Wolf V4
I need a base map for S6 3rd Gen , if someone could share one with me I really appreciate it .
|
Was up Wolf owners ?can one of you guys help me out with a 93-95/ S6 base map that was provided from wolf when purchase the unit . I really appreciate it
|
Hi 13BT_Starlet can you give us a little more detail like the version of Wolf, Injector size Turbo size etc and maybe we can get you going
Cheers Michael Smith |
Originally Posted by Michael Smith
(Post 8816449)
Hi 13BT_Starlet can you give us a little more detail like the version of Wolf, Injector size Turbo size etc and maybe we can get you going
Cheers Michael Smith The ECU is a Wolf 3d V4 , Engine is a 13B RE with big street port injectors are 850cc Prim and 1000cc sec , The turbo is a T70 with 1.15ar diveded boost around 15 -20 psi . Thanks in Advance |
1 Attachment(s)
13BT_Starlet I have attached my own map my engine uses 550/1000 injectors and has a Hi Flow s4 turbo and 3 inch exhaust with a modified CAS like for a Version 3. You will need to modify the CAS setting to suit your motor. This will be rich for your engine also you will need look at my initial timing of 60 deg btdc your engine is different. You will need to search this forum for the required setting for Crank and CAS.. You may find my Rotary Pulse recalculator helpful just google it you will find my web site :)
Cheers Michael Smith Merry Christmas |
I can't open it , could you send it open to my PM ? Also do you have the stock plug and play map for the 3rd Gen's ? if you do could you send it also . Thank You N Happy Holidays !
Regards Gilbert |
if you engine is a 13b-re try bdc map from my car is posted a few threads below. it is street ported, oem cas,it is rich at boost but excellent at vac.
|
Originally Posted by rx7dky
(Post 8829463)
if you engine is a 13b-re try bdc map from my car is posted a few threads below. it is street ported, oem cas,it is rich at boost but excellent at vac.
|
Originally Posted by rx7dky
(Post 8829463)
if you engine is a 13b-re try bdc map from my car is posted a few threads below. it is street ported, oem cas,it is rich at boost but excellent at vac.
|
did you try saving it first then open it with the wolf software?. pm me you email and i will email it to you if you still having problems
|
Here is my email rcnturbo77@gmail.com , Thanks .
|
Hello Guy's , I got the maps to open it was a software issue .
Michael , how much boost are you running with this base map ? and Thanks to both of you guys . Regards Gilbert |
The map is unrestricted so 23 psi for the whole map. I run from 5 psi to 10 psi ..I haven't had to use the upper part of the map yet....but I am saving that for a special occasion....I have got someone to toast.
Cheers Michael Smith |
Hello , Michael Thanks again I'll keep you guys updated. Don'ttoast them to hard LOL
|
I bet your Starlet would be fun to drive, do you still have the standard wheels? I could see a someone in turbo Nissan with a very strange look on there face wondering where the fog was coming from as they get toasted at the lights. :lol:
Cheers Michael Smith |
Being that is a short wheel base is a work at the wheel any little mistake and it could land on its roof.
My starlet is being done 3/4 chassis at the moment , the wheels are going to be the holeshot hole pro 2 with the beadlock on the rear http://www.holeshotwheels.com/performance_wheels.html . wheelbase is going to be 3" longer that factory and chassis is chromemoly . My engine,tranny,ecu,turbo and etc is going on my friends( AKA Engine Builder)2nd gen for the mean time till my car gets done |
that should be one fun project..... Can't wait to see it done. Good Luck!!!!
|
Originally Posted by Turbo Tech
(Post 8954941)
that should be one fun project..... Can't wait to see it done. Good Luck!!!!
|
All times are GMT -5. The time now is 12:58 AM. |
© 2024 MH Sub I, LLC dba Internet Brands