tell them to huury and put some damn paint....LOL!!!

man how long into the project??

 

i love this project... so much cool stuffs... overload

 

4-17-2008:
<object width="425" height="350"> <param name="movie" value="http://www.youtube.com/v/3vUnnI_as_k"> </param> <embed src="http://www.youtube.com/v/3vUnnI_as_k" type="application/x-shockwave-flash" width="425" height="350"> </embed> </object>

Due to me always adding more work to the list of things for the body shop to do the car had not been moved back to the paint area yet as of yesterday.

However, as you can see from the video things are moving and moving pretty fast.

In the video you can see the Tamon Design spoiler mounted to the 2nd trunk lid. I'm going to be brutally honest about this piece. This spoiler fit like absolute ****. After removing the badges from the trunk and trying to fit the spoiler we found a monster gap in the area corner where the spoiler is supposed to be contoured like the trunk lid. The ends had to basically be built up with more FG to fill that huge gap. The gap was large enough to stick you finger under the sides of the spoiler! My body guy asked me multiple times over the last few weeks if I was sure that this spoiler was actually for this car. We also found the mounting solution that Tamon had provided to be a bit ghetto. 2 long strips of double sided tape and 4 screws(or Rivets) one at each corner of the spoiler. The tape comes pre-attached to the spoiler no other hardware is provided. Tamon does include 2 pieces of Carbon Fiber that I believe are to be attached to the corners of the spoiler as they have a contour similar to the wing where it mounts to the trunk. They do not fit the actual contour of the trunk lid though. They could probably be shaved down to fit. They have 3 studs in them with nuts. I will take pics of them to show what they are and how the spoiler originally fit with the trunk lid. As of now I am probably not going to use the carbon bits. No picture of Tamon's spoilers online have ever showed these pieces. Anyway, we decided to not use Tamon's mounting solution. Instead, the 4 holes for the screws\rivets have been filled in and inside the spoiler bolts have been installed that go through the trunk lid so it can be secured with a nut. We will use those probably in combination with the double sided tape for a much cleaner install with no visible hardware.

The RB spoiler has been repaired and the antenna hole in the spoiler has been filled and shaved. The studs in the pedestals had been broken off prior to me getting it. The pedestals have been repaired and new studs have been installed along with new rubber gaskets. The video shows the final finishing material being sanded down from the spoiler. Stock emblems have been deleted from the trunk the RB spoiler will be mounted on.

Finally in the last part of the video you can see the Pan Speed hood sanded down ready for the final finishing material is added then sanded down.

More to come very soon!

 

awesome

 

4-18-2008:
<object height="350" width="425">
<embed src="http://www.youtube.com/v/EjNMKcVsdhE" type="application/x-shockwave-flash" height="350" width="425"> </object>

Here you see the indentation for the Tamon Badge filled in. Also, in this video you can see the awesome job they did installing the bolts into the RB spoiler. I almost had forgotten I had a set of tow hooks to install and that taking them to the body shop to trim the bumpers for them would probably be a good idea. So, here you can see the rear hook. The front hook will be on the driver side. It hasn't been put on yet.

OK, now those CF Tamon Spoiler side plates I had mentioned before. Heres a couple pics of one of them:


Theres a piece of blue plastic over the CF that peels off. When I first got my spoiler and found these in the box I was a bit perplexed. I had not seen them in any Tamon pics, but from looking at them it was quite obvious where they were supposed to go. It looks like your supposed to drill 2 holes into the side of the Tamon spoiler and mount these to the sides.

Heres how they fit against the trunk:



That is basically how the spoiler itself fit against the trunk.

And fitment against the fitted spoiler:
<object height="350" width="425">
<embed src="http://www.youtube.com/v/2GcHX-153Ys" type="application/x-shockwave-flash" height="350" width="425"> </object>


Here are a few pics of the built up sides of the Tamon spoiler with the new mounting solution. You can also see the double sided tape that Tamon includes.





That side wall was originally about 1/8 inch thick and the spoiler was quite flimsy, this has added a little weight obviously but the spoiler is much more sturdy.







The car has been rolled into the next section of the body shop. So everything should be getting primer next week, we might even see some paint.

 

whtas the wing supposed to look like?

 

The Tamon Design duckbill is supposed to look like this:

 

verty nice makes me want to go widebody and do my bodywork again for giggles

bro you think you will have it done before sevenstock, if so should try and make it you will definatly win this years trophy for 2nd gens

 

I'm hoping to have the car done long before sevenstock. I'd love to go but I'm not sure how I will be getting there.

 

Roadtrip in that 500R Vert!!!

 

hell yeah, if not tow it...taking that trophy will be well worth it

 

wow I just read through all 11 pages in this build! Looks like an awesome ride, good work. Can wait to see the finished product.

 

Yeah, thought about that. I dunno how reliable the car will be, it probably will be fine, but I need to do some extensive road testing after it is completed before I am really comfortable taking it on a cross country trip.

LoL, bro you act as if its mine already. Lets wait till the car is actually done to make that judgement. There's always good competition at 7stock, we'll see my friend. You going to 7 stock? We gotta meet up and chat.

LoL you guys kill me saying you can't wait to see the finished product... Man, I'd choke a bitch to have this thing done TODAY!

 

ahh i wish i will be officialy done living in California in july , so i wont be making that trip back , until december when my wife and i spend xmas with her parents

but definatly we will meet up one day

hell wide *** vert black on black you shouldnt be that hard to find...lol

 

I will be at SevenStock

 

**** looks so dope so far.. i cannot wait till you finish haha.. wide body is gangsta all though I don't care for the wing

are you putting a roll cage in or no?

 

I'm gonna try to get there man.

Thanks. Which wing don't you like?
I have a Kirk roll bar. I haven't put it in yet. I've been debating using that or going with a custom job.

 

just a wing in general not a big fan of them on the verts.. they look nice on the hatches though

and nice

 

Liking the RB spoiler- looks great with the lines of the widebody.
Not so much a fan of the Tamon, but it is a bit more subtle. I think the ends just look kinda chopped- but if you had tapered end pieces on the rear quarters to "wrap" the spoiler a bit, it might look too much like a Camaro...IDK.

 

I dunno, the wrap around bits would make the spoiler look more like a wangan wing. The angular look is more fitting to the car I think. I think the Tamon wing will also look MUCH better when its painted the same color as the car. It sticks out too much on that orange car. But I think it will blend in very nicely on a black FC. We'll see soon enough.

 

True enough, sir. As has been said before, can't wait to see her all done up.

 

looks like a nice build and
wow

 

4-22&23-08:
<object width="425" height="350"> <param name="movie" value="http://www.youtube.com/v/nSaS1v6XJVY"> </param> <embed src="http://www.youtube.com/v/nSaS1v6XJVY" type="application/x-shockwave-flash" width="425" height="350"> </embed> </object>


Theres a bit of stuff that needs to be done to the engine bay and a couple other areas. Right now the primary goal is to get some primer on the body parts that have been worked, to avoid contamination.

The front windshield has been popped out. The metal underneath has been taken down to bare metal so it can be repainted and resealed nicely.


Check out the paint booth\oven.

 

 

Looking real good so far juiceh. I cant wait to start working on my widebody project from just seeing all your progress. When do you think the exterior will be complete?