texFCturboII

iTrader: (17)

So I've got what I believe to be a s4 turbo rear iron. I need to know if there is a difference between the s4 and s5 WATER TEMP GUAGE SENSOR. I've bought a replacement sensor from what I thought was a different s4 turbo rear iron, and it doesn't fit! The threads are different sizes.... so can someone show me a side to side comparison of sensors from both series? Thanks ahead of time!

Acesanugal

iTrader: (5)

Fleabay?

texFCturboII

iTrader: (17)

tried it already

lastphaseofthis

iTrader: (8)

there is a diffrance, but you probably wouldn't motice it, i am using an s5 na water temp sensor in an s4 turbo motor, i am not sure how off the readings are, my gauge only goes up the first part of the scale, instead of 1/4, but when i get on it, and it warms up a bit, it goes up to 1/4, then drops back down, so 1/4 to me is a little hot.

Stanello

iTrader: (1)

The threads are the same size. 1/8th BSP I believe

texFCturboII

iTrader: (17)

Well I must have some weird crazy turbo iron, cuz they aren't fitting up! lol.

V8what?!

schmoo biscuits

joeylyrech

iTrader: (11)

C,mon lastphase of this you can buy the right sensor with the money that you stole from me SCAMMER https://www.rx7club.com/bad-fugly-members-185/warning-dont-do-bussines-lastphaseofthis-scammer-751721/