Time Slips and Dyno Section is for posting 1/4 mile time slips and dyno graphs

Time Slips

Old Sep 8, 2009 | 03:43 AM
  #376  
WaachBack's Avatar
Finally Knows
Tenured Member: 20 Years
Liked
Loved
iTrader: (22)
 
Joined: Sep 2003
Posts: 1,108
Likes: 0
From: Hawaii
Originally Posted by fitzrx7
You must be talking to TRWeiss1. The funny thing is I ran a 11.7@125 on one of my slower passes the same night before I did the 11.5@121, and I dyno'd 402whp.

Hey TRWeiss1, was that pass you did on the 20psi/475whp tune? Edit: Just watched the video, it was on "low boost" and 460whp. Interesting...
Nah, I was talking to you. You only need about 440whp in an FD to run 10s. As you can see, Ive done 11.4 on the stock twins. Its very possible with your setup at 20psi and ET Streets. Get some A/I, up the boost and post those 10 sec slips!
Reply
Old Sep 9, 2009 | 01:30 AM
  #377  
fitzrx7's Avatar
Running Lean
Tenured Member 15 Years
iTrader: (1)
 
Joined: Aug 2002
Posts: 415
Likes: 0
From: Hometown of Deland FL
Yeah, I'm gonna be looking into W/I, mainly for road track intake temps the way that Damian has it set up. Not really looking for 10's, and even on the road track I probably won't be on my 15psi boost, I just want the motor to stay together so I can get all the track upgrades (rims/tires/BBK) I want for next year.
Reply
Old Sep 14, 2009 | 02:04 AM
  #378  
REDBULLSTX's Avatar
Full Member
Tenured Member 10 Years
iTrader: (4)
 
Joined: Oct 2008
Posts: 210
Likes: 2
From: Beaumont, TX
yep

93 r1. greddy t-78 kit, power fc barely tuned running super rich. on MT ET street bias ply. 15psi on 93 octane. on a very shitty track lol. will post vids
RT:0.75336
60ft:1.769
1/8th:7.56788
1/8th mph:92.06
1/4:11.78474
1/4mph:116.64
Reply
Old Sep 16, 2009 | 06:21 PM
  #379  
blue_87's Avatar
Junior Member
 
Joined: Aug 2008
Posts: 10
Likes: 0
From: quebec
What time may I expect if my mod are:

Stock rebuid motor, 99 spec twin, PFC 14psi, pettite vmount intercooler, HKS twin power, upgraded fuel pump, small pully, light flywheel, dp 3'', resonate mp 3'', cat back 3''. Also, no air pump, no AC and a koyo rad with street tire 255/40/17

Ty

Last edited by blue_87; Sep 16, 2009 at 06:22 PM. Reason: My mods wasnt ok
Reply
Old Sep 17, 2009 | 09:44 AM
  #380  
2slo4my7's Avatar
Senior Member
Tenured Member 10 Years
iTrader: (3)
 
Joined: Jun 2008
Posts: 281
Likes: 2
From: Ottawa
Went to the track last weekend.

60ft: 1.90
1/4 : 12.72
mph:108

Mods: Intake, SMIC, 3"exhaust with high flow cat, Pettit ECU, 13psi, my lapping RA-1 tires @ 18psi
Reply
Old Sep 17, 2009 | 11:04 AM
  #381  
BenjiRX-7's Avatar
Senior Member
Tenured Member 05 Years
iTrader: (3)
 
Joined: Aug 2007
Posts: 383
Likes: 0
From: Monteral, QC
went to the track yesterday, pretty cold night, new personnal record

60' : 2.095
1/4: 13.632
trap: 101.61 mph

mods: Fighter's garage intake, HKS downpipe, lightweight flywheel. everything else stock, Street tires @ 32 psi
Reply
Old Sep 18, 2009 | 07:59 PM
  #382  
WaachBack's Avatar
Finally Knows
Tenured Member: 20 Years
Liked
Loved
iTrader: (22)
 
Joined: Sep 2003
Posts: 1,108
Likes: 0
From: Hawaii
Originally Posted by blue_87
What time may I expect if my mod are:

Stock rebuid motor, 99 spec twin, PFC 14psi, pettite vmount intercooler, HKS twin power, upgraded fuel pump, small pully, light flywheel, dp 3'', resonate mp 3'', cat back 3''. Also, no air pump, no AC and a koyo rad with street tire 255/40/17

Ty
Low 12s with good driving.
Reply
Old Sep 24, 2009 | 01:04 AM
  #383  
REDBULLSTX's Avatar
Full Member
Tenured Member 10 Years
iTrader: (4)
 
Joined: Oct 2008
Posts: 210
Likes: 2
From: Beaumont, TX
Originally Posted by REDBULLSTX
93 r1. greddy t-78 kit, power fc barely tuned running super rich. on MT ET street bias ply. 15psi on 93 octane. on a very shitty track lol. will post vids
RT:0.75336
60ft:1.769
1/8th:7.56788
1/8th mph:92.06
1/4:11.78474
1/4mph:116.64
http://www.youtube.com/watch?v=I6lDe0V1wsE
Reply
Old Oct 3, 2009 | 10:40 AM
  #384  
turbo10th's Avatar
Rotary Enthusiast
Tenured Member 15 Years
iTrader: (6)
 
Joined: Sep 2006
Posts: 1,467
Likes: 2
From: Annapolis,MD
R/T .090
60' 1.618
330 4.662
1/8 7.181
MPH 99.59
1000 9.301
1/4 11.101
MPH 126.54

I have 475 rwhp@17psi on pump(93) and meth on a single BW turbo(61.5mm) and all supporting mods on a street ported engine from PFS. No two step or anti lag, ET street bias ply(old) at 16psi, and stock struts with eibach springs. Has full interior and all acessories(including a/c) except for the air pump. That was my first pass and went for another and blew the diff.
Reply
Old Oct 17, 2009 | 04:52 PM
  #385  
koa's Avatar
koa
808
Tenured Member 15 Years
iTrader: (1)
 
Joined: Jan 2005
Posts: 93
Likes: 0
From: San Antonio/Burnet
Took it out to the track last night and got my personal best ET and 60ft. 62-1 turbo, 550/1600 at 25psi, stock drivetrain. Finally got into the 10's!!!!!!!

60 ft - 1.55
1/8 -6.99
1/8 mph - 101
1/4 - 10.87
1/4 mph - 128

Best 60ft of the night- 1.49
Reply
Old Oct 17, 2009 | 07:34 PM
  #386  
mdpalmer's Avatar
T O R Q U E!
Tenured Member 10 Years
iTrader: (24)
 
Joined: Jan 2004
Posts: 2,034
Likes: 1
From: far far away
Thumbs up

Originally Posted by koa
Took it out to the track last night and got my personal best ET and 60ft. 62-1 turbo, 550/1600 at 25psi, stock drivetrain. Finally got into the 10's!!!!!!!

60 ft - 1.55
1/8 -6.99
1/8 mph - 101
1/4 - 10.87
1/4 mph - 128

Best 60ft of the night- 1.49
^^ holy cow dude, props. That is one really quick car! Kinda funny, I think a Bugatti Veyron runs around 10.8's, just like you
Reply
Old Oct 17, 2009 | 10:11 PM
  #387  
koa's Avatar
koa
808
Tenured Member 15 Years
iTrader: (1)
 
Joined: Jan 2005
Posts: 93
Likes: 0
From: San Antonio/Burnet
Originally Posted by mdpalmer
^^ holy cow dude, props. That is one really quick car! Kinda funny, I think a Bugatti Veyron runs around 10.8's, just like you
Thanks....its an obsession! You always want to go faster
Reply
Old Oct 28, 2009 | 09:14 AM
  #388  
Rotor Nut.
Tenured Member 20 Years
iTrader: (34)
 
Joined: Feb 2002
Posts: 2,163
Likes: 2
From: RI
koa nice run. i am in the same boat trying to break into the 10's. my 3-4 shift was terrible you can here me basicly let off on the 11.003 run. need to work on that.

here were my 3 best runs.

1.68 60'
11.003 131.38 mph
http://www.youtube.com/watch?v=Yi9VVnFxkuA

1.82 60'
11.105 132.54
http://www.youtube.com/watch?v=AHMBFI2ZpFI

1.89 60'
11.151 132.37
http://www.youtube.com/watch?v=g1111V1EY74

vids..
Reply
Old Oct 28, 2009 | 10:28 PM
  #389  
fastrx7man's Avatar
Looking for 10's
Tenured Member: 20 Years
iTrader: (63)
 
Joined: Nov 2001
Posts: 3,568
Likes: 1
From: Lantana, Texas
Originally Posted by koa
Took it out to the track last night and got my personal best ET and 60ft. 62-1 turbo, 550/1600 at 25psi, stock drivetrain. Finally got into the 10's!!!!!!!

60 ft - 1.55
1/8 -6.99
1/8 mph - 101
1/4 - 10.87
1/4 mph - 128

Best 60ft of the night- 1.49

Congrats....Mine should be done in another week or two. Looking to make that 10 second pass soon...
Reply
Old Oct 28, 2009 | 11:03 PM
  #390  
koa's Avatar
koa
808
Tenured Member 15 Years
iTrader: (1)
 
Joined: Jan 2005
Posts: 93
Likes: 0
From: San Antonio/Burnet
Originally Posted by smg944
koa nice run. i am in the same boat trying to break into the 10's. my 3-4 shift was terrible you can here me basicly let off on the 11.003 run. need to work on that.

here were my 3 best runs.

1.68 60'
11.003 131.38 mph
http://www.youtube.com/watch?v=Yi9VVnFxkuA

1.82 60'
11.105 132.54
http://www.youtube.com/watch?v=AHMBFI2ZpFI

1.89 60'
11.151 132.37
http://www.youtube.com/watch?v=g1111V1EY74

vids..
Damn....you are right there knocking on the 10sec door. I foresee a 10sec pass in the very near future. gotta love those trap speeds
Reply
Old Oct 28, 2009 | 11:05 PM
  #391  
koa's Avatar
koa
808
Tenured Member 15 Years
iTrader: (1)
 
Joined: Jan 2005
Posts: 93
Likes: 0
From: San Antonio/Burnet
Originally Posted by fastrx7man
Congrats....Mine should be done in another week or two. Looking to make that 10 second pass soon...

thanks...are you coming down to SA for the next MM or IFO? Looking forward to seeing you run
Reply
Old Nov 3, 2009 | 05:18 PM
  #392  
turbo10th's Avatar
Rotary Enthusiast
Tenured Member 15 Years
iTrader: (6)
 
Joined: Sep 2006
Posts: 1,467
Likes: 2
From: Annapolis,MD
Smile

Last friday at the MIR track rental finally got into the 10's. Best pass.

60 ft - 1.61
1/8 -7.00
1/8 mph - 100.77
1/4 - 10.86
1/4 mph - 124.51
Reply
Old Nov 4, 2009 | 07:29 PM
  #393  
WaachBack's Avatar
Finally Knows
Tenured Member: 20 Years
Liked
Loved
iTrader: (22)
 
Joined: Sep 2003
Posts: 1,108
Likes: 0
From: Hawaii
Nice, time. What does your setup look like?
Reply
Old Nov 4, 2009 | 08:20 PM
  #394  
turbo10th's Avatar
Rotary Enthusiast
Tenured Member 15 Years
iTrader: (6)
 
Joined: Sep 2006
Posts: 1,467
Likes: 2
From: Annapolis,MD
Thanks.
Large street port(built by PFS), Borg Warner s362 extended tip(61.5mm .81 a/r), 850/1600 injectors, apexi power FC, bosch 044 in tank, and a bunch of other stuff. Had 475rwhp@17psi on pump and meth(50/50 water meth)
Suspension, stock base struts and eibach pro kit springs.
Tires, 26x10.5x16 ET streets bias ply.
Reply
Old Nov 5, 2009 | 10:18 PM
  #395  
koa's Avatar
koa
808
Tenured Member 15 Years
iTrader: (1)
 
Joined: Jan 2005
Posts: 93
Likes: 0
From: San Antonio/Burnet
Originally Posted by turbo10th
Last friday at the MIR track rental finally got into the 10's. Best pass.

60 ft - 1.61
1/8 -7.00
1/8 mph - 100.77
1/4 - 10.86
1/4 mph - 124.51
Nice run.........Congrats!
Reply
Old Nov 9, 2009 | 05:45 PM
  #396  
turbo10th's Avatar
Rotary Enthusiast
Tenured Member 15 Years
iTrader: (6)
 
Joined: Sep 2006
Posts: 1,467
Likes: 2
From: Annapolis,MD
Got a better time at imports vs domestics.
R/T .084
60' 1.573
330 4.442
1/8 6.840
MPH 101.90
1000 8.879
1/4 10.636
MPH 128.13

Best 60' was a 1.51 and mph was 128. Same mods.
Reply
Old Nov 10, 2009 | 04:23 PM
  #397  
tt7hvn's Avatar
Rotary Enthusiast
Tenured Member 10 Years
iTrader: (5)
 
Joined: Nov 2005
Posts: 1,319
Likes: 1
From: New Bern, NC
^ you obviously need to update your sig, i know i bought that 10th AE from you!

-someday i'll pick up that hood


you also need to post some pics of your 93 in the 3rd gen section, i wanna see it
Reply
Old Nov 10, 2009 | 05:15 PM
  #398  
turbo10th's Avatar
Rotary Enthusiast
Tenured Member 15 Years
iTrader: (6)
 
Joined: Sep 2006
Posts: 1,467
Likes: 2
From: Annapolis,MD
Yea havent updated the sig in awhile. I have posted pics a few times just there are alot of post there away.
Reply
Old Nov 11, 2009 | 06:58 PM
  #399  
seandizzie's Avatar
Senior Member
Tenured Member 15 Years
iTrader: (1)
 
Joined: Apr 2003
Posts: 536
Likes: 1
From: fwb.florida
1/8th mile. .018 -reaction
1.91 -60ft
5.3 -330
8.108-et
92.98-trap

This is on a streetported 35r at 12psi on 225/50/16 street tires with 1.6 deg of camber in the rear. Had to ride the hell outa the clutch, granny shift and can't get my foot to the floor until the top of second gear or tire spin and wheel hop would occur. Wish I had traction.
Reply
Old Dec 13, 2009 | 09:53 PM
  #400  
tscharf18's Avatar
Junior Member
Tenured Member 05 Years
 
Joined: Oct 2009
Posts: 23
Likes: 0
From: san clemente, ca
im trying to upload mine but my computer sucks
Reply

Thread Tools
Search this Thread

All times are GMT -5. The time now is 02:24 PM.