3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Help Profec B install help

Old Jun 25, 2002 | 01:36 PM
  #1  
kkk93rex's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Jun 2002
Posts: 30
Likes: 0
From: Alburne
Help Profec B install help

Ok i just go my profec somewhat installed. Ok here is how i did it. I put a nipple on the pipe from my turbo to my FMIC. I have this converted to a single. KKK kit. Anyway I have a standard HKS waste gate 40MM. So i ran the hose from the nipple to the selnoids then on the out side of the selnoids i ran a hose to the adapter i put in the top of the wastegate where before there was an empty threaded hole. Ok next the line that goes into the back of the profec for the boost. I took that off from the same spot as my map sensor. After the throttle body. Is this ok. And last the connection on the side of my waste gate goes to the same nipple as the selnoids go to on the pipe from my turbo to my Intercoller. Is this right or should i not have the top hose on my wastegate. Please help. I get no higer boost when running the car than i was getting before. 5psi. PLease help
Reply
Old Jun 25, 2002 | 10:47 PM
  #2  
twinturborx7pete's Avatar
Juris Doctor
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (3)
 
Joined: Mar 2002
Posts: 2,226
Likes: 228
From: Panama City Beach, Florida
look at the other profec b posts, i'm having too high of boost problems currently still, hopefully i'll have it fixed tomorrow!
Reply
Old Jun 26, 2002 | 02:11 PM
  #3  
Rotary Enthusiast
Tenured Member 20 Years
 
Joined: Nov 2001
Posts: 1,483
Likes: 0
From: US
Twinturborx7pete.. aren't u that guy with Red 93 rx7? just installed Profec B at that car shop? Importauto workz.. what ever? if so.. i was there with my friend drving black celica
Reply
Old Jun 27, 2002 | 01:09 AM
  #4  
twinturborx7pete's Avatar
Juris Doctor
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (3)
 
Joined: Mar 2002
Posts: 2,226
Likes: 228
From: Panama City Beach, Florida
yeah that was me.
Reply
Old Jun 27, 2002 | 01:21 AM
  #5  
RedR1's Avatar
Out of order
Tenured Member 15 Years
iTrader: (5)
 
Joined: Nov 2001
Posts: 7,040
Likes: 0
From: somewhere
hey Pete, how do u like the sound of the N1? All i ever get is a "the N1, fartcans, and all those sound crappy." Im lookin to get an exhaust after i drop my FD off at MazdaCity next week (you can peep my 99 spec front end too, hehe).

I was thinking about the N1 with a silencer, or the Power Extreme
Reply
Old Jun 27, 2002 | 01:23 AM
  #6  
RedR1's Avatar
Out of order
Tenured Member 15 Years
iTrader: (5)
 
Joined: Nov 2001
Posts: 7,040
Likes: 0
From: somewhere
Or possibly the N1 duals. Im not going midpipe liek you though, im stayin with a Hiflo cat. Although i like the idea of spoutin flames, i hate needed a new engine every few runs (havent met any astute tuners in the area yet)
Reply
Old Jun 27, 2002 | 01:46 AM
  #7  
twinturborx7pete's Avatar
Juris Doctor
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (3)
 
Joined: Mar 2002
Posts: 2,226
Likes: 228
From: Panama City Beach, Florida
i love my n1 exhaust ... sounds good to me... no fart noises.. just straight up screams... gimme a call sometime and i'll drive by and we can go for a ride and maybe.. jus maybe i can get that lip spoiler? lol
Reply
Old Jun 27, 2002 | 01:51 AM
  #8  
RedR1's Avatar
Out of order
Tenured Member 15 Years
iTrader: (5)
 
Joined: Nov 2001
Posts: 7,040
Likes: 0
From: somewhere
werd, lol. When i take my car up to Mazda City, i'll have the lip in the car, i'll drop you a PM when i take it there. That may be the easiest time to meet up Dont laugh when u see the car there though, bc theres a fender, and the front end in primer (no need to paint if i cant drive it). once i get the car out, it goes straight to Rocky's Custom Pearls for a nice paintjob.

If yer in need of paint, lemme know, he's owns the shop. I went to highschool with him, and he's only charging me for paint.
Reply
Old Jun 27, 2002 | 02:28 AM
  #9  
twinturborx7pete's Avatar
Juris Doctor
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (3)
 
Joined: Mar 2002
Posts: 2,226
Likes: 228
From: Panama City Beach, Florida
ok well just let me know.. i'll need paint on my car in prolly a year or so.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
24seven_dada
3rd Generation Specific (1993-2002)
20
Nov 10, 2018 12:03 PM
sinclair7seven
General Rotary Tech Support
11
Sep 11, 2015 10:15 AM
astrum
2nd Generation Specific (1986-1992)
5
Sep 7, 2015 11:41 PM
Enzo1944
New Member RX-7 Technical
2
Sep 6, 2015 08:57 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 09:22 PM.