mild ported t2 dyno 236 hp 187 tq @ 9psi.
Thread Starter
Joined: Nov 2003
Posts: 4,370
Likes: 4
From: 626 So Cal
mild ported t2 dyno 236 hp 187 tq @ 9psi.
well i finnaly got Dave (Guitarjunkie) to dyno tune my car today.
he got it to run 11 AFR's across the RPM band.
mods are:
freshly rebuilt jspec 13bt.
very mild street port.
full intake, and straight exhaust.
720cc secondaries controlled by safc2.
ported wastegate on stock rebuilt turbo.
running 9psi.
stock Top Mount Intercooler.
236 hp 187 tq @ a conservative 9psi.
he got it to run 11 AFR's across the RPM band.
mods are:
freshly rebuilt jspec 13bt.
very mild street port.
full intake, and straight exhaust.
720cc secondaries controlled by safc2.
ported wastegate on stock rebuilt turbo.
running 9psi.
stock Top Mount Intercooler.
236 hp 187 tq @ a conservative 9psi.
it wasn't hitting full boost until ~4k-4200 rpm.
btw, i think i have an s4 snail at my buddies house. i can port that wastegate and slap that on...we can see what that does to the spoolup.
in any case, it's pretty good numbers for the boost level.
btw, i think i have an s4 snail at my buddies house. i can port that wastegate and slap that on...we can see what that does to the spoolup.
in any case, it's pretty good numbers for the boost level.
Trending Topics
Nice numbers! The port couldn't be too small considering the hp numbers on only 9 psi.
Get that wastegate problem fixed and your torque curve will be much nicer...my stock S5 turbo spools almost instantly!
Get that wastegate problem fixed and your torque curve will be much nicer...my stock S5 turbo spools almost instantly!
Originally Posted by arghx
yeah that torque is really low... my buddy had a similar setup (except stock ports) and he put down 250rwhp/280rwtq at I think 14psi
Originally Posted by MrDirt
Your friend made a ton of torque because his turbo is maxed out at low in the RPM range. If he was running a suitable turbo for his setup, you would see the HP numbers far exceed the torque.
^ exactly.. 240 horse, 280 tq isn't uncommon.. boost curve looks like a big rainbow, and torque usually looks just like an upside down "V" though

this one HELD 9psi with late spoolup all the way to redline.
Thread
Thread Starter
Forum
Replies
Last Post
HalifaxFD
Canadian Forum
126
May 9, 2016 07:06 PM
Clacor
Single Turbo RX-7's
19
Sep 11, 2015 08:36 PM






Congrats on your numbers fris! 
