Hey guys
Does anybody know the size of the hole of the banjo fitting on the oil injectors?? 8mm 10mm????
Also what size AN fitting do I need for the oil feed lines from the top front iron and for the oil cooler lines
Am thinking of going -10AN for the oil cooler and turbo feed and drain lines
And info would help
Thanks jc

 

Anybody??

 

10mm banjo for oil injectors. I normally do them -3 .

 

-10AN is too large for the turbo oil feed. Its ok for the drain though.

I think you need a -4AN or -6AN oil feed and an appropriate oil restrictor for the turbo your running.

 

I used -6 for the turbo suppily, -10 for the oil coolers.

 

Ok thanks guys
So turbo supply should be -6an
And return -10 got it.. Thanks
But what's the size of the hole on the iron 18mm??

 

Great so the oil injector banjo size is a 10mm am trying to make new -4 braided lines for them.. Is the banjo fitting at the omp a 8mm??
And what do you mean -3?? How??
Thanks jc

 

As in Dash 3 Hose.

Ill get back to you about the thread on the oil metering pump.

 

Ok thanks