Old guys with 12As club meeting
I must have been reading your mind Alex, see my other post. I will add it to the OGTA repository, my only back up now is from an 83 and I don't think it's the same as the 84/85 tanks.
I would rather it go to a local OGTA member

Ray, If you want you can come and pick it up in Powder Springs or i can bring it to the next OGTA meet for you.
Two wheels down, and two to go. I just need to wet sand, apply the color, and clear them. I hope to finish them tomorrow.
Color is Metallic Caramel.

Joined: Oct 2003
Posts: 3,438
Likes: 6
From: Outskirts of Road Atlanta
Haters gonna hate.
http://www.google.com/search?q=atomi...w=1600&bih=748
Some days I'm close to chickening out and going back to blurple instead. Screw it, the kids can repaint it when I'm dead if they want.
http://www.google.com/search?q=atomi...w=1600&bih=748
Some days I'm close to chickening out and going back to blurple instead. Screw it, the kids can repaint it when I'm dead if they want.
I believe I've made that point several times myself, I love that color. Can't wait to see it!
Hopefully Dave will have the Phoenix painted to match by then and can make the trip down too. Before it gets too cold this time Dave!
Hopefully Dave will have the Phoenix painted to match by then and can make the trip down too. Before it gets too cold this time Dave!
I did not fall off the face of the earth. I took some vacation last week and I am just now catching up. Hope to see everyone at the July OGTA, but there is a chance I may need to go to something with Michelle that evening. Sounds like July is shaping up to be a good meet.
Mine( FB) will not be painted until after the REPU for sure. The FD is in primerw/guide coat. Still battling a seam that keeps splitting. Nothing of mine is getting painted until the REPU is done is how I see it.
That color is one of the most popular colors being used in the industry right now. ( And variations of it)
That color is one of the most popular colors being used in the industry right now. ( And variations of it)
What'd ya' hit Holly? Got pics?
I'm just redoing all the brakes on the Silver One, I got all new stuff (front & back rotors, front & back pads, front wheel bearings) from Rock Auto for disgustingly low prices (see below).
Quick shipping and great service (they had to ship the outer wheel bearings three times, anybody need a pair for an early '50's Alfa Romeo?)
But I'd still be interested in what the Hawk pad upgrade would cost, got MazMart prices for an 85 GSL?
Figure it's a good time to do a complete brake bleed and install my stainless steel brake lines while I'm at it.
Might even repaint the calipers. What'd ya think guys, Hot Pink?
Should be ready to go for the July meet.
BECK/ARNLEY 0802163 Front Rotor
Wholesaler Closeout - 30 Day Warranty $ 14.92 2 $ 29.84
BECK/ARNLEY 0802011 Rear Rotor
Wholesaler Closeout - 30 Day Warranty $ 9.37 2 $ 18.74
AXXIS Deluxe Plus organic 0880308D Brake Pads (front)
Wholesaler Closeout - 30 Day Warranty $ 9.62
BECK/ARNLEY 0842010 Brake Pad Shim Kit (front)
Wholesaler Closeout -- 30 Day Warranty $ 3.01
AXXIS Deluxe Plus 0881223D Brake Pads (rear)
Wholesaler Closeout -- 30 Day Warranty $ 10.05
NATIONAL A32 Wheel Bearing - Inner
Wholesaler Closeout - 30 Day Warranty $ 7.37 2 $ 14.74
NATIONAL 32204 Wheel Bearing - Outer $ 14.80 2 $ 29.60
I'm just redoing all the brakes on the Silver One, I got all new stuff (front & back rotors, front & back pads, front wheel bearings) from Rock Auto for disgustingly low prices (see below).
Quick shipping and great service (they had to ship the outer wheel bearings three times, anybody need a pair for an early '50's Alfa Romeo?)
But I'd still be interested in what the Hawk pad upgrade would cost, got MazMart prices for an 85 GSL?
Figure it's a good time to do a complete brake bleed and install my stainless steel brake lines while I'm at it.
Might even repaint the calipers. What'd ya think guys, Hot Pink?
Should be ready to go for the July meet.
BECK/ARNLEY 0802163 Front Rotor
Wholesaler Closeout - 30 Day Warranty $ 14.92 2 $ 29.84
BECK/ARNLEY 0802011 Rear Rotor
Wholesaler Closeout - 30 Day Warranty $ 9.37 2 $ 18.74
AXXIS Deluxe Plus organic 0880308D Brake Pads (front)
Wholesaler Closeout - 30 Day Warranty $ 9.62
BECK/ARNLEY 0842010 Brake Pad Shim Kit (front)
Wholesaler Closeout -- 30 Day Warranty $ 3.01
AXXIS Deluxe Plus 0881223D Brake Pads (rear)
Wholesaler Closeout -- 30 Day Warranty $ 10.05
NATIONAL A32 Wheel Bearing - Inner
Wholesaler Closeout - 30 Day Warranty $ 7.37 2 $ 14.74
NATIONAL 32204 Wheel Bearing - Outer $ 14.80 2 $ 29.60
AXXIS Deluxe Plus organic 0880308D Brake Pads (front)
Wholesaler Closeout - 30 Day Warranty $ 9.62
Wholesaler Closeout - 30 Day Warranty $ 9.62
I may have convinced my younger brother to get an FC instead of a Mustang. We'll see how everything goes, I'll know for sure if he's getting it or not tomorrow.
Charles has a Black 90 FC roller (missing motor and trans) with good interior. Could get it cheap with TN title.
Joined: Oct 2003
Posts: 3,438
Likes: 6
From: Outskirts of Road Atlanta
Mine( FB) will not be painted until after the REPU for sure. The FD is in primerw/guide coat. Still battling a seam that keeps splitting. Nothing of mine is getting painted until the REPU is done is how I see it.
That color is one of the most popular colors being used in the industry right now. ( And variations of it)
That color is one of the most popular colors being used in the industry right now. ( And variations of it)
What'd ya' hit Holly? Got pics?
I'm just redoing all the brakes on the Silver One, I got all new stuff (front & back rotors, front & back pads, front wheel bearings) from Rock Auto for disgustingly low prices (see below).
Quick shipping and great service (they had to ship the outer wheel bearings three times, anybody need a pair for an early '50's Alfa Romeo?)
But I'd still be interested in what the Hawk pad upgrade would cost, got MazMart prices for an 85 GSL?
Figure it's a good time to do a complete brake bleed and install my stainless steel brake lines while I'm at it.
Might even repaint the calipers. What'd ya think guys, Hot Pink?
I'm just redoing all the brakes on the Silver One, I got all new stuff (front & back rotors, front & back pads, front wheel bearings) from Rock Auto for disgustingly low prices (see below).
Quick shipping and great service (they had to ship the outer wheel bearings three times, anybody need a pair for an early '50's Alfa Romeo?)
But I'd still be interested in what the Hawk pad upgrade would cost, got MazMart prices for an 85 GSL?
Figure it's a good time to do a complete brake bleed and install my stainless steel brake lines while I'm at it.
Might even repaint the calipers. What'd ya think guys, Hot Pink?
Feel free to call Paul at Mazmart 770-455-4848 for Hawk Brake Pad info
Redline Oil is $9.75 qt. (5w40 & 10w40)
Rediline Gear Oil $12.75 qt. (MT90 & 75w90)
Sad, the Gray Goblin has a sore lip. We can lay a little OGTA love on it at the July meeting Holly, maybe it will go away.
Here's the deal on the pads. The complete set of organics, front and back, from Rock Auto was about $20.
From what I'm seeing the Hawk equivalent would be about $140 or even more if you pay stock prices.
Good brakes are great, but do I really need to stop that fast? For the $120 bucks difference, I'm willing to anticipate the traffic a little.
Am I missing something?
The red line oil is looking good, do they have 50 gal drum discounts?
Crit and Dave, can't wait to see the REPU, hope you went with the copper tone
Here's the deal on the pads. The complete set of organics, front and back, from Rock Auto was about $20.
From what I'm seeing the Hawk equivalent would be about $140 or even more if you pay stock prices.
Good brakes are great, but do I really need to stop that fast? For the $120 bucks difference, I'm willing to anticipate the traffic a little.
Am I missing something?
The red line oil is looking good, do they have 50 gal drum discounts?
Crit and Dave, can't wait to see the REPU, hope you went with the copper tone
Good brakes are great, but do I really need to stop that fast? For the $120 bucks difference, I'm willing to anticipate the traffic a little.
Am I missing something?
Am I missing something?
I'd be happy if he got an FC- I'd finally have someone to unload all these parts on! haha





