will this suspension make my tires rub??
#1
Full Member
Thread Starter
Join Date: Apr 2008
Location: san diego, mission valley
Posts: 162
Likes: 0
Received 0 Likes
on
0 Posts
will this suspension make my tires rub??
ok so i am looking at some tyko blues, which would be a two inch drop. with that drop will my tires rub heres what i am currently running on the stock suspension with no trouble, 225/40/18. someone help me pretty please...
#6
Full Member
Thread Starter
Join Date: Apr 2008
Location: san diego, mission valley
Posts: 162
Likes: 0
Received 0 Likes
on
0 Posts
not sure what my offset is......... i will have to get back to ya on that one and if you say its only going to drop an inch then i souldnt have anything to worry about anyways. ill let you know what it is.
ok my offset is 42mm....so any problems in my future?
ok my offset is 42mm....so any problems in my future?
#7
Lives on the Forum
You're almost certainly going to need spacers. What's the width of those wheels?
Hint: the more information you give in the beginning, the faster you'll get a response and the more people are likely to take the time to respond, since you took the time to ask properly.
Hint: the more information you give in the beginning, the faster you'll get a response and the more people are likely to take the time to respond, since you took the time to ask properly.
Trending Topics
#10
#11
Full Member
Thread Starter
Join Date: Apr 2008
Location: san diego, mission valley
Posts: 162
Likes: 0
Received 0 Likes
on
0 Posts
ok so what size would i need to run 245's cuz thats what i wanna shoot for however i dont want the wheels all ***** nilly out the sides cuz im not a fan of widebody kits nor can i afford one i just want wider tires that will not rub the lowered suspension?? and anyone got these said spacers that they might not want????
#12
Full Member
Thread Starter
Join Date: Apr 2008
Location: san diego, mission valley
Posts: 162
Likes: 0
Received 0 Likes
on
0 Posts
the size is 18x7.5 this is what the specs say exatly 18 x 7.5 (+42mm) 4 x 100 / 4.50
heres the link to the page even http://store.phantasmusa.com/sm96187082.html
heres the link to the page even http://store.phantasmusa.com/sm96187082.html
#13
Lives on the Forum
That seems like a lot to pay for cheap generic rip off wheels that aren't especially wide and have a bad offset (by that I mean they won't fit, it'll hit the suspension).
If you want to run 245's up front, you'll need at most about a 30mm offset, and 245's are getting to be about the absolute limit and you'll almost certainly need to roll fenders. 245's are also getting to be pretty damn wide for a 7.5" wide wheel, you'd be better off with at least an 8" wide, preferably 8.5" or 9" wide.
My advice is to buy quality wheels. I've been screwed by cheap wheels failing after not much use. My Rota track wheels developed a crack around the lug hole due to a bad design, so they're junk now, money wasted.
Enkei RPF1's are about the best deal out there for wheels, quite reasonably priced, very strong and very light (under $1k and about 15.5lbs for the 17x8.5 30mm offset). That combined with some 235/40/17's is my reccomendation. Should fit fine up front, but might need a bit of a fender roll.
If you want to run 245's up front, you'll need at most about a 30mm offset, and 245's are getting to be about the absolute limit and you'll almost certainly need to roll fenders. 245's are also getting to be pretty damn wide for a 7.5" wide wheel, you'd be better off with at least an 8" wide, preferably 8.5" or 9" wide.
My advice is to buy quality wheels. I've been screwed by cheap wheels failing after not much use. My Rota track wheels developed a crack around the lug hole due to a bad design, so they're junk now, money wasted.
Enkei RPF1's are about the best deal out there for wheels, quite reasonably priced, very strong and very light (under $1k and about 15.5lbs for the 17x8.5 30mm offset). That combined with some 235/40/17's is my reccomendation. Should fit fine up front, but might need a bit of a fender roll.
#14
Full Member
Thread Starter
Join Date: Apr 2008
Location: san diego, mission valley
Posts: 162
Likes: 0
Received 0 Likes
on
0 Posts
yea new wheels would be great and fine however i dont have the money for new wheels unless soeone wanted to do a one for one trade im still out of luck. what about a spacer that can make up the diff??
#17
Full Member
Thread Starter
Join Date: Apr 2008
Location: san diego, mission valley
Posts: 162
Likes: 0
Received 0 Likes
on
0 Posts
i am just trying to do as much reasearch aboutthe matter before i do so to keep from having any problems in the future. why not come prepared????
#19
Full Member
Thread Starter
Join Date: Apr 2008
Location: san diego, mission valley
Posts: 162
Likes: 0
Received 0 Likes
on
0 Posts
acually yea i do have the wheels i am just doing the research on the tires cuz i want wider tires to go along with the suspension i am about to buy. check out my pics that car is mine.
#21
if you're planning to run 18s on stock body with no front lip you'll still look a 4x4. Even if you get that 1" drop from your new suspension there will still be a good inch of wheel gap depending on what kind of tires you purchase. Why not just save up the money you're planning to buy rims and tires and just get a decent set of coilovers.. atleast you know that part of the car is done with, and you won't need to go back and get say another set of suspension if you ever decide to drop lower, or run more aggressive wheels where it requires negative camber to fit unrolled fenders. Patience is the key to victory, and in this case victory = slammed and flush car.
#22
Full Member
Thread Starter
Join Date: Apr 2008
Location: san diego, mission valley
Posts: 162
Likes: 0
Received 0 Likes
on
0 Posts
ok i dont know why everyone thinks that i am buying wheels, just wider tires and new suspension, i would love to have some sweet *** coilover but i am going to make due with what i got. i will just get some 235/40 and see what happens with the new suspension.
Thread
Thread Starter
Forum
Replies
Last Post