13BNUT

iTrader: (8)

Which premix are you guys using for your FD's?? Mazdatrix sells (IDEMITSU) brand anybody ever try these???
http://www.mazdatrix.com/q-supply.htm
I am using a Microtech LtX-8 and it will not control my OMP so I have to premix.

Beast From The East

I used Redline Synthetic smokeless but since I use Wolf 3D I've retained my omp (the Wolf has omp controls). I'm just now switching to the Idemitsu stuff when I go to Thunderhill next weekend.

2007 ZX-10R

I run either Idemitsu or Amsoil synthetic two stroke pre-mix ("Interceptor"), about 8 oz per fill up...I've been doing this for almost two years, OMP disconnected

Brent Dalton

iTrader: (31)

I use Idemitsu as well.

13BNUT

iTrader: (8)

sounds good to me, especially since Mazdatrix is about 3 blocks from where I live
LOL.
Thanks guys

93RedDragonFD

iTrader: (16)

Quicksilver 2-cycle Premium Outboard Oil. 1 ounce of per gallon of gas.

2007 ZX-10R

stay away from this stuff, it leaves ugly deposits...I've seen it first hand on the power valves on my waverunner

Amsoil synthetic two stroke is worlds better

RX7 RAGE

iTrader: (22)

Idemitsu here.

13BNUT

iTrader: (8)

Anybody using Royal Purple? I may be getting a partial sponsorship but how good are their products???

RE369

Protek-R (from pettit)
but probably will go Idemitsu when i finish the gallon of Protek-R

13BNUT

iTrader: (8)

http://www.royalpurple.com/2-cycle-racing-oil.html
http://www.royalpurple.com/2-cycle-oil.html


check these out

Seventh Heaven

iTrader: (1)

I also use Idemitsu.

13BNUT

iTrader: (8)

Mazdatrix recommends 1/2oz of Idemitsu oil with every gallon of fuel, what ratios are you using?

grimple1

iTrader: (1)

castrol 2-stroke premix.

2007 ZX-10R

that's what I run (no OMP, either)

it really doesn't take much oil to keep the seals lubricated, unless you are racing, 100:1 in far too rich imo

93RedDragonFD

iTrader: (16)

I never knew, this is what my friend was using and told me it was good... Where can you pick up Amsoil synthetic at? Thanks for pointing that out man.

viviorunitia88

iTrader: (9)

im useing marval mystery oil for now ordering up a case of idosmiol sry about spelling. i use 4-6 oz usealy around 5 for every tank of gas. changing once car is fully tuned

GoodfellaFD3S

iTrader: (213)

And you base this on......?

We've been through this in another thread, yzf

Here's my opinion:

when it comes to the health of motor internals, I'd rather be safe than sorry.

8 ozs for 18 gallons of gas is a 369:1 ratio. That's not even remotely close to 100:1.

I run 1 oz per gallon Idemitsu premix (164:1 ratio) *with* a working OMP, and see zero smoke out the tailpipe, with zero added smell. You wouldn't even know I premix.

I'm going to get in touch with Idemitsu, I'm fairly certain their recommendation is based on a working OMP, unless their product is way superior to 'regular' premix. Then maybe we can get an authoritative answer and cease all the speculation.

dirttracker64

Im using Protek-R

EZFD

I use 1 oz. per gallon of Amsoil HP injector 2 stroke without the MOP. After what Goodfella said about no smoke and no smell with Idemsu, i might try that, my car smells llike ****.

IEatVipers4Brkfast

Any of you guys try Klotz?
It makes the tail of a bike or quad smell awesome.
Just wondering how it would do in our cars.

Where is everyone finding Idemitsu?

empireracing

Protek-R

Kit1612

iTrader: (4)

I use Idemitsu as well. I buy them at mazdatrix.com.

zinx

iTrader: (3)

I use whatever TCW-3 is on the shelf, usually pick up a name brand over a store brand. I usually buy whatever they have on the shelf since they don't carry much.

I generally mix 1 oz to a gallon, but i'll put in more if i'm heading to the strip.

2007 ZX-10R

what I've read in the past, unfortunately I can't cite sources

I would tend to agree, but I also don't want to foul my plugs...that has happened and it sucks

actually 0.5/128 oz is 1:256

interesting, because if I've been bogging it for awhile, I see a ton of smoke come out of the tailpipe when I get on it, then it clears up...perhaps I'm running plugs that are too cold, but thery're just NGK 9s

that really is the key question

great, look forward to your follow-up post, Rich