Furb: RX-7 FC
#104
This is the first time seeing this thread, VERY nice car, to bad its not in the states, would love to see it in person.
what hood is that?
what hood is that?
Last edited by -Crash-; 06-29-10 at 04:49 PM.
#106
Rotary Enthusiast
Thread Starter
iTrader: (2)
Join Date: May 2005
Location: E-L Netherlands
Posts: 1,165
Likes: 0
Received 0 Likes
on
0 Posts
another update:
foudn out why the boost did not go any higher then 12psi...
in the AVCR, the start boost settings for 4th and 5th gear were at -40%, so that explains it!
set everything properly and i am now running 16psi all the way to 7500-8000rpm
foudn out why the boost did not go any higher then 12psi...
in the AVCR, the start boost settings for 4th and 5th gear were at -40%, so that explains it!
set everything properly and i am now running 16psi all the way to 7500-8000rpm
#111
Rotary Enthusiast
Thread Starter
iTrader: (2)
Join Date: May 2005
Location: E-L Netherlands
Posts: 1,165
Likes: 0
Received 0 Likes
on
0 Posts
Lol, i didnt break the engine.... never did!
Has done 58000km since i bought it and still running great
Just meant that i took everything out...
i had some leaks i needed to fix for some time now.
And i competed in the Dutch Time-Attack series last weekend.. major cooling issues!
Decided to take everyting out and change the entire setup... so stay tuned
Has done 58000km since i bought it and still running great
Just meant that i took everything out...
i had some leaks i needed to fix for some time now.
And i competed in the Dutch Time-Attack series last weekend.. major cooling issues!
Decided to take everyting out and change the entire setup... so stay tuned
#112
Full Member
seriously mate...your's and the hayward rotary FC of the team green project lately are mine insperation to my project, i got great ideas for it, unfortenatly i don't have much time and income to create my own project, i don't have lack of ideas but have lack of resources, and here in Portugal its' a nightmare...the economy and not the only thing is bullsh*t, but that's not important...anyway, of all of the FC's that i saw on the web, in here at the forum and in person, like i previously said it your's and the hayward rotary are my favorite, and i got some pics of your fc in my mobile and in the laptop at the desktop i opened a topic of my fc at the "introduce yourself", it's totally stock but still it's one of a kind for me.
keep up the good work...(btw that pic with the graffiti eye behind your FC is awsome just love it...the only thing that i ad it there maybe was a sakura tree)
cheers.
keep up the good work...(btw that pic with the graffiti eye behind your FC is awsome just love it...the only thing that i ad it there maybe was a sakura tree)
cheers.
#114
Rotary Freak
iTrader: (7)
Dude Furb! Its like your starting all over again from scratch.
So what kind of oil cooling setup are you going with? Thats one thing I have to work on, on my own car. When I've gone to the Nurburgring or Hockenheim my oil temps would be well into the 240's and then my water temps would start to creep up.
So what kind of oil cooling setup are you going with? Thats one thing I have to work on, on my own car. When I've gone to the Nurburgring or Hockenheim my oil temps would be well into the 240's and then my water temps would start to creep up.
#122
5 and counting.
iTrader: (7)
Lol, i didnt break the engine.... never did!
Has done 58000km since i bought it and still running great
Just meant that i took everything out...
i had some leaks i needed to fix for some time now.
And i competed in the Dutch Time-Attack series last weekend.. major cooling issues!
Decided to take everyting out and change the entire setup... so stay tuned
Has done 58000km since i bought it and still running great
Just meant that i took everything out...
i had some leaks i needed to fix for some time now.
And i competed in the Dutch Time-Attack series last weekend.. major cooling issues!
Decided to take everyting out and change the entire setup... so stay tuned
I cant wait to see your new set-up
#123
Rotary Enthusiast
Thread Starter
iTrader: (2)
Join Date: May 2005
Location: E-L Netherlands
Posts: 1,165
Likes: 0
Received 0 Likes
on
0 Posts
engine is almost clean, so i can start building again this week.
parts ordered and on their way:
- Davies Craig EWP115 electric waterpump with digital controller (no thermostat needed anymore)
- RotaryWorks waterpump adapter
- RotaryWorks FD intake pipe
- Rotary Aviation OMP adapter
- 2x B&M oilcooler incl AN fitment stuff
going to modify the radiator and intercooler to adjust it to my needs
parts ordered and on their way:
- Davies Craig EWP115 electric waterpump with digital controller (no thermostat needed anymore)
- RotaryWorks waterpump adapter
- RotaryWorks FD intake pipe
- Rotary Aviation OMP adapter
- 2x B&M oilcooler incl AN fitment stuff
going to modify the radiator and intercooler to adjust it to my needs
#124
Rotary Enthusiast
Thread Starter
iTrader: (2)
Join Date: May 2005
Location: E-L Netherlands
Posts: 1,165
Likes: 0
Received 0 Likes
on
0 Posts
today was another productive day...
first i fitted a greddy compression tube and some piping to an FD, also adjusted his boostcontroller a bit.. made him a happy man!
i sold the Greddy compression tube because it bends towards the center of the car and this will be a problem with my v-mount.
i found that the RotaryWorks intake tube is straight, so i think that one will be perfect!
then i went back to work on the FC
replaced the seal in the front cover and LIM waterpassage o-rings because they were leaking.
got the engine all nice and clean and starting to build
was fiddling with my intake an throttlebody
removed the centerpiece of the UIM, as they aren't even separated in the TB all the way.
BEFORE
AFTER
flowed the inlet side of the throttle body, removed a lot a material here.
BEFORE (don't have any better pics of it)
AFTER
first i fitted a greddy compression tube and some piping to an FD, also adjusted his boostcontroller a bit.. made him a happy man!
i sold the Greddy compression tube because it bends towards the center of the car and this will be a problem with my v-mount.
i found that the RotaryWorks intake tube is straight, so i think that one will be perfect!
then i went back to work on the FC
replaced the seal in the front cover and LIM waterpassage o-rings because they were leaking.
got the engine all nice and clean and starting to build
was fiddling with my intake an throttlebody
removed the centerpiece of the UIM, as they aren't even separated in the TB all the way.
BEFORE
AFTER
flowed the inlet side of the throttle body, removed a lot a material here.
BEFORE (don't have any better pics of it)
AFTER