2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

Car won't start or build oil pressure

Thread Tools
 
Search this Thread
 
Old 06-03-23, 12:29 PM
  #1  
Junior Member
Thread Starter
 
EvanSmith's Avatar
 
Join Date: Oct 2022
Location: AL
Posts: 5
Received 0 Likes on 0 Posts
Car won't start or build oil pressure

I drive an 86 gxl and while driving home last night all guages looked great and the car was running perfect, then out of nowhere the engine died and the oil pressure quickly dropped to zero even though the car was still moving and in gear. Now when cranking the car it doesnt start and the oil pressure doesn't move from zero. Any ideas?

Last edited by EvanSmith; 06-03-23 at 12:36 PM.
Old 06-03-23, 05:21 PM
  #2  
Moderator

iTrader: (3)
 
diabolical1's Avatar
 
Join Date: Feb 2002
Location: FL
Posts: 10,822
Received 307 Likes on 268 Posts
welcome to the board.

the car was running then it wasn't ... so i would say start by checking for fuel. you can get a copy of the FSM here: Foxed.ca

check the pump. if the pump is good, check for fuel at the injectors.
Old 06-03-23, 06:04 PM
  #3  
Junior Member
Thread Starter
 
EvanSmith's Avatar
 
Join Date: Oct 2022
Location: AL
Posts: 5
Received 0 Likes on 0 Posts
thats what it seems like, do you think the oil pressure should be a cause for concern though?
Old 06-03-23, 09:40 PM
  #4  
Sucker for Punishment

 
Rotary Alkymist's Avatar
 
Join Date: Oct 2011
Location: Cornwall, ON
Posts: 578
Received 125 Likes on 94 Posts
Baby steps. Jump the yellow connector under the hood, passenger side. It's the only yellow connector under in the engine bay.

Turn key on.

Confirm that your pump is running.

Post results.
Old 06-03-23, 09:51 PM
  #5  
Junior Member
Thread Starter
 
EvanSmith's Avatar
 
Join Date: Oct 2022
Location: AL
Posts: 5
Received 0 Likes on 0 Posts
fuel pump wasnt working, replaced it and now the car almost starts but then dies again after about a second
Old 06-04-23, 01:39 PM
  #6  
Moderator

iTrader: (3)
 
diabolical1's Avatar
 
Join Date: Feb 2002
Location: FL
Posts: 10,822
Received 307 Likes on 268 Posts
check if it's flooded/flooding.
Old 06-04-23, 04:45 PM
  #7  
Sucker for Punishment

 
Rotary Alkymist's Avatar
 
Join Date: Oct 2011
Location: Cornwall, ON
Posts: 578
Received 125 Likes on 94 Posts
Can you confirm that the new pump turns on with a jumper in the yellow connector and key ON? Just to make sure on our end.
Old 06-04-23, 05:35 PM
  #8  
Junior Member
Thread Starter
 
EvanSmith's Avatar
 
Join Date: Oct 2022
Location: AL
Posts: 5
Received 0 Likes on 0 Posts
i made sure the fuel pump was running and then while digging around i found where a clamp and hose had come off right after the afm, replaced the clamp and it started right back up, thanks for the help guys
Old 06-04-23, 05:42 PM
  #9  
Junior Member
Thread Starter
 
EvanSmith's Avatar
 
Join Date: Oct 2022
Location: AL
Posts: 5
Received 0 Likes on 0 Posts
just let it run and warm up but then the oil pressure started to drop as soon as the tach went under 3k. got about halfway between 0 and 30 and i shut it off
Old 06-04-23, 06:28 PM
  #10  
Moderator

iTrader: (3)
 
diabolical1's Avatar
 
Join Date: Feb 2002
Location: FL
Posts: 10,822
Received 307 Likes on 268 Posts
well, you'll want to start by checking that what the gauge is showing you is correct. check the sender and the connection there.

if your gauge turns out to be telling the truth, then you probably have a leak at the front cover o-ring/seal.
Old 06-04-23, 08:26 PM
  #11  
Sucker for Punishment

 
Rotary Alkymist's Avatar
 
Join Date: Oct 2011
Location: Cornwall, ON
Posts: 578
Received 125 Likes on 94 Posts
Glad to hear you got it running. Let's hope your oil pressure issue is just the sensor.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
JxT
2nd Generation Specific (1986-1992)
2
01-08-07 04:02 PM
KillaKitiie
2nd Generation Specific (1986-1992)
7
02-22-05 06:06 AM
KillaKitiie
2nd Generation Specific (1986-1992)
3
02-20-05 09:48 PM
foild
2nd Generation Specific (1986-1992)
5
10-23-04 11:07 PM
Louis M
3rd Generation Specific (1993-2002)
19
10-04-03 07:17 PM



Quick Reply: Car won't start or build oil pressure



All times are GMT -5. The time now is 02:42 AM.