Help Profec B install help
#1
Junior Member
Thread Starter
Join Date: Jun 2002
Location: Alburne
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
Help Profec B install help
Ok i just go my profec somewhat installed. Ok here is how i did it. I put a nipple on the pipe from my turbo to my FMIC. I have this converted to a single. KKK kit. Anyway I have a standard HKS waste gate 40MM. So i ran the hose from the nipple to the selnoids then on the out side of the selnoids i ran a hose to the adapter i put in the top of the wastegate where before there was an empty threaded hole. Ok next the line that goes into the back of the profec for the boost. I took that off from the same spot as my map sensor. After the throttle body. Is this ok. And last the connection on the side of my waste gate goes to the same nipple as the selnoids go to on the pipe from my turbo to my Intercoller. Is this right or should i not have the top hose on my wastegate. Please help. I get no higer boost when running the car than i was getting before. 5psi. PLease help
#3
Rotary Enthusiast
Join Date: Nov 2001
Location: US
Posts: 1,483
Likes: 0
Received 0 Likes
on
0 Posts
Twinturborx7pete.. aren't u that guy with Red 93 rx7? just installed Profec B at that car shop? Importauto workz.. what ever? if so.. i was there with my friend drving black celica
#5
Out of order
iTrader: (5)
Join Date: Nov 2001
Location: somewhere
Posts: 7,040
Likes: 0
Received 0 Likes
on
0 Posts
hey Pete, how do u like the sound of the N1? All i ever get is a "the N1, fartcans, and all those sound crappy." Im lookin to get an exhaust after i drop my FD off at MazdaCity next week (you can peep my 99 spec front end too, hehe).
I was thinking about the N1 with a silencer, or the Power Extreme
I was thinking about the N1 with a silencer, or the Power Extreme
#6
Out of order
iTrader: (5)
Join Date: Nov 2001
Location: somewhere
Posts: 7,040
Likes: 0
Received 0 Likes
on
0 Posts
Or possibly the N1 duals. Im not going midpipe liek you though, im stayin with a Hiflo cat. Although i like the idea of spoutin flames, i hate needed a new engine every few runs (havent met any astute tuners in the area yet)
Trending Topics
#8
Out of order
iTrader: (5)
Join Date: Nov 2001
Location: somewhere
Posts: 7,040
Likes: 0
Received 0 Likes
on
0 Posts
werd, lol. When i take my car up to Mazda City, i'll have the lip in the car, i'll drop you a PM when i take it there. That may be the easiest time to meet up Dont laugh when u see the car there though, bc theres a fender, and the front end in primer (no need to paint if i cant drive it). once i get the car out, it goes straight to Rocky's Custom Pearls for a nice paintjob.
If yer in need of paint, lemme know, he's owns the shop. I went to highschool with him, and he's only charging me for paint.
If yer in need of paint, lemme know, he's owns the shop. I went to highschool with him, and he's only charging me for paint.
Thread
Thread Starter
Forum
Replies
Last Post
24seven_dada
3rd Generation Specific (1993-2002)
20
11-10-18 12:03 PM