Warning light cluster Soldering?
#1
Rotary Adrenaline
Thread Starter
Join Date: Dec 2006
Location: Georgia
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
Warning light cluster Soldering?
Does anyone happen to know if there are any ppl out there who can resolder the warning light cluster. I remember a long time ago on Teamfc3s.org there was a guy who would do it for descent price. If you could pm me a link or any ideas on were to find wher i can get it done that would be great. Thanks
-Josh
-Josh
#2
Rotary enthusiast
Join Date: Mar 2006
Location: Connecticut
Posts: 664
Likes: 0
Received 0 Likes
on
0 Posts
if you're looking to get the clock working, you don't need any soldering skills to get that done. just buy a cheap iron and go to town on the big solder joints on the back of the clock.
it was the first thing i ever soldered
it was the first thing i ever soldered
#4
Jpk3200
Join Date: Oct 2006
Location: San Antonio, TX
Posts: 824
Likes: 0
Received 0 Likes
on
0 Posts
Take an ohm meter to the questionable contacts/traces. When repairing a solder joint, remove the old solder first. Don't just reheat the old solder. If a trace is burnt up, jumper a wire from 2 points on that trace. Done.
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
03-15-22 12:04 PM