3rd Gen General Discussion The place for non-technical discussion about 3rd Gen RX-7s or if there's no better place for your topic

How to value your FD

Thread Tools
 
Search this Thread
 
Old Feb 9, 2022 | 03:32 AM
  #4926  
Redbul's Avatar
Lives on the Forum
Tenured Member: 10 Years
Community Builder
Community Influencer
Liked
iTrader: (27)
 
Joined: Mar 2015
Posts: 7,018
Likes: 1,680
From: B.C.
'99 was the only year for "highlight silver".
Reply
Old Feb 9, 2022 | 09:14 AM
  #4927  
DaleClark's Avatar
RX-7 Bad Ass
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (56)
 
Joined: Jan 2002
Posts: 15,622
Likes: 2,724
From: Pensacola, FL
FYI, many of the Tourings were repainted by Mazda back when they were new-ish. Mazda used a "high reflex" painting system on the Tourings that was supposed to be super-duper but it didn't have good adhesion between the primer and the paint. The cars would very quickly be speckled with tons of spots on the front where the paint came off due to bad adhesion.

In those cases Mazda repainted the cars, they had to sand the cars all the way down to bare metal since the primer layer was the fault. New primer, paint, and clear.

This was VERY common when the cars were under warranty, I remember a lot of discussion on the big list over the topic in the mid-90's.

Dale
Reply
Old Feb 9, 2022 | 09:29 AM
  #4928  
ZE Power MX6's Avatar
Boilermakers!
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (170)
 
Joined: Nov 2002
Posts: 3,771
Likes: 379
From: Chicago, IL
Originally Posted by mr2peak
Remeber insurance cost, maintenance, yearly tax, etc. I highly doubt more than a handful of people truly make money. The best you can hope for is to break a little more even.
Insurance: $300 a year
Maintenance: Short term near $0, long term it depends but flipper don't hold long.
Yearly tax: $100 a year

So depend on your buy and sell price I think you can make a profit no? Unless the guy is flipping for pennies, if so he is doing it wrong lol.
Reply
Old Feb 9, 2022 | 11:14 AM
  #4929  
j9fd3s's Avatar
Moderator
Community Builder
Liked
Loved
Community Favorite
iTrader: (3)
 
Joined: Mar 2001
Posts: 31,833
Likes: 3,232
From: https://www2.mazda.com/en/100th/
Originally Posted by Redbul
'99 was the only year for "highlight silver".
when i did this i made the dates for the different versions line up better than they do in real life...


Reply
Old Feb 9, 2022 | 12:06 PM
  #4930  
Redbul's Avatar
Lives on the Forum
Tenured Member: 10 Years
Community Builder
Community Influencer
Liked
iTrader: (27)
 
Joined: Mar 2015
Posts: 7,018
Likes: 1,680
From: B.C.
Do we see any Sunlight Silver Spirit R?

. Fine print in the brochure seems to indicate that SS was limited to the Bathurst model.
Reply
Old Feb 9, 2022 | 12:10 PM
  #4931  
j9fd3s's Avatar
Moderator
Community Builder
Liked
Loved
Community Favorite
iTrader: (3)
 
Joined: Mar 2001
Posts: 31,833
Likes: 3,232
From: https://www2.mazda.com/en/100th/
Originally Posted by Redbul
Do we see any Sunlight Silver Spirit R?

. Fine print in the brochure seems to indicate that SS was limited to the Bathurst model.
i'm not really the Sprit R guy, but i think it was the Titanium Gray. SS was everything else, but again i'm not sure
Reply
Old Feb 9, 2022 | 04:39 PM
  #4932  
KYPREO's Avatar
www.AusRotary.com
Tenured Member: 20 Years
Liked
Loved
Community Favorite
 
Joined: Apr 2003
Posts: 905
Likes: 272
From: Melbourne, Australia
Sunlight Silver was available across the full version 6 colour range EXCEPT Spirit R and the Type R Bathurst R (which came in blue, white and yellow only).

They made a total of 456 in Sunlight Silver 22V made up as follows:

Type R: 36
Type R Bathurst: 184
Type RB: 88
Type RB-S: 80
Type RS: 68

It's a beautiful colour - and one of the least common.



Reply
Old Feb 9, 2022 | 07:16 PM
  #4933  
GoodfellaFD3S's Avatar
Original Gangster/Rotary!
Veteran: Army
Tenured Member: 25 Years
Liked
Loved
iTrader: (213)
 
Joined: Mar 2001
Posts: 30,804
Likes: 646
From: FL-->NJ/NYC again!
Lightbulb

I'm digging the sunlight silver quite a bit.

Prefer it over SSM....... just want to publicly state that Jerome is incorrect, for some of us it's our least fav color. I'm pretty happy with my current black & blue stable, plus I have an itch for CYM that I need to scratch again one of these days


Reply
Old Feb 9, 2022 | 08:27 PM
  #4934  
Redbul's Avatar
Lives on the Forum
Tenured Member: 10 Years
Community Builder
Community Influencer
Liked
iTrader: (27)
 
Joined: Mar 2015
Posts: 7,018
Likes: 1,680
From: B.C.
Someday it may be a $30 million colour too!


Reply
Old Feb 10, 2022 | 12:04 PM
  #4935  
Redbul's Avatar
Lives on the Forum
Tenured Member: 10 Years
Community Builder
Community Influencer
Liked
iTrader: (27)
 
Joined: Mar 2015
Posts: 7,018
Likes: 1,680
From: B.C.

RX7 Prices, Ferrari dreams!
Reply
Old Feb 15, 2022 | 04:12 AM
  #4936  
Redbul's Avatar
Lives on the Forum
Tenured Member: 10 Years
Community Builder
Community Influencer
Liked
iTrader: (27)
 
Joined: Mar 2015
Posts: 7,018
Likes: 1,680
From: B.C.
https://buyee.jp/item/yahoo/auction/...uggest_history

@GoodfellaFD3S

Last edited by Redbul; Feb 15, 2022 at 01:05 PM.
Reply
Old Feb 15, 2022 | 07:20 AM
  #4937  
Molotovman's Avatar
Ban Peak
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (50)
 
Joined: Jul 2002
Posts: 4,246
Likes: 549
From: Northern Virginia
Originally Posted by GoodfellaFD3S
I'm digging the sunlight silver quite a bit.

Prefer it over SSM....... just want to publicly state that Jerome is incorrect,
SSM is the greatest FD color, DJ is correct.
Reply
Old Feb 15, 2022 | 01:17 PM
  #4938  
GoodfellaFD3S's Avatar
Original Gangster/Rotary!
Veteran: Army
Tenured Member: 25 Years
Liked
Loved
iTrader: (213)
 
Joined: Mar 2001
Posts: 30,804
Likes: 646
From: FL-->NJ/NYC again!
Wink

Originally Posted by Molotovman
SSM is the greatest FD color, DJ is correct.
.....says the guy painting his FD purple
Reply
Old Feb 15, 2022 | 02:26 PM
  #4939  
Molotovman's Avatar
Ban Peak
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (50)
 
Joined: Jul 2002
Posts: 4,246
Likes: 549
From: Northern Virginia
Originally Posted by GoodfellaFD3S
.....says the guy painting his FD purple
As long as I find one I like, if not maybe I'll do 4G.
Reply
Old Feb 15, 2022 | 06:12 PM
  #4940  
johnd08's Avatar
Junior Member
 
Joined: Jun 2020
Posts: 35
Likes: 1
From: Michigan
Value of my 93 FD

So, very interesting post on values because after more than 6 years of working on a car that I was trying to modify for some street and track fun I am beat up and getting out. I started in 2016 with a 93 FD that I took to Chip Motorsport to rebuild primarily for track fun. The car is still street legal, but my goal was weekend warrior. Long story short I got taken for a ride with my checkbook and everything Chip did (30+) I paid Chris from Banzai to re-do. new engine, whole 9 yards. I still have a hard time sitting down. So, after Chris and Covid, I still needed someone to help me out. Every time I took the car out it would break. Slowly over the last 2-3 years I have replaced problem areas to where this year I think I am good to go-only I am not-lost interest and want to move on in my life in other directions. I have literally replaced everything you can replace on this car. My last project, new trans rebuild from Pettit cost me 7 stitches and a very sore finger for 4 weeks (lost control of the tranny as I lowered it to the ground). Oh well! The body has 127,000 but the parts, (all) are new-you name it, I replaced or re-built it. I kept most all of the Oem interior as I stripped it. I would like to be done with this car-would anyone hazard a good asking and selling price or am I going to be hanging on to this til my dying day? Help please.
Reply
Old Feb 15, 2022 | 06:40 PM
  #4941  
Redbul's Avatar
Lives on the Forum
Tenured Member: 10 Years
Community Builder
Community Influencer
Liked
iTrader: (27)
 
Joined: Mar 2015
Posts: 7,018
Likes: 1,680
From: B.C.
Maybe start a new thread and post many pics. People will likely give you lots of feedback.
Reply
Old Feb 20, 2022 | 01:40 AM
  #4942  
Redbul's Avatar
Lives on the Forum
Tenured Member: 10 Years
Community Builder
Community Influencer
Liked
iTrader: (27)
 
Joined: Mar 2015
Posts: 7,018
Likes: 1,680
From: B.C.
https://buyee.jp/item/yahoo/auction/...ce_page_search


LHD LS1 swap for sale in Japan.

Says it is certified.
Reply
Old Feb 24, 2022 | 09:18 AM
  #4943  
Grossy3's Avatar
Newbie
 
Joined: Feb 2022
Posts: 3
Likes: 1
From: OH
speaking of extra money you have to spend on a FD, does anyone know how much an inspection is? I've seen a few FDs that I like, but before anything I'd want to get the entire thing inspected to make sure there aren't any problems, no rust, etc.
Reply
Old Feb 24, 2022 | 09:30 AM
  #4944  
Grossy3's Avatar
Newbie
 
Joined: Feb 2022
Posts: 3
Likes: 1
From: OH
speaking of extra money you have to spend on a FD, does anyone know how much an inspection is? I've seen a few FDs that I like, but before anything I'd want to get the entire thing inspected to make sure there aren't any problems, no rust, etc.
Reply
Old Feb 24, 2022 | 10:59 AM
  #4945  
bossbattleRX7's Avatar
Full Member
Tenured Member: 5 Years
Liked
Loved
Community Favorite
 
Joined: Nov 2020
Posts: 108
Likes: 129
From: NJ
Originally Posted by Grossy3
speaking of extra money you have to spend on a FD, does anyone know how much an inspection is? I've seen a few FDs that I like, but before anything I'd want to get the entire thing inspected to make sure there aren't any problems, no rust, etc.
It depends on who inspects it. I had a friend and fellow FD owner come with me when I purchased my last FD. Alternatively, you can have a fellow forum member or local rotary shop check it out. In my experience a pre-purchase inspection (PPI) can range from free (friend/generous forum member) to a couple hundred bucks. It completely depends on the shop. Elephant in the room: rotary shops are in short supply and your average mechanic may not be well equipped to do a proper FD RX-7 inspection without guidance. A specific rotary compression tester, for example, is preferable to a regular compression tester.

The issue I found when purchasing my first FD in 2020 was that the cars were selling before I could even see them or get them inspected. It seems like that situation has only gotten worse. That said, I strongly advocate a PPI. You're doing the right thing--just make sure you get it done quickly. Chances are that the FDs you like are already sold unless they're sitting unlisted in someone's yard.
Reply
Old Feb 24, 2022 | 11:17 AM
  #4946  
Redbul's Avatar
Lives on the Forum
Tenured Member: 10 Years
Community Builder
Community Influencer
Liked
iTrader: (27)
 
Joined: Mar 2015
Posts: 7,018
Likes: 1,680
From: B.C.
Getting a vid of them conducting a compression test, is a good start. A serious seller should provide that. Otherwise assume a $10,000 engine rebuild in the near future. Spot buyers are likely assuming that.
Reply
Old Feb 26, 2022 | 02:09 AM
  #4947  
Manny_Apex's Avatar
@Pettit Racing
Veteran: Air Force
Tenured Member 10 Years
iTrader: (1)
 
Joined: Apr 2012
Posts: 486
Likes: 190
From: Palm Bay, FL
Originally Posted by Grossy3
speaking of extra money you have to spend on a FD, does anyone know how much an inspection is? I've seen a few FDs that I like, but before anything I'd want to get the entire thing inspected to make sure there aren't any problems, no rust, etc.
I think some of us can agree...if you have to ask how much it cost the get the car inspected, this probably isn't the car for you. You're going to be spending A LOT on owning a FD if you can't do the inspection yourself. I'd be in well over $100k if you factored in the labor cost since I've owned my FD.
Reply
Old Feb 26, 2022 | 02:38 AM
  #4948  
Redbul's Avatar
Lives on the Forum
Tenured Member: 10 Years
Community Builder
Community Influencer
Liked
iTrader: (27)
 
Joined: Mar 2015
Posts: 7,018
Likes: 1,680
From: B.C.
BC

How much per hour, exactly , do you charge yourself?

Are hours spent just thinking about one's car chargeable at an hourly rate.?

Reply
Old Feb 26, 2022 | 09:13 AM
  #4949  
j9fd3s's Avatar
Moderator
Community Builder
Liked
Loved
Community Favorite
iTrader: (3)
 
Joined: Mar 2001
Posts: 31,833
Likes: 3,232
From: https://www2.mazda.com/en/100th/
Originally Posted by GoodfellaFD3S
.....says the guy painting his FD purple
so this one time, at the dealership, the customer had a car that had rear end clunks (this is before anyone figured out it was the pillow *****, my friend wrote the bulletin actually), and the guy had had the car in a bunch of times to try and fix it, and failed.
he was talking with the Mazda rep at this point, and he goes since you can't fix the clunks, how about the paint. the rep said ok, as long as we agree you will STFU after this.

so he took his black R1, and painted it M3 purple. Mazda paid for it, it looks pretty nice actually.
Reply
Old Feb 26, 2022 | 09:37 AM
  #4950  
HiWire's Avatar
Rotary Freak
Tenured Member: 15 Years
Liked
Loved
Community Favorite
 
Joined: Apr 2009
Posts: 1,560
Likes: 256
From: Toronto
If the car had a name, it could be Surrealistic (Purple) Pillow (after the Jefferson Airplane album). The first song on the album is She Has Funny Cars.

Last edited by HiWire; Feb 26, 2022 at 11:42 AM.
Reply



All times are GMT -5. The time now is 07:13 PM.