Wolf 3D Wolf V4
#3
Rotary Enthusiast
Join Date: Feb 2004
Location: North Queensland Australia
Posts: 778
Likes: 0
Received 0 Likes
on
0 Posts
Hi 13BT_Starlet can you give us a little more detail like the version of Wolf, Injector size Turbo size etc and maybe we can get you going
Cheers
Michael Smith
Cheers
Michael Smith
#5
Rotary Enthusiast
Join Date: Feb 2004
Location: North Queensland Australia
Posts: 778
Likes: 0
Received 0 Likes
on
0 Posts
13BT_Starlet I have attached my own map my engine uses 550/1000 injectors and has a Hi Flow s4 turbo and 3 inch exhaust with a modified CAS like for a Version 3. You will need to modify the CAS setting to suit your motor. This will be rich for your engine also you will need look at my initial timing of 60 deg btdc your engine is different. You will need to search this forum for the required setting for Crank and CAS.. You may find my Rotary Pulse recalculator helpful just google it you will find my web site
Cheers
Michael Smith
Merry Christmas
Cheers
Michael Smith
Merry Christmas
Trending Topics
#11
Here is my email rcnturbo77@gmail.com , Thanks .
#13
Rotary Enthusiast
Join Date: Feb 2004
Location: North Queensland Australia
Posts: 778
Likes: 0
Received 0 Likes
on
0 Posts
The map is unrestricted so 23 psi for the whole map. I run from 5 psi to 10 psi ..I haven't had to use the upper part of the map yet....but I am saving that for a special occasion....I have got someone to toast.
Cheers
Michael Smith
Cheers
Michael Smith
#15
Rotary Enthusiast
Join Date: Feb 2004
Location: North Queensland Australia
Posts: 778
Likes: 0
Received 0 Likes
on
0 Posts
I bet your Starlet would be fun to drive, do you still have the standard wheels? I could see a someone in turbo Nissan with a very strange look on there face wondering where the fog was coming from as they get toasted at the lights.
Cheers
Michael Smith
Cheers
Michael Smith
#16
Being that is a short wheel base is a work at the wheel any little mistake and it could land on its roof.
My starlet is being done 3/4 chassis at the moment , the wheels are going to be the holeshot hole pro 2 with the beadlock on the rear http://www.holeshotwheels.com/performance_wheels.html
. wheelbase is going to be 3" longer that factory and chassis is chromemoly . My engine,tranny,ecu,turbo and etc is going on my friends( AKA Engine Builder)2nd gen for the mean time till my car gets done
My starlet is being done 3/4 chassis at the moment , the wheels are going to be the holeshot hole pro 2 with the beadlock on the rear http://www.holeshotwheels.com/performance_wheels.html
. wheelbase is going to be 3" longer that factory and chassis is chromemoly . My engine,tranny,ecu,turbo and etc is going on my friends( AKA Engine Builder)2nd gen for the mean time till my car gets done
Thread
Thread Starter
Forum
Replies
Last Post