Where to find RE Speed style oil tube?
(PS what happened to the hatch) it should be an underlying assumption that I am aware this item was discontinued.
10-29-09, 12:03 AM
#6
Check the classifieds section? Maybe someone has a used one for sale...
Or, you could probably have one custom made pretty cheap.
I made my own, but extended it by a few inches to clear my strut tower bar.
Or, you could probably have one custom made pretty cheap.
I made my own, but extended it by a few inches to clear my strut tower bar.
Trending Topics
11-04-09, 04:53 PM
#8
Derwin
Thread Starter
iTrader: (2)
Join Date: Apr 2005
Location: MTL, QC
Posts: 2,888
Likes: 0
Received 0 Likes
on
0 Posts
Check the classifieds section? Maybe someone has a used one for sale...
Or, you could probably have one custom made pretty cheap.
I made my own, but extended it by a few inches to clear my strut tower bar.
Or, you could probably have one custom made pretty cheap.
I made my own, but extended it by a few inches to clear my strut tower bar.
I might end up doing this as Vibrant has a ton of types of weld on lids I think with materials and everything it would come back to around 100$
11-13-09, 04:53 AM
#10
Banned. I got OWNED!!!
iTrader: (10)
Join Date: Aug 2005
Location: Castle Combe UK
Posts: 230
Likes: 0
Received 0 Likes
on
0 Posts
Ours are a little more expensive, but in my opinion do a better job 
We have a baffled tank, with a breathable top, so it not only acts as a remote filler but also a catch tank.
If you would rather relocate the tank, I can send a longer piece of hose, and unmade, then you can cut to size. Heat shrink around the hose is optional at no extra cost.
£199.99 + Postage.
We have a baffled tank, with a breathable top, so it not only acts as a remote filler but also a catch tank.
If you would rather relocate the tank, I can send a longer piece of hose, and unmade, then you can cut to size. Heat shrink around the hose is optional at no extra cost.
£199.99 + Postage.
11-14-09, 09:41 AM
#13
Banned. I got OWNED!!!
iTrader: (10)
Join Date: Aug 2005
Location: Castle Combe UK
Posts: 230
Likes: 0
Received 0 Likes
on
0 Posts
Sorry you think it is expensive.
If you break down the compnents it isn't that expensive. The Goodridge hose is using 2 90 degree AN10 fittings. The mocal breathable cap is £10 :-o
the pot is a well fabricated aluminium pot with an internal baffle. We have also had our own water cut flanges with an AN10 weld on boss.
It is a complete pacakge. And as said combats not only the problem of relocating the filler neck (running a centralised LIM) but also acts as a catch tank which Mocal charge a good £100 for
If you break down the compnents it isn't that expensive. The Goodridge hose is using 2 90 degree AN10 fittings. The mocal breathable cap is £10 :-o
the pot is a well fabricated aluminium pot with an internal baffle. We have also had our own water cut flanges with an AN10 weld on boss.
It is a complete pacakge. And as said combats not only the problem of relocating the filler neck (running a centralised LIM) but also acts as a catch tank which Mocal charge a good £100 for
11-14-09, 09:44 AM
#14
Sorry you think it is expensive.
If you break down the compnents it isn't that expensive. The Goodridge hose is using 2 90 degree AN10 fittings. The mocal breathable cap is £10 :-o
the pot is a well fabricated aluminium pot with an internal baffle. We have also had our own water cut flanges with an AN10 weld on boss.
It is a complete pacakge. And as said combats not only the problem of relocating the filler neck (running a centralised LIM) but also acts as a catch tank which Mocal charge a good £100 for
If you break down the compnents it isn't that expensive. The Goodridge hose is using 2 90 degree AN10 fittings. The mocal breathable cap is £10 :-o
the pot is a well fabricated aluminium pot with an internal baffle. We have also had our own water cut flanges with an AN10 weld on boss.
It is a complete pacakge. And as said combats not only the problem of relocating the filler neck (running a centralised LIM) but also acts as a catch tank which Mocal charge a good £100 for
11-14-09, 01:59 PM
#16
Full Member
iTrader: (1)
Join Date: Feb 2007
Location: Lancashire Uk
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
I have seen one of these catch tanks in person, and whilst it is expensive, you can see where the money goes. the tank is custom built with internal baffles, and unfortuantly the AN fittings really ramp the cost up. You have to bear in mind that AtomicRex are making products for use in competition, and so are built to a spec, not a price point. This does mean that it will costs will be higher, but you are getting a very high quality product.
Thread
Thread Starter
Forum
Replies
Last Post
KAL797
Test Area 51
0
08-11-15 03:47 PM
