broke something
#1
Senior Member
Thread Starter
Join Date: Jul 2010
Location: jordan ny
Posts: 375
Likes: 0
Received 0 Likes
on
0 Posts
broke something
so yesterday i commenced pulling a s5 tii engine and tranny came out fairly ez. when we had them fully out i noticed i broke the tail section by the shifter on the tranny. yes the shifter was in and for very good reason. the sides of the car were so smashed in that the metal around the shifter was pushed in to far for me to get anything on the bolts and remove the shifter. so we pulled it any way broke it in the processes. my question is. can i use the tail section from my s4 n/a tranny on the tii s5. i know the gears are slightly different but thats all ahead of this area. anyone know if this can be done? this was the less smashed in side.
Last edited by durtled; 10-04-10 at 08:26 AM.
#4
Senior Member
Thread Starter
Join Date: Jul 2010
Location: jordan ny
Posts: 375
Likes: 0
Received 0 Likes
on
0 Posts
yeah best we could do with the location we had to do it in. so looks like im buying an s5 tranny. my s4 is a little beat up the shifter is real sloppy no idea how to fix it and i want the strength of the s5 tii one. also i don't want to buy a different drive shaft cause i pulled the rear end out also.
Last edited by durtled; 10-04-10 at 12:02 PM. Reason: i r grammer
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
ls1swap
3rd Generation Specific (1993-2002)
12
10-01-15 07:58 PM