Thinking of Modding, need some help
Thread Starter
Joined: Apr 2007
Posts: 783
Likes: 1
From: Ft. Worth, TX
https://www.rx7club.com/showthread.p...ighlight=motor
People like you make my brain hurt.
I called your blown motor and I'm calling that you will never swap for a GM motor.
People like you make my brain hurt.
I called your blown motor and I'm calling that you will never swap for a GM motor.
yeh, lol.. i have a blown engine.. lol.. thats it..
we'll see wont we?? i guess u'll feel like a jackass when i do have a 323 in my car huh?? and then u'll be kissing my ***.
Thread Starter
Joined: Apr 2007
Posts: 783
Likes: 1
From: Ft. Worth, TX
I thought they used the 6.0 iron heads more because it was a quick way to lower the compression ratio, instead of cranking it up a tick with 5.3's? 5.3 heads are for the N/A performance, if not this is news to me. What headers would you go with?
I suggest you run your ideas over at ls1tech, not the conversions subforum, post it in the FI subforum.
you'll need to upgrade the valvetrain however, and definitely the fuel system.
oh yea, for whoever asked about the iron heads:
the iron heads are preferred for high boost apps where deformation and cylinder pressures can lead to warpage, but they can detonate like mad though. The aluminum ones however, would dissipate heat more though. It's been a while since I explored the F/I LSx world, so I could be quite wrong.
I suggest you run your ideas over at ls1tech, not the conversions subforum, post it in the FI subforum.
you'll need to upgrade the valvetrain however, and definitely the fuel system.
oh yea, for whoever asked about the iron heads:
the iron heads are preferred for high boost apps where deformation and cylinder pressures can lead to warpage, but they can detonate like mad though. The aluminum ones however, would dissipate heat more though. It's been a while since I explored the F/I LSx world, so I could be quite wrong.
Thread Starter
Joined: Apr 2007
Posts: 783
Likes: 1
From: Ft. Worth, TX
Thread Starter
Joined: Apr 2007
Posts: 783
Likes: 1
From: Ft. Worth, TX
I am trully not a expert at piston motors, but do you have to change the pistons, connecting rods, crank, and cam when prepping one for boost.
I am not sure why cast iron heads are better than alum, i know someone that has a supercharged mustang that is in the 1200hp range running alum heads. I am not sure what size motor he has in there but he had to change everything except the block.
O one more thing you where online and posting
11-29-07 9 Posts in this thread
11-28-07 7 Posts in this thread
11-27-07 13 Posts in this thread
11-26-07 6 Posts in this thread
11-25-07 5 Posts in this thread
That is alot of time posting for someone that doesn't have the time to read up.
I think you are just post hoorring.
O yea i think you just got called out from above.
I am not sure why cast iron heads are better than alum, i know someone that has a supercharged mustang that is in the 1200hp range running alum heads. I am not sure what size motor he has in there but he had to change everything except the block.
O one more thing you where online and posting
11-29-07 9 Posts in this thread
11-28-07 7 Posts in this thread
11-27-07 13 Posts in this thread
11-26-07 6 Posts in this thread
11-25-07 5 Posts in this thread
That is alot of time posting for someone that doesn't have the time to read up.
I think you are just post hoorring.
O yea i think you just got called out from above.
Thread Starter
Joined: Apr 2007
Posts: 783
Likes: 1
From: Ft. Worth, TX
yeh, and i hope u get a muzzle, b/c ur mouth never stops running... if you would be so kind.. and push the little "x" up at the top corner of ur screen, and get the **** outta my thread, that would be ok.
Thread Starter
Joined: Apr 2007
Posts: 783
Likes: 1
From: Ft. Worth, TX
im glad u took the time to look up my picture.. are u gay? do u want my nuts? good job.. this picture was taken for numerous reasons.. some people thought i was lieing i had an fd.. so i took it, and stated.. "**** you", and what the real laugh is, the fact that i have the ***** to show a pic of myself on here, but, u seem not to, but, i understand, ur probably 100 lbs. overweight.. and look like u have downsyndrome... its ok.
Last edited by TT_Rotary; Dec 1, 2007 at 06:20 PM.
Thread Starter
Joined: Apr 2007
Posts: 783
Likes: 1
From: Ft. Worth, TX
and u posting my pic up, trying to insult me, just shows how pathetic u r, and how low u will go to scrape up something to try an insult me.. what does my picture have to do w/ the cost of modding a rotary engine??
please, stick to the topic or get out.. simple as that.. if u wanna try to low blow me and insult me.. do as i told tessai.. say it to my face.. not on the internet.. we all can be internet thugs, get a ****** life, please?
please, stick to the topic or get out.. simple as that.. if u wanna try to low blow me and insult me.. do as i told tessai.. say it to my face.. not on the internet.. we all can be internet thugs, get a ****** life, please?
and u posting my pic up, trying to insult me, just shows how pathetic u r, and how low u will go to scrape up something to try an insult me.. what does my picture have to do w/ the cost of modding a rotary engine??
please, stick to the topic or get out.. simple as that.. if u wanna try to low blow me and insult me.. do as i told tessai.. say it to my face.. not on the internet.. we all can be internet thugs, get a ****** life, please?
please, stick to the topic or get out.. simple as that.. if u wanna try to low blow me and insult me.. do as i told tessai.. say it to my face.. not on the internet.. we all can be internet thugs, get a ****** life, please?
I would like to say all this to your face. Will you show up to have it said?
Well most of us have shared pictures, so i guess we all have *****
https://www.rx7club.com/south-rx-7-forum-34/post-pic-yourself-car-621988/
If you want to post your pics, there is the thread
wow i think there should be a new rule you have to be registered to buy a RX7 and this guy (TT Rotary) does not qualify, and wow nice pic and no i dont want you we are all making fun of you. DUMBASS... and you might as well sell your car or move because you are making a fool out of yourself. grow up
I understand what your trying to do and the feedback your trying to get. But your going about it the wrong way man. There is a basic understanding of conversing with people in a civilized way that you simply lack. Even if the topic is a sensitive one such as this, yes this is a rotary community but you can get positive and beneficial feedback from the people on this forum about putting a v8 in an RX7 if you approach them the right way. Even the people who have done these swaps that have shown themselves in the thread don't want to help you because you're an ***, myself included.
Admittedly I don't know you all that well but from what I interpret through this thread I'm glad I don't consider you a friend or even an acquaintance of mine because I would be embarrassed. I feel sorry for your parents.
Admittedly I don't know you all that well but from what I interpret through this thread I'm glad I don't consider you a friend or even an acquaintance of mine because I would be embarrassed. I feel sorry for your parents.
You guys shouldn't even bother with this tool. All he is going to do is come back with a smart *** answer, that is irrelevant to what you're saying. You could even put it in the simplest terms and the idiots twists it up.
All and all...look at all his other threads and posts. You will see the resemblance.
He asks for advice and throws a fit when he doesn't exactly get the answer he wants to see.
He cannot even remain civil with being defensive or hostile but, that just contradicts his own words to not sit around and act like an internet thug.
All and all...look at all his other threads and posts. You will see the resemblance.
He asks for advice and throws a fit when he doesn't exactly get the answer he wants to see.
He cannot even remain civil with being defensive or hostile but, that just contradicts his own words to not sit around and act like an internet thug.
So anyways,
Hi everyone. How is everyone doing? I havent seen a lot of you guys in some time now. Whats new?
Are we going to host a big Texas get together again? That last one that I went to in Austin 87029587309847509283740895723 years ago was great. I should have a car related reason to celebrate soon enough. Maybe I should host a big get together?
Hi everyone. How is everyone doing? I havent seen a lot of you guys in some time now. Whats new?
Are we going to host a big Texas get together again? That last one that I went to in Austin 87029587309847509283740895723 years ago was great. I should have a car related reason to celebrate soon enough. Maybe I should host a big get together?
Thread Starter
Joined: Apr 2007
Posts: 783
Likes: 1
From: Ft. Worth, TX
wow i think there should be a new rule you have to be registered to buy a RX7 and this guy (TT Rotary) does not qualify, and wow nice pic and no i dont want you we are all making fun of you. DUMBASS... and you might as well sell your car or move because you are making a fool out of yourself. grow up
wait, post in my thread?? just ignore this thread if you dont like it, you ****** ********.. your obviously the ****** dumbass.. posting in my thread.. if u dont want nothing to do w/ it, dont post in it, simple as that.. ****** retard.
Thread Starter
Joined: Apr 2007
Posts: 783
Likes: 1
From: Ft. Worth, TX
I understand what your trying to do and the feedback your trying to get. But your going about it the wrong way man. There is a basic understanding of conversing with people in a civilized way that you simply lack. Even if the topic is a sensitive one such as this, yes this is a rotary community but you can get positive and beneficial feedback from the people on this forum about putting a v8 in an RX7 if you approach them the right way. Even the people who have done these swaps that have shown themselves in the thread don't want to help you because you're an ***, myself included.
Admittedly I don't know you all that well but from what I interpret through this thread I'm glad I don't consider you a friend or even an acquaintance of mine because I would be embarrassed. I feel sorry for your parents.
Admittedly I don't know you all that well but from what I interpret through this thread I'm glad I don't consider you a friend or even an acquaintance of mine because I would be embarrassed. I feel sorry for your parents.
Thread Starter
Joined: Apr 2007
Posts: 783
Likes: 1
From: Ft. Worth, TX
You guys shouldn't even bother with this tool. All he is going to do is come back with a smart *** answer, that is irrelevant to what you're saying. You could even put it in the simplest terms and the idiots twists it up.
All and all...look at all his other threads and posts. You will see the resemblance.
He asks for advice and throws a fit when he doesn't exactly get the answer he wants to see.
He cannot even remain civil with being defensive or hostile but, that just contradicts his own words to not sit around and act like an internet thug.
All and all...look at all his other threads and posts. You will see the resemblance.
He asks for advice and throws a fit when he doesn't exactly get the answer he wants to see.
He cannot even remain civil with being defensive or hostile but, that just contradicts his own words to not sit around and act like an internet thug.
Thread Starter
Joined: Apr 2007
Posts: 783
Likes: 1
From: Ft. Worth, TX
this goes for the rest of you who want to insult me over the internet, any ****** 12 yr old can be an internet thug, say it to my face, or **** off.. simple as that.. u wanna say something intelligent, go ahead, just dont make a douche outta urself.. this thread is obviously gone way off topic thanks to the academy award winning ********.. who need to go **** themselves.. and stop being such a ******** to people asking questions and people wanting simple information.. i didnt ask any of u bitches for a novel.. just a simple answer.. thats it.. but no, it had to turn into a big drama/flame thread, so every1 who wants to put there 2 cents in and insult me.. **** YOU!! go to hell, say it to my face, or dont say it at all.
You came on here asking for help. I gave you some info and you failed to obtain from it.
NO ONE on here is going to treat YOU like a douche..unless you act like one.
Since supposedly you own this thread...at the time no one had nothing against you.
Then your attitude went out the window. Hell you've only been here since April.
People are going to continue to post here..no matter what you say. Just say off the tough guy act. Im not even cussing or cutting you down.....
NO ONE on here is going to treat YOU like a douche..unless you act like one.
Since supposedly you own this thread...at the time no one had nothing against you.
Then your attitude went out the window. Hell you've only been here since April.
People are going to continue to post here..no matter what you say. Just say off the tough guy act. Im not even cussing or cutting you down.....
Inside a thread, profanity will only be allowed if used in a controlled manner, and not directed at a particular forum member. Again, just try and be respectful of other forum members.
You seem to not even be able to follow a simple FORUM rule. IE; run your mouth.
You seem to not even be able to follow a simple FORUM rule. IE; run your mouth.
Thread
Thread Starter
Forum
Replies
Last Post
thecody59
1st Generation Specific (1979-1985)
40
Aug 23, 2015 06:41 PM
RCCAZ 1
1st Generation Specific (1979-1985)
5
Aug 11, 2015 07:05 PM







