Tegheim - Home made 4 Rotor Wolvo project
#602
Senior Member
Thread Starter
Finished the lower brackets for the Coilovers.
Have changed my Cad a little. Moved the bracket 50mm to the center of the car, to gain 61.5° angle on the coil at rideheight, and 66.0° angle at full bump.
This is what it looked lite before the change.
Have changed my Cad a little. Moved the bracket 50mm to the center of the car, to gain 61.5° angle on the coil at rideheight, and 66.0° angle at full bump.
This is what it looked lite before the change.
#611
Senior Member
Thread Starter
In the CAD as you see it, I have 0° camber in rideheight.
I will start within between 0 to -3° camber. But it's easier to draw with zero.
Hope I answered you question right?
#613
Senior Member
Thread Starter
#616
Senior Member
Thread Starter
#617
Senior Member
Thread Starter
I did some stabilizer bar knifes a while ago.
I am also satified with the IFS now. This will give me som adjustments and will be good at both road and hopefully track.
Today I worked a little in the CNC.
Turned out pretty good.
I am also satified with the IFS now. This will give me som adjustments and will be good at both road and hopefully track.
Today I worked a little in the CNC.
Turned out pretty good.
#619
Senior Member
Thread Starter
#623
Senior Member
Thread Starter
Well, I have a "friend" here in sweden that have CNC'd the molding-plug for new fenders for his Cossie
I'd like to do the same some day
http://www.carboncossie.com/
I'd like to do the same some day
http://www.carboncossie.com/
#624
Senior Member