SE RX-7 Forum Serving the Carolina's, Georgia, Florida, Alabama, and Tennessee.
Sponsored by:

Old guys with 12As club meeting

Thread Tools
 
Search this Thread
 
Old May 4, 2016 | 09:47 AM
  #18501  
tool and die guy's Avatar
Rotary Enthusiast
Tenured Member: 10 Years
 
Joined: Jun 2014
Posts: 923
Likes: 36
From: Lillington NC
I simply don't believe you were in the darkroom all night. You must've had help. Those are great shots and the subject matter couldn't be better. Nothing I like better than seeing a whole bunch o wankels lined up for parade. Wish I could've made it. That yellow 79 is a gem.
Reply
Old May 4, 2016 | 10:32 AM
  #18502  
YELLOWGSLSE's Avatar
Rotary Enthusiast
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (7)
 
Joined: Oct 2001
Posts: 800
Likes: 90
From: Atl, GA
It was great to meet/see everyone again! I'll definitely make a point to attend more regularly.
Reply
Old May 4, 2016 | 11:40 AM
  #18503  
ray green's Avatar
Thread Starter
Gone
iTrader: (14)
 
Joined: Jul 2002
Posts: 11,442
Likes: 210
Thanks for the comments on the photos guys, taking good pictures is easy when you've got a good story to tell.

Paul I do have help in the darkroom, one scantily clad assistant who is a lot of fun at 1 am.
Reply
Old May 4, 2016 | 11:46 AM
  #18504  
ray green's Avatar
Thread Starter
Gone
iTrader: (14)
 
Joined: Jul 2002
Posts: 11,442
Likes: 210
Hey Dudes, check out the OCD on Gene's RX-4. That guy knows how to tune a decellerator!

Name:  gene1_zpstjymk6it.jpg
Views: 98
Size:  265.9 KB
Reply
Old May 4, 2016 | 12:41 PM
  #18505  
tool and die guy's Avatar
Rotary Enthusiast
Tenured Member: 10 Years
 
Joined: Jun 2014
Posts: 923
Likes: 36
From: Lillington NC
Originally Posted by ray green
Thanks for the comments on the photos guys, taking good pictures is easy when you've got a good story to tell.

Paul I do have help in the darkroom, one scantily clad assistant who is a lot of fun at 1 am.
I've had plenty of darkroom time but never with a scantily clad assistant. I'm thinking you sent them to Fotomat and developed other things in the safelight!!! Lends a whole new meaning to STop and Fix doesn't it!!? Great pics Ray.. You have a good eye for composition...then again anytime it's an Rx7 in the pic it's already perfect composition isn't it?

I got good news today on my claim for the trans fluid incident on the way here from Ohio. They're picking up the tab for a full blown exterior and engine bay detail. Per suggestion from an earlier post I'm on my way to ProShine now to set up appointment for the works! More on that later. Damn I wish I could've made last nights meet.pixs were so good I feel like I was there.
Reply
Old May 5, 2016 | 02:15 PM
  #18506  
tool and die guy's Avatar
Rotary Enthusiast
Tenured Member: 10 Years
 
Joined: Jun 2014
Posts: 923
Likes: 36
From: Lillington NC
Well guys took it to ProShine Detailers for look over...Not impressed. Taking it Savannah car wash on Monday where they have a couple guys that specialize in all day "one offs" of interior/exterior Detailers. They'll clay bar it and buff clean/wax. Should be AOK. More later.
Reply
Old May 6, 2016 | 11:13 AM
  #18507  
TrianglePower's Avatar
'Vert Lover
Tenured Member 05 Years
iTrader: (1)
 
Joined: Aug 2014
Posts: 337
Likes: 0
From: Buford, GA
Too bad you don't live up this way. The GOOD detailers where I work are top notch.
Reply
Old May 6, 2016 | 05:16 PM
  #18508  
tool and die guy's Avatar
Rotary Enthusiast
Tenured Member: 10 Years
 
Joined: Jun 2014
Posts: 923
Likes: 36
From: Lillington NC
Originally Posted by TrianglePower
Too bad you don't live up this way. The GOOD detailers where I work are top notch.
Same in Akron Ohio. Tried Savannah car wash. Again not impressed. Going to Savannah CarSpa in Pooler next. Maybe 3rd time a charm??
Reply
Old May 6, 2016 | 08:48 PM
  #18509  
craaaazzy's Avatar
Slowly but surely
Tenured Member 05 Years
iTrader: (9)
 
Joined: May 2011
Posts: 1,678
Likes: 10
From: GA
Originally Posted by tool and die guy
Same in Akron Ohio. Tried Savannah car wash. Again not impressed. Going to Savannah CarSpa in Pooler next. Maybe 3rd time a charm??
Are there oil marks or some sort of stains on the paint? What have these detailers done so far? I've got a friend who's recently gotten into the detailing business so I can ask him what can/should be done if u'd like.
Reply
Old May 7, 2016 | 06:16 AM
  #18510  
ray green's Avatar
Thread Starter
Gone
iTrader: (14)
 
Joined: Jul 2002
Posts: 11,442
Likes: 210
Sounds like a job for Paint Thinner!
Reply
Old May 7, 2016 | 07:29 AM
  #18511  
tool and die guy's Avatar
Rotary Enthusiast
Tenured Member: 10 Years
 
Joined: Jun 2014
Posts: 923
Likes: 36
From: Lillington NC

Originally Posted by craaaazzy
Are there oil marks or some sort of stains on the paint? What have these detailers done so far? I've got a friend who's recently gotten into the detailing business so I can ask him what can/should be done if u'd like.
Actually the car looks ok to most. I'm just picky and pissed that I had it properly detailed last fall, stored and brought out for the trip only to have that happen. Pic shows what it looked like after I rolled it off the trailer. I still see the film on the paint and I can feel it too. Again most people would not. Since I paid for the extra insurance I'm going to get a new detail out of it.just makes sense to me. but I'm not letting a bunch of amateurs do it either. Headed to CarSpa this morning for talk w them. Fingers crossed
Reply
Old May 7, 2016 | 11:15 AM
  #18512  
tool and die guy's Avatar
Rotary Enthusiast
Tenured Member: 10 Years
 
Joined: Jun 2014
Posts: 923
Likes: 36
From: Lillington NC
CarSpa it is. He's the real deal as far as I can tell. Near west side old Savannah.

On another note I just PM'd Carlos to find out when we can get together to figure what the loud noise is in my front end. At highway speed (50-55 and above) it develops a resonant noise so loud that it's hard to talk over it. Wheel bearings are new and just about everything replaced a year ago. At 70 when I push in the clutch and coast it's still there but different. At certain speeds the resonance is so radical it vibrates the **** out of the instrument cluster. It's possible that it's the tires. In an effort to stay stock, rims and all I bought the only tires I could find in that 205 60 14 size. They're called ( don't laugh!!) Nankang Toursport 611. They look great, are not directional but the sipe pattern does look like it is. Only ones I could find. I read a few reviews on them and recall one guy complaining they were the loudest tires he ever used. I bought em anyway. I'm hoping that's all it is but if that's the case then I may have to consider going to 15's (50's) with new wheels(rims) if that be the case there goes the stock look and I'll have to also convert away from the 114.3 lug pattern too. Never F'ing ends does it(?) Always wanted a set of Panasports with gray centers and chrome outer rings. We'll see what Carlos thinks when he drives it. It's very annoying.
Reply
Old May 7, 2016 | 03:07 PM
  #18513  
craaaazzy's Avatar
Slowly but surely
Tenured Member 05 Years
iTrader: (9)
 
Joined: May 2011
Posts: 1,678
Likes: 10
From: GA
Originally Posted by tool and die guy
Actually the car looks ok to most. I'm just picky and pissed that I had it properly detailed last fall, stored and brought out for the trip only to have that happen. Pic shows what it looked like after I rolled it off the trailer. I still see the film on the paint and I can feel it too. Again most people would not. Since I paid for the extra insurance I'm going to get a new detail out of it.just makes sense to me. but I'm not letting a bunch of amateurs do it either. Headed to CarSpa this morning for talk w them. Fingers crossed
I hope that's mostly water that I see everywhere on the car and not oil!
Reply
Old May 7, 2016 | 04:45 PM
  #18514  
tool and die guy's Avatar
Rotary Enthusiast
Tenured Member: 10 Years
 
Joined: Jun 2014
Posts: 923
Likes: 36
From: Lillington NC
Originally Posted by craaaazzy
I hope that's mostly water that I see everywhere on the car and not oil!
Yes.. It is.. It had just rained when I drove it off. The trans fluid mixed with dust/dirt and rain does make it look worse. The place I'm taking it is old school, plus he's keeping it three days. Clay bar all over again along with buffing cleaner and wax should get it all back. Engine bay being done as well along w interior. The trans fluid pretty much negated the shine along w me washing it with Dawn to get most of it off. Carlos coming Monday to check out the noise. Could be anything at this point. More later. Can't drive it anymore till we get to the bottom of it.
Reply
Old May 10, 2016 | 10:42 AM
  #18515  
BrettLinton7's Avatar
Lots of rotors
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (34)
 
Joined: Jan 2006
Posts: 3,401
Likes: 75
From: North GA
Check out my score from this weekend, dudes. Thanks to Alex's sleuthing skills, I got this rebuilt 13B REW in Charleston for a heck of a deal.

Reply
Old May 10, 2016 | 02:33 PM
  #18516  
craaaazzy's Avatar
Slowly but surely
Tenured Member 05 Years
iTrader: (9)
 
Joined: May 2011
Posts: 1,678
Likes: 10
From: GA
Originally Posted by BrettLinton7
Check out my score from this weekend, dudes. Thanks to Alex's sleuthing skills, I got this rebuilt 13B REW in Charleston for a heck of a deal.
nice. hope u fixed the coolant leak.
Reply
Old May 10, 2016 | 07:53 PM
  #18517  
t_g_farrell's Avatar
Waffles - hmmm good
Tenured Member: 20 Years
Community Favorite
iTrader: (1)
 
Joined: Jul 2004
Posts: 9,250
Likes: 464
From: Lake Wylie, N.C.
Originally Posted by BrettLinton7
Check out my score from this weekend, dudes. Thanks to Alex's sleuthing skills, I got this rebuilt 13B REW in Charleston for a heck of a deal.
What? You already need a new engine Brent. Should a got a 12A.
Reply
Old May 11, 2016 | 08:00 AM
  #18518  
BrettLinton7's Avatar
Lots of rotors
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (34)
 
Joined: Jan 2006
Posts: 3,401
Likes: 75
From: North GA
Originally Posted by craaaazzy
nice. hope u fixed the coolant leak.
I figured out that whenever I drive it hard, it pukes coolant out of the overflow... It's happened once more since the meet.

Originally Posted by t_g_farrell
What? You already need a new engine Brent. Should a got a 12A.
I can't argue with you there...
Reply
Old May 11, 2016 | 02:12 PM
  #18519  
NISxMO's Avatar
Full Member
 
Joined: Jul 2008
Posts: 151
Likes: 9
From: Savannah
Originally Posted by tool and die guy
Well guys took it to ProShine Detailers for look over...Not impressed. Taking it Savannah car wash on Monday where they have a couple guys that specialize in all day "one offs" of interior/exterior Detailers. They'll clay bar it and buff clean/wax. Should be AOK. More later.

Just got back into the country from my Honeymoon. There has been a lot to catch up on but it has all been very entertaining reading everyone's antics. Looks like the meet went well! Its always good to see so many rotaries in one place regardless of engine configuration!

Sorry for the bad tip toolguy, I have only ever used them for interior work but have seen cars come out of there looking pretty good.
CarSpa always seems to get good reviews but I have never spoken to them personally.


In either case I can't wait to see the pics of the finished product. Hopefully I can get my paint reworked in the near future as well!
Reply
Old May 11, 2016 | 02:19 PM
  #18520  
NISxMO's Avatar
Full Member
 
Joined: Jul 2008
Posts: 151
Likes: 9
From: Savannah
On another note, the U joint replacement did not fix my rear end noise (I believe the rear end is about go go kaboom) but fortunately one of the guys on the facebook page said he has one with all new bearings and a good diff that hes willing to part with for free if I can get it to Savannah.


Only in the rotary community do offers such as these present themselves. Motorcyclist are a close second but not to this level!

In the process of rediscovering the rear end noise I did take her out for a quick wash and ended up snapping a few pics.

Name:  20160511_102448.jpg
Views: 101
Size:  161.9 KB

Name:  20160511_102500.jpg
Views: 97
Size:  165.5 KB

Last edited by NISxMO; May 11, 2016 at 02:36 PM.
Reply
Old May 11, 2016 | 03:28 PM
  #18521  
t_g_farrell's Avatar
Waffles - hmmm good
Tenured Member: 20 Years
Community Favorite
iTrader: (1)
 
Joined: Jul 2004
Posts: 9,250
Likes: 464
From: Lake Wylie, N.C.
I washed mine too!

Reply
Old May 11, 2016 | 03:50 PM
  #18522  
tool and die guy's Avatar
Rotary Enthusiast
Tenured Member: 10 Years
 
Joined: Jun 2014
Posts: 923
Likes: 36
From: Lillington NC
Originally Posted by t_g_farrell
I washed mine too!

Now that's celebrity "rubbing it in" !! At a boy, milk it as long as you can!!
Reply
Old May 11, 2016 | 03:58 PM
  #18523  
tool and die guy's Avatar
Rotary Enthusiast
Tenured Member: 10 Years
 
Joined: Jun 2014
Posts: 923
Likes: 36
From: Lillington NC
Originally Posted by NISxMO
Just got back into the country from my Honeymoon. There has been a lot to catch up on but it has all been very entertaining reading everyone's antics. Looks like the meet went well! Its always good to see so many rotaries in one place regardless of engine configuration!

Sorry for the bad tip toolguy, I have only ever used them for interior work but have seen cars come out of there looking pretty good.
CarSpa always seems to get good reviews but I have never spoken to them personally.


In either case I can't wait to see the pics of the finished product. Hopefully I can get my paint reworked in the near future as well!
No tip given in good faith is ever a bad one. I just didn't feel like they specialize in older cars. I appreciate sharing your good experiences. Congratulations on your new marriage.!! Hope the honeymoon lasts a lifetime!!
Reply
Old May 11, 2016 | 04:09 PM
  #18524  
tool and die guy's Avatar
Rotary Enthusiast
Tenured Member: 10 Years
 
Joined: Jun 2014
Posts: 923
Likes: 36
From: Lillington NC
This eBay listed from Marietta GA. Is it an OGTA guy?
Reply
Old May 11, 2016 | 04:53 PM
  #18525  
ray green's Avatar
Thread Starter
Gone
iTrader: (14)
 
Joined: Jul 2002
Posts: 11,442
Likes: 210
Never seen that SA before, looks like it has Potential however. But Cathy would not be pleased.

Paul I think Tim has the solution to your transmission fluid problem, you just need to get out there with a pressure washer:



Mr. Nix, that SA is looking very good, we can't wait to see it up here in Buford (along with Paul's SE)

Reply



All times are GMT -5. The time now is 06:58 PM.