Hey,
I've been noticing my idle is fairly fast. I'm not sure if this is just something that comes with rotary engines but here goes. When i start the car cold, it'll idle about 1500-1600. Then it'll slowly creep down as the car warms up and when @ op. temp. it'll idle @ 1200. Lemme know if i'm just paranoid or if it's something that can be/needs to be fixed
thanx,
Zach

 

up

 

Your idle should be about 850, with all of your electrinics (stereo, fans, lights, etc.) turned off.

https://www.rx7club.com/forum/showth...hreadid=105324

 

back out the wax rod cam adjustment screw after the car warms up , this is a guess sense Iam not there to see the car .The idle should be around 850 asJonski states. also check for a vacuum leak.

 

there's no vacuum leak--the engine pulls 19-21" of vacuum on idle. i'll back out that screw and see what happens.

 

Don't mess with the fast idle cam if you don't know how it suppose to work. I try to mess with mine and now the car buck a lot during normal temp, runs hotter, and low vacuum reading...

 

my mods are in my sig. and i dont know what my LIM gasket is (just got the car 2 weeks ago)

 

if my 1200RPM idle is nothing to really be worried about then im not gonna touch it. If it's a problem that could cause something else to go wrong then i'll have it fixed. But if it's just a minor flaw then im not touchin it.