
I wondered if anyone had needed to use a mixture of fluids (other than the meth/water mix) to overcome any saturation issues, or to generally improve the cooling effect, Daltons law style
Just wondered if anyone has any experience of anything other than methanol and water?
Heard ethanol come up a few times, also acetone, any other miscible fluids people have tried? or experiences with the previously mentioned?
Any views, opinions, experiences welcome, just a thread for discussion.
I wondered if anyone had needed to use a mixture of fluids (other than the meth/water mix) to overcome any saturation issues, or to generally improve the cooling effect, Daltons law style
Junior Member
Joined: Oct 2006
Posts: 26
Likes: 0
From: Oklahoma City
WE have played with quite alot of other chemicals. Toulene xylene, torco, Non of them worked like meth.
We even usta have a propane kit. Propane is just a pita because the room for the tank.
Also with Ethanol there are differnt grades E85 which you will find at the pump is no where near the cooling capability to E100 But is not as easly found as Meth. In our experance Meth will work cool better, has a higher octane.
We even usta have a propane kit. Propane is just a pita because the room for the tank.
Also with Ethanol there are differnt grades E85 which you will find at the pump is no where near the cooling capability to E100 But is not as easly found as Meth. In our experance Meth will work cool better, has a higher octane.
Thread
Thread Starter
Forum
Replies
Last Post
LongDuck
1st Generation Specific (1979-1985)
12
Oct 7, 2015 08:12 PM
