I thought I saved the mods on my sig.. I will update it shortly....

 

Well... I finally ran my 3rd gen down the track. I have owned her since 9/08 and have never driven her hard BUT decided what the hell... Here is the info from my time slip.

R/T - .266
60' - 2.272
330 - 5.993
1/8 - 9.000 @ 82.55
1000 - 11.552
1/4 - 13.72 @ 104.24

Here are her mods...
94 touring with a Pettit streetported motor.
Pettit intakes/DP/Catback/Pullies/Denso Supra TT fuel pump
Twins on an 11-9-11 boost pattern with stock IC
17" rims with 225/40/17 street tires.( yes the tire size is small... they are for my 1st gen that is being upgraded)


L8R

 

Good Job Joe!

 

Well, here's my latest. 2nd time to the drags. You'll notice that my 60' times are really bad. I just couldn't launch worth a crap. Best ET was 13.361, best trap was 112.62 mph. My dumb *** forgot to let some air out of the tires on the first pass and had to let off in 2nd to get traction and point the car straight On the other hand, Armen showed up and cracked off a 12.9 @ 111 or so on his first pass. Congrats dude

EDIT: mods are in my vbgarage. Bolt ons + pfc, tune, stock wheels, 245/45/16 Toyo TR-1's with about 20 psi on passes 2, 3... 30 psi on 1st pass

 

wow man you pulled a 112.6 trap... Thats very good. I did get a third run in at around 5:30pm. The weather was colder and I completley spun first and part second and got a 13.06 @112.5 Im still pretty unsatisfied with my overal times tho.

My best time/trap (two different runs) 12.96 @112.5 - 2.086 0-60ft with 245/45/16 toyo TR1

 

Here's some in car video. And yes, I know I suck

http://www.youtube.com/watch?v=FKE6YjsYOMA

 

^dude your not launching at a high enough rpm. Get the tires sticky and launch at 7k or higher. You should do much better that way, goodluck.

 

Because you are really going to be able to hook up street tires launching at 7k.

 

i got my 2.08 0-60ft by lauching at ~4000rpm and kinda bogging it.

 

hmmm I can with cheap federal tires, I would hook but after I got of line I would have to play with the throttle. I am no pro just sharing my experience i managed a 1.85 by doing this.

 

I to used to cut 1.8 60's on street tires but the wheel hop was so bad... A simple set of MT ET streets (not radial) will save you $ and improve your et by .5 seconds.

 

That's really impressive 60'. Kind of like this guy: http://www.youtube.com/watch?v=9ki5iqAbQlw

 

Yeah, I really need to work on my launches. My best 60' on street tires was a 2.1, and on that past I went 12.25 @ 118.74....stock twins.

(That pass is in the link in my sig)

 

2960lbs w/driver, Turbonetic T62-1, 550/1600, MT Drag Radial, MSD 6AL, (riding clutch off the line)

 

You really picked up some good mph in the 1/4! Almost 36mph... Nice.. Hope I can pick that much up.

get ride of those radials so you can launch that bad boy!

 

Thanks...I do have plans to get rid of the radials. With your 617rwhp, picking up 36mph shouldn't be a problem.

 

I hope to find out soon! But the local track is 1/8th but 5 mins from my house....its a drive to the 1/4 mile track.

 

Thought you guys might want to see the out of car view too. The in car vids are in my youtube sig link below. The announcer didn't know what my car was since my badges were shaved. He thought it was an MR2 Pass was 13.361 @ 110.8 mph. 2.3xx 60'. Here's a video of my 2nd pass of the day that the nice guys at motorgen.com took of my car:

http://www.motorgen.com/vid/showphot...to/889/cat/528

If you want to see a whole lot more from that day (vipers, corvettes, Buick GN's,... the works!), go to:

http://motorgen.com/forum/showthread.php?t=2161

Armen's red FD is in there too

 

2960lbs w/driver, Turbonetic T62-1, 550/1600, BFG Drag Radial, MSD 6AL,

New best time for me: 11.37@132.43mph. Still working on my 60ft. Will probably go with ET Streets

(correction to my previous post - should be BFG drag radials)

 

^^ I wish my car would go that fast. Holy ****. Do you have any vids of your passes?

 

finally got a 1/8th mile pass in. Was happy but hit rev limit (9000rpm) out of the hole and the clutch was slipping. Should be back out in 2 weeks.. video below...

http://www.youtube.com/watch?v=EwQi8xkm3Rw

 

Nice!

 

nice

 

http://www.motorgen.com//vid/showphoto.php/photo/862

I had no idea they recorded me.... This was me against my buddies 07 335 with Juice Box 3 on race gas map. I think i squeezed a 2.1 0-60ft on that run.

 

11.69 with 1.688@60'
nitto 555R --> 275-40-17
GT45 from ebay
26psi on Q16, 4x1680cc injectors, street ported
Apexi power FC
HKS Twin Power