Mods are: Rx7 Store Stage 2 Street Port, GT35R Turbo kit, Extreme Fuel System, Power FC, Greddy FMIC, HKS Twin Power, Full Exhaust. 15.5 Psi.

440 RWHP

http://www.rx7store.net/photos/Dyno5-2.jpg

 

Wow! That's a nice chart for so few mods.

 

heres a new dyno readout of my car on the weekend

393kw at wheels or 527 hp .......on low boost

http://i73.photobucket.com/albums/i2...5082007310.jpg

 

I like how it says rotors, not pistons (Rotors: 2)

 

https://www.rx7club.com/rx-7-store-210/halfbridge-t-78-dyno-684307/

 

wow, nice torque curve

 

i was curious as to what my torque figure would be in the measurement you use

806 nm of torque = 594 ftlbs not bad lol i think it will go over 1000 nm

 

mods are RX7 Store Street Port, Power FC, Extreme fuel system, Full exhaust, Greddy Front Mount Intercooler. We were having issues with the boost controller.

http://www.rx7store.net/photos/Dyno8-2.jpg


Jason

 

MP? You achieve peak power lower than I do, mine is at 7200

 

MP as in Midpipe? Yes. We were having issues with it bleeding off boost up top. We typically see peak power at 7000-7200 RPM.

Jason

 

yeah midpipe. hm I see, I have h/f cat and stock ports but 14psi, so 322 @ 7200 with 277tq, EVC VI.

 

Dyno graph to come. Saturday I dynoed @ Defined Autoworks.

They sport a dyna pak, which most of you may know, they typically read lower that dynojets. Well that theory held true. Villision 1revin7 made 463 on RX7store's dynojet. On defined's dyna pak it made 459. Granted it is only 4 hp, but it is just to show you how "true" the dyno was reading.

My mods include,

Ported twins/ported manifold(stock ht-12's)
Full exhaust
intake
9.5lbs flywheel
enfini y-pipe/greddy elbow
greddy v-spec 2 row intercooler.

Car on 10 lbs made 321 whp and 279 tq. MY EBC took a **** on me, and I was running on spring rate. It would creep to 10.5.

Jackson

 

Here you go bitches!

http://img337.imageshack.us/img337/5...sitwinspr3.jpg

Jackson

 

Edit-delete

Jackson

 

You running non sequential?

Jason

 

Yes with ported mainifold.

Jackson

 

stock ECU? what were the AFR's?

 

powerfc, 11.0:1

Jackson

 

did you do any tuning or was that just off the base map?

 

To my knowledge, that is with my tuning. However, I had my car @ the 7store earlier this year, and rumor has it, they loaded one of their maps on there. Not 100% sure though. I have had a wideband on it several time to ensure that whoevers map is on it, is good.

Jackson

 

Here is a vid of my car on the dyno, I am the second FD to dyno(i.e. around the 3 minute mark.

http://www.youtube.com/watch?v=_ooVpUifNlQ

Jackson

 

14-15 psi stock port. Now running 19psi.

 

what turbo?

 

Precision Turbo 67GTQ

 

334rwhp 277lbs tq at 14psi
afr - 11.4
stock port
stock turbos
3" full exhaust
1680cc/850cc
sx reg
supra tt fp
hks intake
PFC + datalogit
greddy profec b spec 2
non seq

http://i27.photobucket.com/albums/c1...Jakenonseq.jpg