SE RX-7 Forum Serving the Carolina's, Georgia, Florida, Alabama, and Tennessee.
Sponsored by:

Old guys with 12As club meeting

Thread Tools
 
Search this Thread
 
Old Mar 24, 2008 | 09:14 PM
  #1026  
dbragg's Avatar
Say hello to Mr.Wankel
Tenured Member 05 Years
iTrader: (7)
 
Joined: Nov 2004
Posts: 5,962
Likes: 1
From: Cartersville, Ga
yes ray, ill be there. come hell or high water. as long as i have brakes and dont blow the motor, we will be there. my girlfriend may even make a late entrance.

yes, itll be april 1st, and yes itll be my 21st birthday!!
Reply
Old Mar 24, 2008 | 09:25 PM
  #1027  
BrettLinton7's Avatar
Lots of rotors
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (34)
 
Joined: Jan 2006
Posts: 3,402
Likes: 75
From: North GA
I'd settle for those 3 Austin. I can get some crappy tires put on 2 of them and have temporaries when I trash the tires on the rear now. Any chance on you showing up to the April 1st meet?

And Crit, if you could grab one of those phonedials, I could buy it off you at the next meet. Then with the 3 from Austin I'd have a complete spare set.

And Ray, where the heck in NC did we go to? 4 People have asked me and all I can think of is Asheville...
Reply
Old Mar 25, 2008 | 05:57 AM
  #1028  
ray green's Avatar
Thread Starter
Gone
iTrader: (14)
 
Joined: Jul 2002
Posts: 11,442
Likes: 210
That's terrific Donny, you won't be embarrassed if we sing Happy Birthday for you, will you?

Brett that part of NC is called The Sticks.
Reply
Old Mar 25, 2008 | 08:29 AM
  #1029  
t_g_farrell's Avatar
Waffles - hmmm good
Tenured Member: 20 Years
Community Favorite
iTrader: (1)
 
Joined: Jul 2004
Posts: 9,250
Likes: 464
From: Lake Wylie, N.C.
You have ~3k views and/or ~300 posts to catch up and we're not standin' still

Maybe I should stop posting and viewing here, I'm helping the competition. Oh well, can't help it.
Reply
Old Mar 25, 2008 | 10:47 AM
  #1030  
dbragg's Avatar
Say hello to Mr.Wankel
Tenured Member 05 Years
iTrader: (7)
 
Joined: Nov 2004
Posts: 5,962
Likes: 1
From: Cartersville, Ga
cant say that would be needed. maybe you could just buy me a beer.
Reply
Old Mar 25, 2008 | 02:14 PM
  #1031  
Kalifornia087's Avatar
Shoot the Gap
Tenured Member 15 Years
iTrader: (1)
 
Joined: Jan 2006
Posts: 258
Likes: 0
From: Hell County
Yeah i should be able to spare the phone dials if you want em.

CRIT: So that thing has 5 lug on the front? How much is it to get that stuff from that car at the PAP?? I need and has the money!

I should be at the meet on the 1st. It'll be my first meet to.
Reply
Old Mar 25, 2008 | 05:58 PM
  #1032  
ray green's Avatar
Thread Starter
Gone
iTrader: (14)
 
Joined: Jul 2002
Posts: 11,442
Likes: 210
Tim don't worry we will never catch up with the crossroads club. Help us out and keep on posting your good stuff, Georgia high tech corridors, altered alternators and stuff like that.

It will be good to see the new folks and new cars at the April 1st OGTA!

In the mean time, looks like Stu is up to his old tricks:



Last edited by ray green; Mar 25, 2008 at 06:06 PM.
Reply
Old Mar 25, 2008 | 09:47 PM
  #1033  
freebirthtoade's Avatar
rotorhead
Tenured Member: 15 Years
 
Joined: Jun 2006
Posts: 30
Likes: 0
From: Kennesaw, GA
Howdy,

Count 1 more for Tuesday. I'll be there with my SA. I'm going to pick it up on Thursday from Marietta. She's gettin a little paint (windshield trim). I'm a long time lurker who's finally got his car running correctly. Can't wait. See ya'll there.

-Andy
Reply
Old Mar 25, 2008 | 11:13 PM
  #1034  
Crit's Avatar
No distributor? No thanks
Tenured Member 15 Years
iTrader: (6)
 
Joined: Oct 2003
Posts: 3,438
Likes: 6
From: Outskirts of Road Atlanta
Austin, the hubs with calipers, rotors, and hardware would probably run about $35 each, but it takes some arguing at the counter. They always try to charge me for a loaded spindle, which it's not, but it's usually $35.

Realize too, that the rear hubs are 4-lug. There's a vert with 5-lug rears on the yard, but I can't remove them. The half-shaft nut is off, all the screws are out, and it's still hung up on a bushing insert on each side. If someone wants to have at them, they're ALMOST removed. I can only help you with the fronts on the new car, if it's still there.

If you're cool with that, let me know and I'll swing by for the hubs and phonedial later in the week. I've been getting a lot of help lately with my "GSL-SE in a box" project so I need to get my goodwill quota back up.
Reply
Old Mar 26, 2008 | 01:00 AM
  #1035  
rxtasy3's Avatar
Moderator
Tenured Member: 20 Years
iTrader: (2)
 
Joined: Jun 2002
Posts: 9,579
Likes: 290
From: Spartanburg, SC
wish i could find safe places with no chances of cops to do donuts.
Reply
Old Mar 26, 2008 | 01:09 AM
  #1036  
Crit's Avatar
No distributor? No thanks
Tenured Member 15 Years
iTrader: (6)
 
Joined: Oct 2003
Posts: 3,438
Likes: 6
From: Outskirts of Road Atlanta
Alright, Stu, let's see a nice smoky pair in a straight line.
Reply
Old Mar 26, 2008 | 05:02 PM
  #1037  
ray green's Avatar
Thread Starter
Gone
iTrader: (14)
 
Joined: Jul 2002
Posts: 11,442
Likes: 210
"Count 1 more for Tuesday. I'll be there with my SA"

Great another SA! And a posting virgin at that! Be good to see you Andy and your shiny new 7 (well the windshield trim at least, I need to see how that's done).

Michael we can so some donut contests in Jeffrey's parking lot if you want. I'm not sure my tires are ready for that but Mike will probably take you on.

Crit, I never did find that rad mount, I guess I still need to get rid of more junk before I can expect to actually find anything. Easy on Stu, he looks like he's having lots of fun.

Next OG@TA meeting in 6 days, April 1, 7:00 pm at Jeffery's in Suwanee.
Reply
Old Mar 26, 2008 | 05:54 PM
  #1038  
Jeezus's Avatar
Stu-Tron Get Yo Groove On
Tenured Member: 15 Years
iTrader: (5)
 
Joined: Nov 2006
Posts: 8,482
Likes: 31
From: Huntsville AL
Originally Posted by Crit
Alright, Stu, let's see a nice smoky pair in a straight line.
Haha, maybe if I can get someone to get good pictures


And I told Tim this... but I have a feeling he is going to drive all the way down there and no one will show... APRIL FOOLS its next week!

Drive home Tim, drive home.

Haha.
Reply
Old Mar 26, 2008 | 06:12 PM
  #1039  
Kalifornia087's Avatar
Shoot the Gap
Tenured Member 15 Years
iTrader: (1)
 
Joined: Jan 2006
Posts: 258
Likes: 0
From: Hell County
Originally Posted by Crit
Austin, the hubs with calipers, rotors, and hardware would probably run about $35 each, but it takes some arguing at the counter. They always try to charge me for a loaded spindle, which it's not, but it's usually $35.

If you're cool with that, let me know and I'll swing by for the hubs and phonedial later in the week. I've been getting a lot of help lately with my "GSL-SE in a box" project so I need to get my goodwill quota back up.
Yes i realized only the fronts are 5. That will do for now, as im kind of just getting it all ready i guess.
If you can get everything for the fronts for 70 (i guess 35 a side), and you have the Time to do so, please do as i will make it worth while! And i'll have to owe you one in the goodwill department lol.

I may not be there in my car depending on exactly what happened today after work (see: Small fire).
No damage was done, but where the wires go into the secondaries it started a small fire, but if i disconnect it, the fire stops and the car simply smokes like a train.
I'll make the meet either way, but might be in something other than my FC

Damn i love these cars.
Reply
Old Mar 26, 2008 | 06:15 PM
  #1040  
rxtasy3's Avatar
Moderator
Tenured Member: 20 Years
iTrader: (2)
 
Joined: Jun 2002
Posts: 9,579
Likes: 290
From: Spartanburg, SC
sorry ray, i'll be at the def leppard concert in g'ville on the 1st.
Reply
Old Mar 26, 2008 | 07:20 PM
  #1041  
ray green's Avatar
Thread Starter
Gone
iTrader: (14)
 
Joined: Jul 2002
Posts: 11,442
Likes: 210
Stu's 12A injury, not enough for him to give up on 12As:

http://www.youtube.com/watch?v=WccKTQd856U
Reply
Old Mar 26, 2008 | 08:27 PM
  #1042  
Jeezus's Avatar
Stu-Tron Get Yo Groove On
Tenured Member: 15 Years
iTrader: (5)
 
Joined: Nov 2006
Posts: 8,482
Likes: 31
From: Huntsville AL
If you look closely behind the box, that big dark shape?


One of your old 12a's prepped for dissassembly. I am keeping one together. Call me paranoid :P
Reply
Old Mar 26, 2008 | 08:28 PM
  #1043  
Jeezus's Avatar
Stu-Tron Get Yo Groove On
Tenured Member: 15 Years
iTrader: (5)
 
Joined: Nov 2006
Posts: 8,482
Likes: 31
From: Huntsville AL
I am going to see if I can swing down for a meet in May. I know for a fact they will not let me out this soon for the 1st
Reply
Old Mar 26, 2008 | 10:05 PM
  #1044  
cletus's Avatar
Rotary Enthusiast
Tenured Member 15 Years
 
Joined: Dec 2001
Posts: 918
Likes: 0
From: Atlanta
I'm planning on being there. Not sure in what at this point in time though.
Reply
Old Mar 27, 2008 | 07:13 PM
  #1045  
ray green's Avatar
Thread Starter
Gone
iTrader: (14)
 
Joined: Jul 2002
Posts: 11,442
Likes: 210
FB's = 1 12A
SA's = 1.5 12As
<RX-7s = 2 12As or better
FC's = 1/2 12A
FD's = 1/3 12A
Reply
Old Mar 28, 2008 | 11:46 PM
  #1046  
BrettLinton7's Avatar
Lots of rotors
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (34)
 
Joined: Jan 2006
Posts: 3,402
Likes: 75
From: North GA
I dont think I'll be able to make it guys. Well I might, but I'm not entirely sure.

I want to buy those phonedials off of Austin and show off my model FC I got in the mail yesterday, but then there's this girl I've been hanging out with recently who I'm really into, and asking her out on April fools would be the best anniversary ever . I dont know though, there's still a few days to decide.

Crit- Collin snagged a phonedial for me at PAP. So disregard that last post . Now I can finally have a set of back ups...

And Austin- could you fit those 3 wheels into whatever car you'd be driving? If I come, I'd be glad to buy them off of you. And if not, maybe I could give the money to Collin so he could get them, or maybe I could just meet you some other time. Whatever you want, no rush.

Now... off to post in the Mountain Thread...
Reply
Old Mar 29, 2008 | 12:32 AM
  #1047  
BrettLinton7's Avatar
Lots of rotors
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (34)
 
Joined: Jan 2006
Posts: 3,402
Likes: 75
From: North GA
Here we go... uploaded a pic

Reply
Old Mar 29, 2008 | 08:54 AM
  #1048  
Crit's Avatar
No distributor? No thanks
Tenured Member 15 Years
iTrader: (6)
 
Joined: Oct 2003
Posts: 3,438
Likes: 6
From: Outskirts of Road Atlanta
Too late, man. Collin got the left-rear. I pulled the left right for you. In the meantime, someone ran off with my tool bag, so I have absolutely no metric wrenches or sockets here at the house. Off to Sears to drop $230. Karma can kiss my rosy ***.

The phonedial wasn't but $14, but I told you I'd get it and did. It'll be at the meet on Tuesday. I don't need a phonedial, so someone can pick it up for you, or it'll be in the dumpster.
Reply
Old Mar 29, 2008 | 10:42 AM
  #1049  
BrettLinton7's Avatar
Lots of rotors
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (34)
 
Joined: Jan 2006
Posts: 3,402
Likes: 75
From: North GA
Originally Posted by Crit
Too late, man. Collin got the left-rear. I pulled the left right for you. In the meantime, someone ran off with my tool bag, so I have absolutely no metric wrenches or sockets here at the house. Off to Sears to drop $230. Karma can kiss my rosy ***.

The phonedial wasn't but $14, but I told you I'd get it and did. It'll be at the meet on Tuesday. I don't need a phonedial, so someone can pick it up for you, or it'll be in the dumpster.
They just casually grabbed it and walked? That sucks... And sorry I didn't get back to the thread sooner once I found out Collin got the wheel for me. He picked it up Thursday and I didn't have time to get to the computer until last night. I guess I can still buy it off of you though, because an extra spare would be nice to have. If I dont come, I'll get Collin to buy it and I can just get it from him later. Thank you though
Reply
Old Mar 30, 2008 | 05:25 PM
  #1050  
cletus's Avatar
Rotary Enthusiast
Tenured Member 15 Years
 
Joined: Dec 2001
Posts: 918
Likes: 0
From: Atlanta
Welp, the FB will not be there because I'm an idiot. Was jacking up the front so I could work on an exhaust leak, 15 seconds of work total. Jack slipped and crushed my oil cooler. Messed up my new radiator too, but nothing big. Nothing is leaking surprisingly, but still. I'm $@#$ng pissed (at myself).

Anyone got a 1st gen air/oil cooler for sale?
Reply



All times are GMT -5. The time now is 06:31 PM.