fast idle
#1
Ozone Depleter
Thread Starter
Join Date: Jul 2002
Location: StL
Posts: 1,610
Likes: 0
Received 0 Likes
on
0 Posts
fast idle
Hey,
I've been noticing my idle is fairly fast. I'm not sure if this is just something that comes with rotary engines but here goes. When i start the car cold, it'll idle about 1500-1600. Then it'll slowly creep down as the car warms up and when @ op. temp. it'll idle @ 1200. Lemme know if i'm just paranoid or if it's something that can be/needs to be fixed
thanx,
Zach
I've been noticing my idle is fairly fast. I'm not sure if this is just something that comes with rotary engines but here goes. When i start the car cold, it'll idle about 1500-1600. Then it'll slowly creep down as the car warms up and when @ op. temp. it'll idle @ 1200. Lemme know if i'm just paranoid or if it's something that can be/needs to be fixed
thanx,
Zach
#3
5yr member, joined 2001
Your idle should be about 850, with all of your electrinics (stereo, fans, lights, etc.) turned off.
https://www.rx7club.com/forum/showth...hreadid=105324
https://www.rx7club.com/forum/showth...hreadid=105324
#4
Rotary Freak
back out the wax rod cam adjustment screw after the car warms up , this is a guess sense Iam not there to see the car .The idle should be around 850 asJonski states. also check for a vacuum leak.
Trending Topics
#9
Ozone Depleter
Thread Starter
Join Date: Jul 2002
Location: StL
Posts: 1,610
Likes: 0
Received 0 Likes
on
0 Posts
if my 1200RPM idle is nothing to really be worried about then im not gonna touch it. If it's a problem that could cause something else to go wrong then i'll have it fixed. But if it's just a minor flaw then im not touchin it.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
The1Sun
1st Generation Specific (1979-1985)
7
09-18-15 07:13 PM
RotaryBobby
1st Generation Specific (1979-1985)
1
09-10-15 01:33 PM