Mountain RX-7 Forum Serving Montana, Wyoming, Utah, Colorado, and New Mexico

Ongoing New Mexico thread

Thread Tools
 
Search this Thread
 
Old Mar 19, 2012 | 10:15 AM
  #976  
eastreetmotorsports's Avatar
Rolln Z's, FD's & MKIII's
Tenured Member 05 Years
 
Joined: Sep 2008
Posts: 247
Likes: 0
From: Albuquerque, NM
Originally Posted by Justin1992
Down off of tramway a bit past paseo del norte
Ok I love that drive both on car and on a motorcycle.....just open up a go.....hummm(tear)
Reply
Old Mar 19, 2012 | 05:36 PM
  #977  
xShiFTx's Avatar
zoom zoom
iTrader: (5)
 
Joined: Aug 2009
Posts: 136
Likes: 0
From: Abq, NM
The 1st points event of the autocross season is Saturday March 24th at UNM's G-Lot! Pre-registration closes on Wednesday (I think).

Here is the link to the schedule
http://rgrscca.com/schedule.htm

Hope some of you guys can make it out there, the weather is looking to be really nice!
Reply
Old Mar 20, 2012 | 08:16 AM
  #978  
DamianSoul's Avatar
The Choopster
Tenured Member 15 Years
iTrader: (4)
 
Joined: May 2004
Posts: 447
Likes: 0
From: Albuquerque, NM
I'm not going to make it to this event. I've got a massive project due next week so all my time is being dumped into that. Stephen and I are shooting for Farmington.

Originally Posted by xShiFTx
The 1st points event of the autocross season is Saturday March 24th at UNM's G-Lot! Pre-registration closes on Wednesday (I think).

Here is the link to the schedule
http://rgrscca.com/schedule.htm

Hope some of you guys can make it out there, the weather is looking to be really nice!
Reply
Old Mar 20, 2012 | 10:34 AM
  #979  
eastreetmotorsports's Avatar
Rolln Z's, FD's & MKIII's
Tenured Member 05 Years
 
Joined: Sep 2008
Posts: 247
Likes: 0
From: Albuquerque, NM
Originally Posted by DamianSoul
I'm not going to make it to this event. I've got a massive project due next week so all my time is being dumped into that. Stephen and I are shooting for Farmington.
I would go but I planned to run at sandia motorsports for the drivers club. Maybe ill stop by for the evening runs...good luck though!!
Reply
Old Mar 21, 2012 | 01:45 AM
  #980  
brian_skotch's Avatar
Rotary Enthusiast
Tenured Member: 15 Years
Liked
Loved
iTrader: (7)
 
Joined: Dec 2008
Posts: 987
Likes: 31
From: ABQ, NM
Originally Posted by lh6601
Hot doggin'! Man I miss doing that. Just ain't the same in the DD honda
No worries bro! Soon you'll be boosting the fd!
Reply
Old Mar 21, 2012 | 08:27 AM
  #981  
Len-Len's Avatar
Lenny
Tenured Member 05 Years
iTrader: (9)
 
Joined: Mar 2010
Posts: 472
Likes: 2
From: Albuquerque
The FD threw up!



Thanks Crazydevil
Reply
Old Mar 21, 2012 | 12:59 PM
  #982  
eastreetmotorsports's Avatar
Rolln Z's, FD's & MKIII's
Tenured Member 05 Years
 
Joined: Sep 2008
Posts: 247
Likes: 0
From: Albuquerque, NM
Originally Posted by lh6601
The FD threw up!



Thanks Crazydevil
If you dont want your coilovers and that front bumper ill take em
Reply
Old Mar 22, 2012 | 01:22 AM
  #983  
Len-Len's Avatar
Lenny
Tenured Member 05 Years
iTrader: (9)
 
Joined: Mar 2010
Posts: 472
Likes: 2
From: Albuquerque
^Lol I just bought both those things! I'll give you a holla if I decide to change my setup boss.
Reply
Old Mar 22, 2012 | 09:11 AM
  #984  
eastreetmotorsports's Avatar
Rolln Z's, FD's & MKIII's
Tenured Member 05 Years
 
Joined: Sep 2008
Posts: 247
Likes: 0
From: Albuquerque, NM
Originally Posted by lh6601
^Lol I just bought both those things! I'll give you a holla if I decide to change my setup boss.
Lol np doesnt hurt to ask
Reply
Old Mar 24, 2012 | 11:53 PM
  #985  
Twins80s's Avatar
I
Tenured Member 05 Years
iTrader: (3)
 
Joined: Nov 2007
Posts: 1,063
Likes: 0
From: at home
Originally Posted by Justin1992
sweet driving bro!
Reply
Old Mar 27, 2012 | 04:48 AM
  #986  
rotabimmer77's Avatar
Full Member
 
Joined: Aug 2009
Posts: 79
Likes: 0
From: Albuquerque NM
NM Just picked this little Beauty up!

Hey guys, just picked up an 85 GS 7 for 500! It needs just a few little things to get her going, has rebuilt motor with roughly 2000 miles on it and had been sitting since 04. I lubricated the Apex seals, and added some oil, coolant, and just a tiny bit of fuel since the tank had be previously drained and clean before I got it and it didn't wanna start. So I splashed some in the carb and it ran for about 10 seconds and cut off. So i found out that I need a new fuel pump. It also needs a slave cylinder and a left rear glass and front fender and bumper. Other than pretty straight and clean. If anybody would like to come and help me get this car back the way it should be please let me know as this is the first rotary that I have owned! But let me know what you guys think!!

Reply
Old Mar 27, 2012 | 09:28 AM
  #987  
eastreetmotorsports's Avatar
Rolln Z's, FD's & MKIII's
Tenured Member 05 Years
 
Joined: Sep 2008
Posts: 247
Likes: 0
From: Albuquerque, NM
Originally Posted by rotabimmer77
Hey guys, just picked up an 85 GS 7 for 500! It needs just a few little things to get her going, has rebuilt motor with roughly 2000 miles on it and had been sitting since 04. I lubricated the Apex seals, and added some oil, coolant, and just a tiny bit of fuel since the tank had be previously drained and clean before I got it and it didn't wanna start. So I splashed some in the carb and it ran for about 10 seconds and cut off. So i found out that I need a new fuel pump. It also needs a slave cylinder and a left rear glass and front fender and bumper. Other than pretty straight and clean. If anybody would like to come and help me get this car back the way it should be please let me know as this is the first rotary that I have owned! But let me know what you guys think!!

I remember my first fb rx7.....memories hummm

Congrats man! Looks like shes in good shape.....i would get with Sean (rxonfire) to help he's the rx man to know
Reply
Old Mar 27, 2012 | 11:07 PM
  #988  
rotabimmer77's Avatar
Full Member
 
Joined: Aug 2009
Posts: 79
Likes: 0
From: Albuquerque NM
Yeah I already pm'd him about the fuel pump and slave, hasn't got back to me yet. I could really use some help with her to since I've never owned an RX7.
Reply
Old Mar 29, 2012 | 12:37 AM
  #989  
Crazydevil's Avatar
WELCOME TO MY CRAZY WORLD
Tenured Member 10 Years
iTrader: (1)
 
Joined: Sep 2003
Posts: 209
Likes: 0
From: Los Lunas, NM
Nice car man, like the color too. I would hit the junkyard and see if you can't find a gsl se rear end. I know last time I was there they had a couple but I don't remember what models. Anyway good luck with the car.
Reply
Old Mar 29, 2012 | 12:16 PM
  #990  
Crazydevil's Avatar
WELCOME TO MY CRAZY WORLD
Tenured Member 10 Years
iTrader: (1)
 
Joined: Sep 2003
Posts: 209
Likes: 0
From: Los Lunas, NM
Hey guys anyone know a shop that can rebuild a heater core. I have called around but nobody picks up a phone now days.
Reply
Old Mar 29, 2012 | 09:37 PM
  #991  
rotabimmer77's Avatar
Full Member
 
Joined: Aug 2009
Posts: 79
Likes: 0
From: Albuquerque NM
Originally Posted by Crazydevil
Nice car man, like the color too. I would hit the junkyard and see if you can't find a gsl se rear end. I know last time I was there they had a couple but I don't remember what models. Anyway good luck with the car.
thanks man means alot. I'm probably gonna paint it white though lol. I've been wanting to hit up the yard but haven't got the funds right now for anything. I wanna drift it so I will need that rear end. But I wanna get some sportmax (xxr) 002 wheels for it eventually but i guess they don't fit... what do I need to do to convert them to at least a 4x100 pattern?
Reply
Old Mar 30, 2012 | 12:09 AM
  #992  
Crazydevil's Avatar
WELCOME TO MY CRAZY WORLD
Tenured Member 10 Years
iTrader: (1)
 
Joined: Sep 2003
Posts: 209
Likes: 0
From: Los Lunas, NM
Switch to a gslse front and back. Bolt pattern is 4x114.3
Reply
Old Mar 30, 2012 | 02:22 AM
  #993  
rotabimmer77's Avatar
Full Member
 
Joined: Aug 2009
Posts: 79
Likes: 0
From: Albuquerque NM
Originally Posted by Crazydevil
Switch to a gslse front and back. Bolt pattern is 4x114.3
Is it as simple as it sounds? Is it interchangeable or do I need to do some extra stuff to get them to fit??
Reply
Old Mar 30, 2012 | 10:59 AM
  #994  
Hayseed7's Avatar
Banned. I got OWNED!!!
iTrader: (2)
 
Joined: Dec 2011
Posts: 156
Likes: 0
From: Albuquerque
I'm pretty sure xxr dual drills all their wheels so if they are 4x100 they are also 4x114. I say that because Jeff osbornes has them and they fit his 4x114 s13
Reply
Old Mar 30, 2012 | 01:16 PM
  #995  
rotabimmer77's Avatar
Full Member
 
Joined: Aug 2009
Posts: 79
Likes: 0
From: Albuquerque NM
Originally Posted by Hayseed7
I'm pretty sure xxr dual drills all their wheels so if they are 4x100 they are also 4x114. I say that because Jeff osbornes has them and they fit his 4x114 s13
Yeah I know that the xxr's would fit if I had x100 or x114.3, I was wondering is the GSL-SE Front and Rears would just bolt up in place of my GS stuff?
Reply
Old Mar 30, 2012 | 09:08 PM
  #996  
Crazydevil's Avatar
WELCOME TO MY CRAZY WORLD
Tenured Member 10 Years
iTrader: (1)
 
Joined: Sep 2003
Posts: 209
Likes: 0
From: Los Lunas, NM
Not sure about the swap but I know it's all on the 1st gen section. Do some research. Should be easy to find.
Reply
Old Mar 31, 2012 | 08:17 PM
  #997  
vcs2340's Avatar
workin on it.
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Nov 2004
Posts: 115
Likes: 0
From: durango
Steven/Phil, is it possible for me to keep the same number for my car as last yr? I got my new membership card, but I cant remember how to select my car number. If u guys could remind me how to pick my number that would b awesome.
Thanks guys,
Spencer
Reply
Old Mar 31, 2012 | 11:34 PM
  #998  
DamianSoul's Avatar
The Choopster
Tenured Member 15 Years
iTrader: (4)
 
Joined: May 2004
Posts: 447
Likes: 0
From: Albuquerque, NM
Originally Posted by vcs2340
Steven/Phil, is it possible for me to keep the same number for my car as last yr? I got my new membership card, but I cant remember how to select my car number. If u guys could remind me how to pick my number that would b awesome.
Thanks guys,
Spencer
That's a good question. Donour has been responsible for handling class numbers for the past few years, but he moved away last year. For now it's safe to assume you can run last years numbers, but I can post the question on the RGR discussion list to see if anyone knows how to handle this.
Reply
Old Apr 2, 2012 | 03:16 PM
  #999  
xShiFTx's Avatar
zoom zoom
iTrader: (5)
 
Joined: Aug 2009
Posts: 136
Likes: 0
From: Abq, NM
Spencer, Phil - are you guys racing in Farminton on April 21/22?
Reply
Old Apr 3, 2012 | 08:30 AM
  #1000  
DamianSoul's Avatar
The Choopster
Tenured Member 15 Years
iTrader: (4)
 
Joined: May 2004
Posts: 447
Likes: 0
From: Albuquerque, NM
Originally Posted by vcs2340
If u guys could remind me how to pick my number that would b awesome.
Donour is managing the number list this year until the region can come up with a long term solution. If you have his email address you can send him your requested number directly, or you can let me know and I'll send him an email. I can't remember what your number was last year.



Originally Posted by xShiFTx
Spencer, Phil - are you guys racing in Farminton on April 21/22?
Stephen and I are planning on going to the Saturday event. I'd like to make the Sunday event as well, but that will depend on any school assignments I have going on.
Reply



All times are GMT -5. The time now is 04:04 AM.