SoCal 's monthly San Bernardino rotary meet: Second Saturday of each month.
TUR-BO!! TUR-BO!! I'm in favor of the turbo idea, you already have the TII drivetrain, a motor, and jesse has almost everything else.....YOU CAN DO IT!!!
Speaking of turbos, Jesse, what are you planning on doing with that blown turbo motor at KC's dads house?
Speaking of turbos, Jesse, what are you planning on doing with that blown turbo motor at KC's dads house?
I think most of your problems can be solved by tuning with a wideband O2 sensor. If you can wait until July, that's when I plan to experiment with Megasquirt tuning. There's a subsection for MS now: https://www.rx7club.com/megasquirt-forum-153/
That said, turbochargers work well with drag cars, and there are lots of guys making big power with Turbo-II setups.
-s-
That said, turbochargers work well with drag cars, and there are lots of guys making big power with Turbo-II setups.
-s-
Originally Posted by riceburner1r2001
i dont how he can have these problems when mine started right up with some gas oil mix and those were my bad *** housings he has and is a barn burner at 9500.
I am as lost as you are man! I just dont understand how i can have so many problems. I mean it's not like this car is dificult to work on, i mean come on, it has a carb, and an ignition system. no fancy computers, no fancy sensors. I SHOULD just be able to slap a carb on it and call it a day. it's really not that hard. grrrrrrr. i hate this car!
Originally Posted by scotty305
I think most of your problems can be solved by tuning with a wideband O2 sensor. If you can wait until July, that's when I plan to experiment with Megasquirt tuning. There's a subsection for MS now: https://www.rx7club.com/forumdisplay.php?f=153
That said, turbochargers work well with drag cars, and there are lots of guys making big power with Turbo-II setups.
-s-
That said, turbochargers work well with drag cars, and there are lots of guys making big power with Turbo-II setups.
-s-
Wide Band! http://www.widebandcommander.com/ kinda expensive for something that would not be used much on a carburated car. but it sure would tell me what is going on with that engine wouldnt it?...... then again, so would a stand alone right?
This one is a better unit, you can find them used if you look around.
http://www.innovatemotorsports.com/products/lm1.php
As mentioned on their site, you can use the WB O2 sensor to check the effects of your carburator's jet settings. At the very least, you'll pick up HP from tuning to the proper Air/Fuel ratio. On a slightly scary note, you'll know if your car is running dangerously lean, so you can avoid detonating and ruining the motor.
-s-
http://www.innovatemotorsports.com/products/lm1.php
As mentioned on their site, you can use the WB O2 sensor to check the effects of your carburator's jet settings. At the very least, you'll pick up HP from tuning to the proper Air/Fuel ratio. On a slightly scary note, you'll know if your car is running dangerously lean, so you can avoid detonating and ruining the motor.
-s-
Originally Posted by RE Drifter
SOME SAY....
Joined: Oct 2005
Posts: 2,099
Likes: 0
From: ON THE OTHER SIDE OF THE 15FWY, NEAR THE 215
Looking For The Conversion Lights For The 1st Gen
I BEEN LOOKING FOR THE LONGEST FOR THE CONVERSION KIT FOR THE FB, THE ROUND LIGHTS, AND THEY ARE HELLA EXPENSIVE FOR MY COLLEGE STUDENT ***, ANYONE HAVE A SET OR KNOW WHERE TO GET EM CHEAP DROP ME A LINE, CTRRACING@MSN.COM
Just to let everybody know I took my kar to this shop to see what was going on and my compression is 70/50 so i need a new motor. I do want to go turbo but if anybody knows of a cheap 13b i will also take that. So if anybody knows of any or has one PM me I got the kar at my house so I'll have to drop it in over here. If I kan get anybodys help with the swap I would greatly appreciate it.
Originally Posted by fc3stech
I will help if I am not busy at the time, I would like to keep as many rotary's on the road as possible
Originally Posted by RE Drifter
Just to let everybody know I took my kar to this shop to see what was going on and my compression is 70/50 so i need a new motor. I do want to go turbo but if anybody knows of a cheap 13b i will also take that. So if anybody knows of any or has one PM me I got the kar at my house so I'll have to drop it in over here. If I kan get anybodys help with the swap I would greatly appreciate it.
Originally Posted by zero83
I also got a stage 3 clutch if your interested.(since you would have the motor out) PM if your still interested any of it.
Zero, i would imagine your engine had a little more compression then that. your engine ran pretty good. also you might want to mention that your stage 3 clutch is made my cluth masters, and is fairly new.
Originally Posted by jilongie
when's next solo2?
There's a championship that Sunday (11-27-05), too. You don't get as much track time, but you know what they say about a bad day at the races...
-s-
Originally Posted by speeddemon32
Zero, i would imagine your engine had a little more compression then that. your engine ran pretty good. also you might want to mention that your stage 3 clutch is made my cluth masters, and is fairly new.
And yes my clutch is very new. I think I put like 75 miles on it. I bought it from Casey, it was on his drag car and he never got a chance to beat on this clutch. And if any of you other guys are interested in the clutch just PM me.
Originally Posted by scotty305
The next practice is the day after Thanksgiving (11-25-05). The details haven't been announced yet, so you'll need to keep checking the website to find out where to send money. http://www.solo2.com/eventpage.asp?eid={11F342CF-C658-439F-A712-EFCDAEA45E9B}
There's a championship that Sunday (11-27-05), too. You don't get as much track time, but you know what they say about a bad day at the races...
-s-
There's a championship that Sunday (11-27-05), too. You don't get as much track time, but you know what they say about a bad day at the races...
-s-
Wow, thanks guy's. I had the compression checked on my kar like a week and a half befor it went dead and everything was a okay. But I KIT with ya and let you know what's going on later this week, as far as when I'm trying to do this.





