Very nice, thanks for the info.

Good luck with it!!!!!!!

What turbo if you don't mind?

 

personally I like the S400 with a/r .96 in exhaust.( from MIKE TURBO) but I dont have it.

 

I am running the S400 but with the 1.32 a/r. Are you planning on running the 80mm wheel? It sounds like your motor is capable of way more than a 9 second pass!

 

74 or 80 mm is good . yes this car capable to run 9.?? sec., but the tranny I dont know how long it would last?

 

 

 

Whats with the early housings? Does that mean you double up the water seals to overcome the seal grooves in both the JC irons and the early housings??

 

Thanks for pointing that out, I didn't see it before. Now that you mention it, I thought only 12A housings came like that.

 

So, are all those guys using the mazdatrix throttle cable bracket ?

 

 

Dam viking i can see that you like the cars for pr and fl.The photobucket pohto dont show.I cant wat to go to the pan ams.

 

i been seeing this for a while im very interested in runing this just wondering how much will this cost and were can i get a kit from and how will i have to change

 

Thread back from the dead.. A better pic of the TB without the hat

 

can somebody hook me up with some info bout this lol

 

............... mine

 

What do you want to know?

 

[QUOTE=13B-RX3;9965583]

i see on the first page, pic 9, 12. i see 12 is your car i believe, whaT brake setup is in your car. i see no brake booster

 

Chrysler master, wilwood 4 pistons out back, wilwood single piston up front, and a wilwood proportioning valve.

 

What chrysler is it from? im interested in putting it on my car. idk how well it would do with the stock 4 piston calipers but anythigns worth a try. i like it its small

 

just wanting to know how to set this up on my t2

 

Im going this route when i do the TII swap in my first gen ,E&J throtlebody, Jay tech mani, microtech LT10 with a intercooled Holset HX52!!! should be pretty beastly

 

You need:

ECU
Intake manifold
TB
TB hat

Pro Jay sells the parts invididually or as a set:

http://pro-jay.com/BUNDLES_c12.htm;j...7.qscstrfrnt03

 

I dont rememb er what thread it was but it had the E&J TB and the Projay kinda like a vs. thing going on. i like the E&J better. When rxparts first got there website going they had the E&J TB along with the manifolds and top hats. Now i dont see them on there site. My question is WHAT MANIFOLD is rxparts selling with the E&J TB?

 

E&J TB is more popular, probably because Jay stopped producing his products for a while. Jay came up with a redesign TB (the one on his site) and it is bad ***.

Either way, u can't go wrong

 

wonder what the jtech flows compaired to ej