Old guys with 12As club meeting
had to do that when i put a gsl diff in the 808 i had. the bolt holes in the shaft i was using didn't match the holes in the flange on the diff. worked great.
Rotary Enthusiast
Joined: Dec 2001
Posts: 918
Likes: 0
From: Atlanta
Boinger help?
This is for a guy here at work. Pontiac Grand Slam I think 2.4 liter inline 4.
We were out for work one day, finished up, went to come back, and when he started his car, it immediately died. He tried to start it again, made some clanking noises, and then apparently the motor temporarily locked up. He got it towed home.
He has been trying to diagnose the problems now. He went to look at the timing chain tensioner (been replaced 3 or 4 times already, 150k miles), and apparently the chain was stretched pretty good. So he is fairly certain the chain jumped a few teeth.
He's the cheapest person in the world, so he won't pull the head for fear he might have to replace the gasket. So they put the new chain in, cranked it, and had a nice boom with smoke/fire out of the bottom end.
That's where it's at now. He claims smoke out of the bottom end, not the exhaust manifold or anything.
Any thoughts about what could be going on at this point? Where he should check next, possibly one of them cash for junk cars places?
This is the problem with valves.
This is for a guy here at work. Pontiac Grand Slam I think 2.4 liter inline 4.
We were out for work one day, finished up, went to come back, and when he started his car, it immediately died. He tried to start it again, made some clanking noises, and then apparently the motor temporarily locked up. He got it towed home.
He has been trying to diagnose the problems now. He went to look at the timing chain tensioner (been replaced 3 or 4 times already, 150k miles), and apparently the chain was stretched pretty good. So he is fairly certain the chain jumped a few teeth.
He's the cheapest person in the world, so he won't pull the head for fear he might have to replace the gasket. So they put the new chain in, cranked it, and had a nice boom with smoke/fire out of the bottom end.
That's where it's at now. He claims smoke out of the bottom end, not the exhaust manifold or anything.
Any thoughts about what could be going on at this point? Where he should check next, possibly one of them cash for junk cars places?
This is the problem with valves.
Boinger help?
This is for a guy here at work. Pontiac Grand Slam I think 2.4 liter inline 4.
We were out for work one day, finished up, went to come back, and when he started his car, it immediately died. He tried to start it again, made some clanking noises, and then apparently the motor temporarily locked up. He got it towed home.
He has been trying to diagnose the problems now. He went to look at the timing chain tensioner (been replaced 3 or 4 times already, 150k miles), and apparently the chain was stretched pretty good. So he is fairly certain the chain jumped a few teeth.
He's the cheapest person in the world, so he won't pull the head for fear he might have to replace the gasket. So they put the new chain in, cranked it, and had a nice boom with smoke/fire out of the bottom end.
That's where it's at now. He claims smoke out of the bottom end, not the exhaust manifold or anything.
Any thoughts about what could be going on at this point? Where he should check next, possibly one of them cash for junk cars places?
This is the problem with valves.
This is for a guy here at work. Pontiac Grand Slam I think 2.4 liter inline 4.
We were out for work one day, finished up, went to come back, and when he started his car, it immediately died. He tried to start it again, made some clanking noises, and then apparently the motor temporarily locked up. He got it towed home.
He has been trying to diagnose the problems now. He went to look at the timing chain tensioner (been replaced 3 or 4 times already, 150k miles), and apparently the chain was stretched pretty good. So he is fairly certain the chain jumped a few teeth.
He's the cheapest person in the world, so he won't pull the head for fear he might have to replace the gasket. So they put the new chain in, cranked it, and had a nice boom with smoke/fire out of the bottom end.
That's where it's at now. He claims smoke out of the bottom end, not the exhaust manifold or anything.
Any thoughts about what could be going on at this point? Where he should check next, possibly one of them cash for junk cars places?
This is the problem with valves.
I lost you at............inline 4.....Then again at........timing chain........And what are these valves of which you speak?
-billy
Don't put the octamom in the capitalist category. She is clearly a socialist.
But, I am with you on investing in RX-7s. At least the 1st gens are holding their value. That's better than the retirement savings.
Hey, Ray what would you charge me for Michelle and I to live in goat house when I retire?
And since I'm procrastinating some homework I played in paint some more. 
Point 'A' is just the intersection of 400 and 60, and there's a home depot there that's hard to miss. Maybe we could meet there and snap a few pictures. There's also a gas station there on the other side of the street so we can fill up and what not. Then we could grab some food in Dahlonega if some people haven't eaten, and drive by the college I'm going to
And there's some small things there in Turner's Corner too for a pit stop too.I'm excited...
Goat house is taken, we are moving in when the goats move out, renting out the house. And actually Mike, I was putting octamom's and capitalists in the same category: Parasites. People who make money on money are the lowest of the low.
And if we were truly a functioning socialist society (like China) we wouldn't have any octamom's, they'd be in jail (along with the capitalists).
But yeah I'm just pissed because the Madoff's and the AIG execs made off with $35,000 (30%) of my cautiously invested retirement funds (TIAA-CREFF's managers, not me). So much for trusting capitalists, I'm taking charge of what's left and investing it in 84/85 GSLs.
Anyway, enough pushing this boulder uphill, back to the weekend jaunt. The weather looks OK, but not great, probably hovering in the '50's but with some sun, at least:
http://www.weather.com/weather/weeke...nav_undeclared
Looks like we have some attrition, Chris, Colin, Crit, others? And would you guys be interested if we did this on another date, if a good alternative could be found, keeping in mind that rescheduling usually causes more problems than it solves?
And Brett, this looks like a great loop!
And if we were truly a functioning socialist society (like China) we wouldn't have any octamom's, they'd be in jail (along with the capitalists).
But yeah I'm just pissed because the Madoff's and the AIG execs made off with $35,000 (30%) of my cautiously invested retirement funds (TIAA-CREFF's managers, not me). So much for trusting capitalists, I'm taking charge of what's left and investing it in 84/85 GSLs.
Anyway, enough pushing this boulder uphill, back to the weekend jaunt. The weather looks OK, but not great, probably hovering in the '50's but with some sun, at least:
http://www.weather.com/weather/weeke...nav_undeclared
Looks like we have some attrition, Chris, Colin, Crit, others? And would you guys be interested if we did this on another date, if a good alternative could be found, keeping in mind that rescheduling usually causes more problems than it solves?
And Brett, this looks like a great loop!
I'll probably run most of it with my heater on to keep the temps down 
And I bought some new tires that should be here and could get put on before Saturday, but I think my current rears can take some more before I should change them out. I bought some 225/50/15 Falken Ziex 512's for $$68/ tire. They're a big 4 cm wider than stock! hah
Kevin, sorry to hear about Jennifer's dad. You are doing the right thing being there for her.
No weekend will work for everyone. We should go ahead an do the ride this Saturday. If there is enough interest an other ride will get scheduled.
No weekend will work for everyone. We should go ahead an do the ride this Saturday. If there is enough interest an other ride will get scheduled.
Rotary Freak
Joined: May 2002
Posts: 2,515
Likes: 5
From: Atlanta, GA
Anyone of you guys good with refig repair, or know a good appliance repair person? My frig seems to be stuck in defrost mode. I opened my freezer this morning to water leaking out the icemaker. Come to think of it, it had been making funny noise for about a week, but I thought ice got stuck under the icemaker.
And, anybody want a passenger for the mountain ride? That's if I get the frig repaired.
Holly
And, anybody want a passenger for the mountain ride? That's if I get the frig repaired.
Holly
.