AAAAAAAAAHHHHHHHHHHHRRRRRRRRRRRRR MUST GO TO BED BUT CAN'T!!!! HAHAHAHAHA huughhhh......

if all this works out... maybe 'the kit master' would be willing to do some interior for us FCers? make it feel more like a cockpit than just a plain old car cab.

 

I thought of that as well, but haven't had to opportunity to discuss it with the maker since he is still on these stupid damn autoshow trips! (who needs autoshows anyways? ) Anyway, I think the front bumer will fit both series' FC's dince I doubt that he would use the stock molding in his designs. I am sure that a guy with a creative mind such as his will work through that problem. I really doubt that he would design 2 seperate models according to year to match trim. That would involve 2 seperate molds for every kit he produces, including future ones When I know what he thinks, then you all will know

 

at any rate, it'd be best if you brought this up with him and showed him some pictures of the differences. just in case, because there are tons of people that don't know there are differences. Just to be safe.

 

I definately agree. It is listed on my list of things to go over with him

 

just wondering if there was any more news.

 

Why yes there is You posted right during my conversation with Leonard lol

Here is some more news:

First off, he is back from his trip and finishing his previous commitments and then we are in business. He has the link to this forum and the thread so he will be reading all of the posts and checking out all of the pictures that have ben posted. He will also be signing up on the forum and posting a "hi" in the near future. Here are a few answers to some of the questions real quick. I am sure he can and will answer the others more indepth when he joins up here.


Hoods? if so, then maybe CF or FG?

He said that it is defiantely a possibility and more than likely will happen. The thing is though, is he wants to do the kits first, then make the hoods to match the kit. It doesn't make sense to have a hood that might be aggressive and the rest of the car stock. If they were made they would be FG I assume.


Fenders to go with the kit? Seperately?

Again, he wants to roll out the kit first, and then work on things like a set of fenders and hoods. I did forget to ask him about interior parts though, and I won't speculate on if he can do them or not because I really have no idea


Kit Material? Choices with it?

The kit will be fiberglass. He has some really cool stories about some of the other kits he has made, including a car with one of his front ends on it that hit a wall in his parking lot and it screwed up the wall but did little damage to the car or bumper. The typical thickness is roughly 1/8" thick and very uniform in its thickness throughout the kit. The kits he has made previously have not had any complaints on durability. He can also make them thicker or thinner at the customers request when ordering.

Pricing? Why is the wing $500??

Pretty simple. Most people order the wing before anything else. He has to make more "tools" for the wing (molds) since they are used so much more, therefore he has to charge more to offset the costs. Also the wings are typically 3 piece units. They require larger boxes for shipping that cost a significantly more amount. Like I said before though, these are going to be top notch kits and pieces. From what I have seen there will be no regrets.

On a side note, he did mention alot about doing custom lights because "noone wants to have the stock lights in comparison to those who want the aftermarket ones "

Also, now is a good time to decide if you are going to be one of the first to pre-order. I know we will all want to see drawings and so forth, but the tools have to be made before you can sell kits. Hell, count me in!!

 

didn't you say you got it for free?

 

Dunno about free. I am just the consultant on behalf of the RX-7 community I am hoping for a significant discount, or maybe some help with the race car as far as body kits for it go We'll see when we get to that bridge.

 

I just have one request of the new kit. Make sure that the front nose isnt too low to the ground or anything like that. My friend has a front end on his Eclipse that makes it impossible to go over any speed bumps or even to pull in to many driveways. As for myself, I would need a kit that still allows my car to be functional as a daily driver.

 

Amen to that. My friend's CRX is so low to the ground that if I jump into the car, it'll bottom out. Also it's really scary whenever he goes into residential neighborhoods with the crappy roads in North Seattle.

Peace,
AJ ^_^

PS: MasterRX I notice that on your bio thingy on the left it says you're located in Edmonds. Might I ask you post a pic of your car so I can keep a lookout for it? If anything just to wave hello to a fellow Rexor. ^_-

 

this is too important to get to the second page.

ADMIN? STICKY?

 

Just list them by number of either views of replies This is the only thread on this section with over 235 replies and over 6600 views LOL That is how I find it if it isn't on the 1st page.

Sticky would be nice though. Saves time heh

 

COME ON STICKY!

 

You got it.

 

PRE ORDER ?

I wouln't miend doing that but don't you have at least a sketch and i would have to talk to some one befor seending money
i mean i would just like a idea what it would look like
and soon i am varry close to speending about 4900 on a kit so
i donno a time that the sketch might be available ?
or some thing
i donno would like to help
Andrew(every body has a little rice in them) YANG

 

except for im in ontario canada, and that $1650 is us dollars right??

**** thats expensive here then,

do yu think if i ordered 10 kits or something that it would be considerably less or.....


well hope it turns out, can;t wait to see sketches..

Action



"Theres no speed limit between 0 - 60"

 

Hey, fc3s thats awesome that your website got put in scc, it's great that they are finally recognizing fc's, rock on man, hey if you ever need any help with it, just let me know, im going to be installing a custom sub enclosure soon, so maybe i can take pics of the installation, and you can put them on your site, hey im interested in a body kit too, there are so many great ideas, ill just wait to see what the final result is,
Jason

 

No he obviously won't be taking any orders at all until there are at least sketches done. After he is ready to start making the tools (molds for the pieces) then he will start taking the pre-orders. Personally I am dying to see how this turns out. It is killing me! I will be calling him this week to get any further info that I can. You guys will be the first to know any new news.

Thanks for the sticky Mykl

 

True, but imagine what a $4000 USD kit costs there I am sure that he would br interested in making some sort of deal with you on an order of 10 kits. That of course is something you would have to discuss with him. I will let him know that there is talk of it

 

Thanks man. We are really stoked about it too. That would be great for some pics and write-up of the install. If anyone ever does an install of something and has some digital pics and a write-up of how you did it, I am always happy to post it to the site. I have a few in there now that were done by someone else and then sent to me.

 

hi. just wondering. i have a hks fmic. would i have problems installing the front new bumper? i didnt have to cut any parts off the stock bumper to make the intercooler fit but i wouldnt like to redo the piping or anything for a new bumper. thanks.

 

*dips easy p-cheesy in steamy vat of cat semen*
sticky enough for ya?

 

You should be OK. Worse case scenerio would be you might have to trim the bumper to fit around the FMIC, but I won't know for sure until we see some kits in the prototype stages.

 

I assume he has some ideas for what the kit will look like, doesn't he? When will we be able to see some sketches? When can we pre-order? Can we get several people together and order in bulk for a discount? I am definately interested in a hood that will still work with a stock intercooler on an 88 TII. Let us know

Kris

 

Yes, he and his designers have some ideas, but until he actually gets into the project, then there won't be any sketches. He will provide all of the info for the pre-ordering. If you buy a bulk order yourself, then yes I am sure he would do something for you, but this is not a group buy on the forum. More info as I know something!