Acesanugal

iTrader: (5)

"Maxine" is fixed.. Or so it seems. I loaned a cooling system pressure tester from Autozone and an adapter which I had to modify to make work (Sort of an oxymoron...) and quickly found my leak. It was a three inch line on the back of the UIM. Now, normally, you might be able to get at it.. Right? Wrong. -- I had to remove the throttle body, a shedload of emissions equipment, most of the wiring harness, etc to get the UIM off the motor and it was STILL a pain to get to this crappy little thing. Unfortunately, Autozone didn't have a molded hose close enough to my application, so Regina (Mah middle-aged homegurl) shoved some freebies in my jacket pocket and sent me on my way. I actually cut the line a little longer than what I needed to reduce the amount of kink I'd get, but it was of no use. With the UIM back on, there's a nice kink in the line probably rendering it completely useless. However I think it's only purpose (And I haven't verified this yet because the Nissan forums and Maxima forums aren't as well stocked as our dear 7club) is to keep part of the throttle body or something similar from freezing.

After I got it all back together, I took her for a nice drive up to Commerce..stopped at my store, went to wally-world... temp behaved perfectly, my heater works again, and I am loving my new sensible sedan. Good old girl!

ray green

iTrader: (14)

Enough with the Maxi Pad adds Collin, where's the rotary love? What's happening, you getting old?

BrettLinton7

iTrader: (33)

Check this out: http://www.rotary13b1.com/p/1219/13-BEE---T-Shirt.html


I'd wear that all the time! Ray, you should talk to the guy and get a 12A one going

And, I'm back from Valdosta. I went down there Friday and hung out with some old friends for V-day. It was a nice, much needed mini vacation!

rxtasy3

iTrader: (2)

kool shirt. i've got one of their rotor key chains, the one that goes around in the housing, as a thank you yrs ago when i informed him of a site i had made and put a link on it to his site.

u guys see the carbs i got? i started a thread on it.

Acesanugal

iTrader: (5)

Brett, you should come down to campus on Tuesday! lol

project 88 gxl

iTrader: (19)

ok guys, a good friend of mine is finally opening his business and i thought i'd put a word out for him. he's having a huge sale at his place up by the mall of ga this coming saturday. i know it' kind of short notice, but i also know that most of you guys don't pan far ahead, so you should be able to show up and support a fellow rotary enthusiast who is starting his dream business. anyway, here's a "cut and paste" from his website, (RXZotic.com) talking about the sale on saturday, so i'll just let you read about it here. check out his site if you get a chance. he's still working on it and there's new stuff everyday.






Location:
1402 Overlook Park Lane Lawrenceville, GA 30043

Map: Coming Soon

Directions: Coming Soon

Hours: 7:30am - 4:30pm

Contact:
For information, directions, etc... send e-mail to dh1@RXZotic.com

Event details:

This new venture (RXZotic.com) is a home based business for myself with my wife helping me. As such, we are beginning out of our garage, which is where the event will be taking place.

At 7:30 we will be opening up for the early birds to meet, greet, and start buying.

Here are pictures of some of the parts we will be selling.


Special Sale

Better bring your wallet filled with all the money you can earn, save, beg, and borrow!

Why, you ask?

We will be selling a total of 30 12a & 13b plates, rotors, housings, e-shafts, etc... for a ridiculously low special sale price that will be announced on the morning of the sale. This is a first come first serve only sale.

In addition there will be 100's of other special hard to find engine parts available for purchase from rx2, rx3, rx7FB, rx7FC, & Repu.

rxtasy3

iTrader: (2)

so what's his dream business, selling parts?

iheartthewankel

^ I think it's selling parts out of his garage

project 88 gxl

iTrader: (19)

no. he's selling all these parts for some capital to get his custom fabrication business started.

85_rx7_12a

aww i need another 1st gen

ray green

iTrader: (14)

The only car to have Michael, in my opinion

85_rx7_12a

ok then ray gimme

lx_machado

iTrader: (13)

someone save it!!!!

http://greenville.craigslist.org/cto/1588858936.html

if i wasnt looking for a first gen i would so buy it.

85_rx7_12a

ahhh crit save it

rxtasy3

iTrader: (2)

that's been up for sale for quite some time. i even looked at it awhile back. core support has been cut to fit a ford radiator when the v8 was put in it.

Crit

iTrader: (6)

I'll buy him a new Gatornet, though, and trade for that tailgate!

bwaits

iTrader: (12)

I have an extra REPU core support that could be used to fix that.

-billy

lx_machado

iTrader: (13)

what else was wrong with it? why didnt you buy it?

85_rx7_12a

see billy you can fix it make it better

BrettLinton7

iTrader: (33)

Tada!



I swear, I've had 4 deals on a good white hood fall through... One day. A bumper and passenger fender would be nice, too, but a hood would make a huge difference.

iheartthewankel

http://forums.maxima.org/

rxtasy3

iTrader: (2)

at the time i didn't have the money and too much trouble for me to change everything back and i don't want something someone else has cut up and i'm still holding out for another rx3/808.

lx_machado

iTrader: (13)

cool, just wondering. i was actually going to go look at it this week. the body looks decent.

ray green

iTrader: (14)

Looking good Brett! And now I know what to get you for Christmas next year!

project 88 gxl

iTrader: (19)

i would love to have that repu. too bad i cant think of anything good to trade him.