Post cars that are running the E&J Throttle Body. Trying to see who's running them !
#52
Rotary Freak
Join Date: Nov 2001
Location: trinidad and tobago
Posts: 2,715
Likes: 0
Received 0 Likes
on
0 Posts
So I guess it wouldn't be a good idea to swap my original ProJay hat for one of those ? I actually thought (and read too !) that the divider caused the charge to accelerate faster and hence yield better distribution / cylinder filling and hence more HP ?
#53
At the level these cars are at and the operation enviroment does not require changing ignition events and it simplifies the installation and normally results in better success.
#56
Senior Member
I too have stuck with the dizzy for many years but have just recently switched to cas, may have been a waste of time.
#59
DETH TRP
iTrader: (7)
Join Date: Mar 2004
Location: Manhattan Beach, CA
Posts: 2,544
Likes: 0
Received 0 Likes
on
0 Posts
What EMS are you guys using for the 8 injectors? Running all a single size?
Does anyone use like 4-720's and 4-1680's, then you could idle and run vacuum with the 720's and then bring on the 1680's in boost?
Sorry for the threadjacking, I'm really getting interested in this setup for possible street/strip use.
Does anyone use like 4-720's and 4-1680's, then you could idle and run vacuum with the 720's and then bring on the 1680's in boost?
Sorry for the threadjacking, I'm really getting interested in this setup for possible street/strip use.
#60
It's up to the individual opinion and need!
#61
*** Bless The USA
Thread Starter
iTrader: (8)
Join Date: Jan 2007
Location: Saint Louis / Illinois
Posts: 7,139
Received 0 Likes
on
0 Posts
What EMS are you guys using for the 8 injectors? Running all a single size?
Does anyone use like 4-720's and 4-1680's, then you could idle and run vacuum with the 720's and then bring on the 1680's in boost?
Sorry for the threadjacking, I'm really getting interested in this setup for possible street/strip use.
Does anyone use like 4-720's and 4-1680's, then you could idle and run vacuum with the 720's and then bring on the 1680's in boost?
Sorry for the threadjacking, I'm really getting interested in this setup for possible street/strip use.
I have a thread here where people are helping me wire it up for 8 injectors while keeping a nice idle.
https://www.rx7club.com/haltech-forum-62/help-me-wire-my-e6k-8-1680-cc-injectors-695039/
#63
Full Member
Join Date: Nov 2006
Location: Suffolk, VA
Posts: 209
Likes: 0
Received 0 Likes
on
0 Posts