so in comparison to the gt35r how does the 500 stack up? Which gets full boost sooner and at what rpm? Which has more power output at 15psi? I've read alot about both turbos but can't seem to get a straight answer

 

All the info is there, spool up is near identical, the 500R will allow more boost and slight edge in lower boost efficiency. At 15lbs depending on who has what setup ie exhaust, IC, etc. it could almost go either way. As the boost level rises though, the 500R will walk away from the 35R.

-S-

 

reading this post makes me impatient...cant wait to get my kit...im dying to have it installed...

 

Sean - Is it also more efficient with larger porting as apposed to more boost? I currently have a street port but my next engine (hopefully not for years ) I will do an extended port with a 1/2 bridge (from a 100' diving platform j/k). I may increase to 20lbs eventually with water injection but for now it will be tuned for 14-16lbs depending on 85% max fuel.

 

cant take it anymore...i've been waiting for a month now...its driving me crazy..

 

any updates on this kit? i've been waiting for mine for a month and a half now...

 

Sorry I didn't hit this yesterday I thought it was you same post above. Just waiting on the next batch of turbo's to be finished. I'm trying to stay ahead on the orders but getting the wheels to come in from garrett can sometimes not converge well timing wise with orders made. You look to be in the next batch of kits to leave.

-S-

 

Any update on when turbo only will be offered? I have been waiting now for almost 8 months. ahhaha.

CJG

 

^LoL! Keep holding your breath!

 

dont care about when the turbo is going to be offered...my concern is when is my kit going to be ready? its been 2 long months now....

 

Can this kit be used with an M2 Large IC, if custom piping is made.

 

It has been done, but you have to modify the hot side endtank:

 

Why couldn't I just make it up and over instead of around?

 

Looks like the hood wouldnt clear...

 

Maybe it is just me but i don't see it guess it would have to be infront of me.

 

any update as to when the next shipment is going out? I've been waiting for 3 months now...

but anyways...post more pics of the 500r kit...

 

Your kit is good to go, we had two items that wound up on back order our stainless transitions were on a three week back order. And our wheels, both seem to be fine now. Some time we wind up ordering stuff faster than they can keep it in supply, not totally a bad thing


-S-

 

I'm told my kit is shipping out tomorrow, I can't wait to get it

 

You got the fancy new full 4" exhaust too to bad I don't get to hear it. I'll get some pics for you before it leaves.


-S-

 

Yeah, please do. Also, just wanted to verify that it'll fit with a differential brace, ryan said he wasn't positive about that.

 

Sean, ??

 

It should fit I don't have a car here with one on but I do nknow the dimensions, The bigger issue you have over nick is he had no centre muffler so getting yours up high enough and over enough was a bit harder.

-S-

 

Movin on up! Cant wait to see the results. G

 

+1

so shoud I upgrade my exhaust system? I am currently running the rb duals..Thanks in advance

 

How´s it going whit these kits?

Lets here from those who has them...

And Sean, how´s the production going? How long do once have to wait for one?