Tegheim - Home made 4 Rotor Wolvo project
#827
Senior Member
iTrader: (1)
Wicked! I'm curious how much those rotors end up weighing, my modified s4 n/a rotors are 4250 grams, that includes the rotor gear but does not include the rotor bearing or any seals. Did you see the billet rotors hayward rotary in the uk made? They don't have the bolted on side plates as seen on the mazdatrix billet rotors, it's a 1-piece design. Anyway carry on!
#829
Senior Member
Thread Starter
Foudn them. Have seen them before also
I always wondered how the milled the side-seal-contour. Its about 0.7mm wide, and 3.8mm deep!!
https://www.rx7club.com/rotary-car-p...nning-1005066/
I always wondered how the milled the side-seal-contour. Its about 0.7mm wide, and 3.8mm deep!!
https://www.rx7club.com/rotary-car-p...nning-1005066/
#831
Junior Member
Join Date: Jan 2011
Location: Lithuania
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Foudn them. Have seen them before also
I always wondered how the milled the side-seal-contour. Its about 0.7mm wide, and 3.8mm deep!!
https://www.rx7club.com/rotary-car-p...nning-1005066/
I always wondered how the milled the side-seal-contour. Its about 0.7mm wide, and 3.8mm deep!!
https://www.rx7club.com/rotary-car-p...nning-1005066/
#835
Senior Member
Thread Starter
I know there is small endmills :-)
But as you say, you need a million rpm and alot of time :-)
Also, the endmills I've looked at doesnt have the lenght for this gap.
Thanks!
But as you say, you need a million rpm and alot of time :-)
Also, the endmills I've looked at doesnt have the lenght for this gap.
Thanks!
#836
Senior Member
Thread Starter
I bought a bunch of new rotors. How do I comfirm that they are 9.7:1-compression?
I have weight them, but all the newer rotors have the same weight. The 28cc in the comb-chamber are kind of tricky to check, or?
I have weight them, but all the newer rotors have the same weight. The 28cc in the comb-chamber are kind of tricky to check, or?
#840
Senior Member
Thread Starter
#843
Senior Member
Thread Starter
#844
Senior Member
Wiiii update ow no no update
Can you add the following link to your website: http://translate.google.be/translate...erformance.com
Can you add the following link to your website: http://translate.google.be/translate...erformance.com
#846
Senior Member
I say follow this: https://translate.google.com/manager/website/ and put it where you want
#848
500+hp club
iTrader: (26)
I have them all. Maybe i will make some molds. Or any other ideas anyone has..
#849
Eats, Sleeps, Dreams Rotary
iTrader: (1)
C'mon guys! How about a little search- here's root weight and compression chart on Mazdatrix web-
http://www.mazdatrix.com/faq/rotorwgt.htm
As you notice- the 9.7 rotors have a 26cc combustion chamber/bathtub - lower compression rotors will have larger bathtubs than this. Not rocket science
http://www.mazdatrix.com/faq/rotorwgt.htm
As you notice- the 9.7 rotors have a 26cc combustion chamber/bathtub - lower compression rotors will have larger bathtubs than this. Not rocket science
#850
Senior Member
How you measure it is simple, poor distilled water or other fluid on a face :p and the put that in a measure beaker.
@ultimatejay: you can go 28cc but with a less deeper cut. But as you states, its just math.
@ultimatejay: you can go 28cc but with a less deeper cut. But as you states, its just math.