Kim

Im in the process of scanning and converting the Factory Competetion Preparation Manual, (say that out loud fast five times) , into a .PDF manual for you guys.

To my disbelief, I noticed that page 25 is missing...
If any of yu guys have it, would you please send it my way.

Thanks in advance
-Kim

speedturn

iTrader: (1)

What year was your factory manual published?

Kim

Funny enough, it says "copy-something 1980 "

Kim

Here you go:

Right click - Save as
http://www.wankelkim.net/rx7/comp.manual.pdf

Zyrano

i was curious to see what this is, but i can't open it...

Alvin

Kim

Get Adobe Reader

Kim

Ha ok I guess i was wrong, Its page 26 that i am missing.

Zyrano

i have the reader, it said file corrupted...

Kim

Mkay thats wierd, i dont have any problems viewing it.
Do you have the latest version Adobe reader?

cpa7man

iTrader: (2)

Thanks a lot!

Hyper4mance2k

iTrader: (40)

sssssuuuuwwwwwweeeeeeeeeeeet

thanx!!!

banzaitoyota

still need pg 25?

Carl Byck

Opens fine for me. I am looking for a guide to Chassis lightening for the S4. Being a unibody, I am unsure what can be removed. I am refering to cutting away parts of the chassis beyond the usual doors, glass, dash etc. Being a Turbo, my car is a tank at ~2900 wet. I have not done the usual lightening, but plan on going at it this winter. My car is probably heavier than when I started due to cage, turbo, exhaust, and fuel system. Any help appreciated. I know there are a thousansd threads, I'd just feel better about something from Mazda, considering I am putting some pretty high loads on the chassis. Carl

C. Ludwig

iTrader: (27)

Carl is that weight with driver?

Kim

No, but 26 would be nice, my bad

wankelkim@netscape.net

Thanks

Zyrano

well, i guess it's just me, i'll try it on another computer then... Thanks!

Alvin

Carl Byck

Yes(150lbs), and 20 gallons of fuel. All I have done to lighten is remove carpet, tar, and front bumper support(to fit FMIC). My turbo system and fuel system are very heavy, and my body work adds weight compared to stock. I am going to start a seperate thread, since this is mainly for the FB boys. I should have talked to Downing at SS8 when I had the chance. In a nut shell expect the lightening of the car to be as radical as safety, and chassis integrity allows. My goal is to drop 200lbs, my dream is to drop 400, but I do not think I can get that done do to being turbo. Carl

Alpine

is there a cp manual for fd or fc?

Rx7carl

I love you man! I wonder how many of those parts are still availible?

Speed Raycer

Hmmm... cant seem to DL it... Forbidden Access....

Kim

hehe guess my site has too much traffic(1gbtraffic), thats a first, sorry guys

wrxracer55

iTrader: (3)

I got the forbidden message also. Any other way to get to it?

RussTypeS

iTrader: (3)

I posted it on my site, this version is still missing page 26...

http://russfilez.com/docs/comp.manual.pdf

wrxracer55

iTrader: (3)

thanks

christaylor

Kim -- if you ever make it to the states, I owe you a beer.

Hell, given what I've learned just reading the first 5 pages I may owe you a ride in a racecar!