driFDer

iTrader: (1)

For the two middle wires, does it matter which one goes to which bottom plug? I have mine in reverse order and drove it around the block it seemed fine.

Also on a side note after I replaced my plugs and started the car up a day later I had barely any smoke. Before, there would be gobs of smoke for like 5 minutes now it smokes a little for 30 sec's. Thats one problem fixed.

zkeller

iTrader: (47)

It does not matter which order the two middle wires are in. They are the leading plug wires which come from a dual post coil,(They both fire the same in a wastespark configuration).

Fatman0203

Mind if I ask what wires you got?

GoRacer

iTrader: (2)

I beleive the two strait booted ones should be in the middle. The angled boot won't rub your oil filter.

driFDer

iTrader: (1)

K thanks exactly what I wanted to hear. For wires I just went with a set of NGK's straight of their website. Like $23, they work.

cmartinp28

looks like magnecor to me

GoRacer

iTrader: (2)

The boots look like Taylor's (maybe spiro pro's).

scotty305

iTrader: (2)

that photo is not his car, they are Taylor wires from someone else's how-to page.

http://home.covad.net/~f2racer/plugs.../plugwires.htm

-s-

GoRacer

iTrader: (2)

Too bad I didn't have that years ago when I first bought my car. The stupid dealer charged me at least an hour and still mixed up leading/trailing plugs. It is kinda funny that the after photo above shows the wires on the wrong coils when it's a how to write up. Notice the correct placement of the OEM wires from the same site below...

scotty305

iTrader: (2)

That job took me over an hour to do. Removing the throttle body takes some time if you haven't done it before. I believe the saying goes, "If you want something done right..."

-s-

JONSKI

From this thread:
https://www.rx7club.com/forum/showth...hreadid=135389