Steve Kan Tuning in the St.Louis and Surrounding area. **2nd Round**
For those that might have been following my thread above, I have an update! The car is fixed. A rubber cap blew off the intercooler causing a giant vacuum leak. So, I redid all of the vacuum caps today and put screw/band clamps on them all. Also put my new TPS back on today and adjusted her... she's running like a champ. So, I won't have to cancel my St. Louis trip after all. haha, yay!
Originally Posted by mr0pistons
Sounds good, I don't think they will let me in, I don't look much over 17 even though I'm almost 20.
I wonder what my friend will think about this.. I didn't tell her about this part of the trip. LOL
Originally Posted by JoshRX7
For those that might have been following my thread above, I have an update! The car is fixed. A rubber cap blew off the intercooler causing a giant vacuum leak. So, I redid all of the vacuum caps today and put screw/band clamps on them all. Also put my new TPS back on today and adjusted her... she's running like a champ. So, I won't have to cancel my St. Louis trip after all. haha, yay!
mr0pistons... but you look so old smoking the bud in your picture...
JuiceH... i've been prepping my girlfriend for weeks now, just for the fact that we'll be in the same building with a strip club... haha I could just see the look on her face rolling up and not shared that piece of information. I can tell this car outting is going to be a classic (even though I won't be there for all of it).
JuiceH... i've been prepping my girlfriend for weeks now, just for the fact that we'll be in the same building with a strip club... haha I could just see the look on her face rolling up and not shared that piece of information. I can tell this car outting is going to be a classic (even though I won't be there for all of it).
Originally Posted by mr0pistons
Sounds good, I don't think they will let me in, I don't look much over 17 even though I'm almost 20.
And no Girly With me just one of my friends driving me up there so i can pick up my car.
Originally Posted by Bill91T
What are the odd's that 2 MR2's show up to get tuned at an RX7 event? In st. louis even.....there must be like what 5 MR2's total in the lou 

No one under 21 will be able to get into Penthouse unless you have to have an excellent ID. They ID every person who walks through the door and the bouncers will throw you on your *** is oyu give him any ****.
I'm sure we'll be going to other bars anyways beforehand. Who want to go to the strip clubs@ 7 o'clock?
I'll be bringing along my state ID in case one of you little ******* looks like me.
And Eric, you better get me a VIP pass or else........................
I'm sure we'll be going to other bars anyways beforehand. Who want to go to the strip clubs@ 7 o'clock?
I'll be bringing along my state ID in case one of you little ******* looks like me.
And Eric, you better get me a VIP pass or else........................
Originally Posted by OMGWTFDRIFTGUY
Who want to go to the strip clubs@ 7 o'clock?

Dude, I had an ex sycho girlfriend call me last night........... I think I've got a stalker
Think we can get 200 posts in this thread before friday? (no spam but usefull posts).....like hey Eric hows my Car starting to look? think it'll be a force to rekon with, with what its got going for it thus far? (not a race car)
Originally Posted by desmond
can spectators get a pass?
Originally Posted by KaoticFdR1
Think we can get 200 posts in this thread before friday? (no spam but usefull posts).....like hey Eric hows my Car starting to look? think it'll be a force to rekon with, with what its got going for it thus far? (not a race car)
Originally Posted by KaoticFdR1
I'm bringin more business Ron's way....my g/fs big brother has a 94 BB touring....he's getting rons large street port. And probably some other things in the future
Originally Posted by LUPE
The owner of the Dyno is buying everyone who participates in a dyno a pass. If you aren't paying for dyno time then you won't get a free pass.
are there any under 21 people that want to give theirs up??
TIM, sorry I forgot to give you a call last night. I will give you a call tomorrow.
Eric - I am definately in. I got all of my issues with the TPS figured out, and the coolant hose that I need will be in on Wednesday. I can't wait to see your beast and meet everyone Tim always talks about.
Bill Simpson - Also looking forward to seeing your car and meeting you. I don't know if you recall, but I chated with you via email about a year and a half ago reguarding your setup, when I was looking into upgrades for my car. Are you still running a TD06? What is your current setup. You can email me if you want, tjhead_at_charter.net, I don't really want to polute the RX7 forum with MR2 jargon.
Looking forward to meeting everyone that will be there. I am not scheduled until Sunday, but I will probably be there until about 3:00 p.m. on Saturday.
T.J.
Eric - I am definately in. I got all of my issues with the TPS figured out, and the coolant hose that I need will be in on Wednesday. I can't wait to see your beast and meet everyone Tim always talks about.
Bill Simpson - Also looking forward to seeing your car and meeting you. I don't know if you recall, but I chated with you via email about a year and a half ago reguarding your setup, when I was looking into upgrades for my car. Are you still running a TD06? What is your current setup. You can email me if you want, tjhead_at_charter.net, I don't really want to polute the RX7 forum with MR2 jargon.
Looking forward to meeting everyone that will be there. I am not scheduled until Sunday, but I will probably be there until about 3:00 p.m. on Saturday.
T.J.
Originally Posted by TJ_'93MR2T
TIM, sorry I forgot to give you a call last night. I will give you a call tomorrow.
Eric - I am definately in. I got all of my issues with the TPS figured out, and the coolant hose that I need will be in on Wednesday. I can't wait to see your beast and meet everyone Tim always talks about.
Bill Simpson - Also looking forward to seeing your car and meeting you. I don't know if you recall, but I chated with you via email about a year and a half ago reguarding your setup, when I was looking into upgrades for my car. Are you still running a TD06? What is your current setup. You can email me if you want, tjhead_at_charter.net, I don't really want to polute the RX7 forum with MR2 jargon.
Looking forward to meeting everyone that will be there. I am not scheduled until Sunday, but I will probably be there until about 3:00 p.m. on Saturday.
T.J.
Eric - I am definately in. I got all of my issues with the TPS figured out, and the coolant hose that I need will be in on Wednesday. I can't wait to see your beast and meet everyone Tim always talks about.
Bill Simpson - Also looking forward to seeing your car and meeting you. I don't know if you recall, but I chated with you via email about a year and a half ago reguarding your setup, when I was looking into upgrades for my car. Are you still running a TD06? What is your current setup. You can email me if you want, tjhead_at_charter.net, I don't really want to polute the RX7 forum with MR2 jargon.
Looking forward to meeting everyone that will be there. I am not scheduled until Sunday, but I will probably be there until about 3:00 p.m. on Saturday.
T.J.
Hey all, just catching up on the thread and wanted to throw out a couple of things:
Everyone who dyno's their car gets a Penthouse Club pass, but they're not "VIP" passes, just entry passes. It is highly unlikely that anyone under 21 will be able to get in, as mentioned by another poster above.
Please make sure everything on your car is WORKING! It sucks to spend your hard earned dyno time debugging broken stuff instead of tuning for more power.
If you are making big power and can't put it down due to tire spin, make sure you have a clutch that is up to the task - you cannot spin the tires on my dyno, and if your clutch is the weak link you will find out in a big ugly smelly way.
The dynapack bolts to the wheel hubs, no chance of flying off into the woods as mentioned above. However the hub adapters require "normal" lug nuts. If you have tuner lug nuts (spline drive, etc) they will not work. I have a supply of metric 12x1.5 and 12x1.25 lug nuts, if your studs are something else, please bring standard lug nuts or contact me directly and I will obtain some (steve@lunch.org).
That's all I can think of right now, except to say I'm a big rotary fan and am really excited to have you guys coming in.
See you this weekend!
Steven
Everyone who dyno's their car gets a Penthouse Club pass, but they're not "VIP" passes, just entry passes. It is highly unlikely that anyone under 21 will be able to get in, as mentioned by another poster above.
Please make sure everything on your car is WORKING! It sucks to spend your hard earned dyno time debugging broken stuff instead of tuning for more power.
If you are making big power and can't put it down due to tire spin, make sure you have a clutch that is up to the task - you cannot spin the tires on my dyno, and if your clutch is the weak link you will find out in a big ugly smelly way.
The dynapack bolts to the wheel hubs, no chance of flying off into the woods as mentioned above. However the hub adapters require "normal" lug nuts. If you have tuner lug nuts (spline drive, etc) they will not work. I have a supply of metric 12x1.5 and 12x1.25 lug nuts, if your studs are something else, please bring standard lug nuts or contact me directly and I will obtain some (steve@lunch.org).
That's all I can think of right now, except to say I'm a big rotary fan and am really excited to have you guys coming in.
See you this weekend!
Steven
Originally Posted by LUPE
We're glad you got your car runnning. You better put out some big HP !! 

If I make half the horsepower you are putting down I will be happy.
Anything at or over 325whp will suite me just fine.
T.J.


